Nitsuko Ds2000 Software Manual

0500 - System Numbering
0510 - ACD/UCD Master Extension Numbers and Names
DS2000 Software Manual Chapter 2: Programming403
2. 0510 + HOLD
3. Enter the number of the group you want to program (1-8) + HOLD.
The previously programmed extension number displays.
4. Enter the number of the extension you want assigned to the group.
OR
Press 
HOLD to leave the entry unchanged.
The previously programmed name displays.
5. Enter the name for the group (10 character maximum) + 
HOLD
OR
Press 
HOLD to leave the...

0500 - System Numbering
0511 - Ring Group Master Extension Numbers and Names
404Chapter 2: ProgrammingDS2000 Software Manual
0511 - Ring Group Master Extension Numbers and Names
Description
Use Program 0511- Ring Group Master Extension Numbers and Names to assign extension 
numbers and names to the Ring Group master extensions. The system can have up to eight Ring 
Groups (1-8). The extension numbers you enter must be unique and not overlap extension numbers 
used for trunks, extensions, ACI ports, DCI...

0500 - System Numbering
0511 - Ring Group Master Extension Numbers and Names
DS2000 Software Manual Chapter 2: Programming405
Telephone Programming Instructions
1. Enter the programming mode.
2. 0511 + 
HOLD
3. Enter the number of the group you want to program (1-8) + HOLD.
The previously programmed extension number displays.
4. Enter the number of the extension you want assigned to the group.
OR
Press 
HOLD to leave the entry unchanged.
The previously programmed name displays.
5. Enter the name for the...

0600 - Toll Restriction
0601 - Toll Restriction Options
406Chapter 2: ProgrammingDS2000 Software Manual
0600 - Toll Restriction
0601 - Toll Restriction Options
Description
Use Program 0601- Toll Restriction Options to assign Toll Restriction options to each of the 
seven Toll Levels (1-7). When you assign a Toll Level to an extension, the extension uses the 
options set up in this program. 
Conditions
NoneLCCPU 01.00.00 Not available.
Table 30:  Program 0601 - Toll Restriction Options...

0600 - Toll Restriction
0601 - Toll Restriction Options
DS2000 Software Manual Chapter 2: Programming407
0 + DialingUse this option to enable or disable an exten-
sion’s ability to manually dial 0 + (operator 
assisted) calls.
• See Toll Restriction on page 314 for 
more.0 + DIALING?Y = Enable
N = DisableY
International DialingUse this option to enable or disable 011 
(international) dialing.
• See Toll Restriction on page 314 for 
more.INT’L DIAL?Y = Enable
N = DisableY
Equal Access DialingThis option...

0600 - Toll Restriction
0601 - Toll Restriction Options
408Chapter 2: ProgrammingDS2000 Software Manual
NPA DialingThis option allows/prevents an extension 
user from directly dialing NPA (area code) 
calls. The system compares the NPA codes 
the user dials to the NPA table that you pro-
gram.
• See Toll Restriction on page 314 for 
more.
• See Toll Restriction Rules on page 317 
for more.NPA DIALING
ALLOW OR DENY 
TABLE?
A = Allow Table
D = Deny TableA
(Allow table)
• Enter A to set the table up as an...

0600 - Toll Restriction
0601 - Toll Restriction Options
DS2000 Software Manual Chapter 2: Programming409
Telephone Programming Instructions
To quickly locate the procedure for a Toll Restriction option, go to the steps listed below:
To select the Toll Level you want to program, go to step 4.
To enable or disable Active Dial Pad, go to step 5.
If setting up N11 Dialing, go to step 6.
When enabling or disabling 0+ Dialing, go to step 7.
For International Dialing options, go to step 8.
When...

0600 - Toll Restriction
0601 - Toll Restriction Options
410Chapter 2: ProgrammingDS2000 Software Manual
OR
Press 
VO L  to select the currently displayed value.
The previously programmed value displays
0+ Dialing
7. Enter Y to enable or N to disable 0+ Dialing + 
VO L .
OR
Press 
VO L  to select the currently displayed value.
The previously programmed value displays
International Dialing
8. Enter Y to enable or N to disable International Dialing + 
VO L .
OR
Press 
VO L  to select the currently...

0600 - Toll Restriction
0601 - Toll Restriction Options
DS2000 Software Manual Chapter 2: Programming411
The previously programmed table type displays (A = allow, D = deny).
NXX Dialing
12. Enter A to set up the table as an allow table.
OR
Enter D to set up the table as a deny table.
OR
Enter D to convert an existing allow table into a deny table, or enter A to convert an 
existing deny table into an allow table.
13. Press A to add codes into the table.
OR
Press D to delete codes from the table.
OR...

0600 - Toll Restriction
0601 - Toll Restriction Options
412Chapter 2: ProgrammingDS2000 Software Manual
is additional data in the table to view.
If you press A or D to add codes into the table, you see the prompt 
DATA. Just enter the 
codes you want into the table. When entering data, new data appears to the right of the 
previously entered data. (The system automatically assumes that every group of three dig-
its is an entry.) 
17. When you are done entering data, press 
VO L  to go to the next...