Nitsuko Ds2000 Software Manual

1000 - Trunk Programming
1001 - Trunk Port Description
DS2000 Software Manual Chapter 2: Programming423
OR
Press 
CONF twice to exit the program. 

1000 - Trunk Programming
1002 - Trunk Groups
424Chapter 2: ProgrammingDS2000 Software Manual
1002 - Trunk Groups
Description
Use Program 1002 - Trunk Groups to assign trunks (1-16) to trunk groups (0-8). This program 
also lets you assign the priority of trunks within each group. When a user seizes a trunk group, the 
system selects the lowest order trunk in the group first. If the lowest order trunk is busy or out of 
service, the system searches sequentially by order number (e.g., from order 01 to...

1000 - Trunk Programming
1002 - Trunk Groups
DS2000 Software Manual Chapter 2: Programming425
OR
Press 
CONF to exit the program. 

1000 - Trunk Programming
1003 - Trunk Options
426Chapter 2: ProgrammingDS2000 Software Manual
1003 - Trunk Options
Description
Use Program 1003 - Trunk Options to program various options for trunks.
Also see Program 1001 - Trunk Port Description on page 416.
Conditions
NoneLCCPU 01.00.00 Available.
Table 34:  Program 1003 - Trunk Options (Part 2)
OptionDescriptionEntriesDefault
Call Pickup Group
Use this option to have an incoming call on 
the trunk ring all the extensions in the 
assigned pickup...

1000 - Trunk Programming
1003 - Trunk Options
DS2000 Software Manual Chapter 2: Programming427
Telephone Programming Instructions
1. Enter the programming mode.
2. 1003 + 
HOLD
Press CONF at any time to back up to the previous entry. This automatically saves 
your data entry,
Activate Overflow at 
NightUse this option the enable or disable Night 
Ring (Universal Night Answer). If enabled, 
the trunk will activate UNA if it rings while 
the system is in the night mode.
• See Direct Inward Line on page 88...

1000 - Trunk Programming
1003 - Trunk Options
428Chapter 2: ProgrammingDS2000 Software Manual
3. Select the trunk port you want to program + HOLD.
 The previously programmed Pickup Group displays.
4. Enter the number of the Pickup Group to which the trunk should belong (1-8, 0 for unas-
signed) + 
HOLD.
OR
Press 
VO L  to leave the current assignment unchanged and advance to the next entry.
 The previously programmed assignment displays.
5. Enter the day mode termination for the trunk + 
HOLD.
OR
Press...

1000 - Trunk Programming
1003 - Trunk Options
DS2000 Software Manual Chapter 2: Programming429
11. Enter the Distinctive Ringing tone for the trunk (1-8) + HOLD.
OR
Press 
VO L  to leave the current assignment unchanged and advance to the next entry.
The previously programmed assignment displays.
12. Enter the MOH source for the trunk (0 = No MOH, 1 = External at CPU terminals, 2 = Tone 1 
[low pitch], 3 = Tone 2 [high pitch], 4 = ACI port [currently not used]) + 
HOLD.
OR
Press 
VO L  to leave the...

1000 - Trunk Programming
1004 - Loop Group Assignment
430Chapter 2: ProgrammingDS2000 Software Manual
1004 - Loop Group Assignment
Description
LCCPU 01.00.00 Not available. 

1100 - Speed Dial
1101 - System Speed Dial Numbers
DS2000 Software Manual Chapter 2: Programming431
1100 - Speed Dial
1101 - System Speed Dial Numbers
Description
Use Program 1101 - System Speed Dial Numbers to enter numbers and names into the System 
Speed Dial bins. The system has up to 1000 Speed Dial bins, depending on the setting of Program 
0301 - Number of Digits in a System Speed Dial Code on page 370.
Speed Dial numbers can be up to x?x? digits long, use 0-9, # and *. In addition, you can enter...

1100 - Speed Dial
1101 - System Speed Dial Numbers
432Chapter 2: ProgrammingDS2000 Software Manual
Telephone Programming Instructions
1. Enter the programming mode.
2. 1101 + 
HOLD
The previously programmed bin displays.
3. Select the System Speed Dial bin you want to program (20-29, 200-299 or 2000-2999) + 
HOLD.
OR
Press 
VO L  to program the currently selected bin.
The System Speed Dial number previously programmed for this selected bin displays.
4. Enter the System Speed Dial number for the...