Nitsuko Ds2000 Software Manual

0700 - Analog Communications Interface (ACI)
0701 - Analog Communications Interface (ACI) Options
DS2000 Software Manual Chapter 2: Programming413
0700 - Analog Communications Interface (ACI)
0701 - Analog Communications Interface (ACI) Options
Description
LCCPU 01.00.00 Not available. 

0800 - Display Messages
0801 - Selectable Display Messages
414Chapter 2: ProgrammingDS2000 Software Manual
0800 - Display Messages
0801 - Selectable Display Messages
Description
Use Program 0801 - Selectable Display Messages to program the system’s 16 Selectable Display 
Messages. Each message can be up to 20 characters long, including a blank spaces you may want to 
ad for readability. All messages are appendable by user-entered digits.
When entering names, use Table 17: Keys for Entering Names on page...

0800 - Display Messages
0801 - Selectable Display Messages
DS2000 Software Manual Chapter 2: Programming415
1. Enter the programming mode.
2. 0801 + 
HOLD
3. Enter the number of the message you want to program + HOLD.
 The previously programmed message displays.
4. Enter the new display message + 
HOLD.
When entering a message, refer to 0506 - ACI/CPU Analog Port Extension Numbers 
and Names on page 400.
OR
Press 
HOLD to leave the current value unchanged.
0801:DISPLAY MESSAGE
MESSAGE NUM?
0801:DISPLAY...

1000 - Trunk Programming
1001 - Trunk Port Description
416Chapter 2: ProgrammingDS2000 Software Manual
1000 - Trunk Programming
1001 - Trunk Port Description
Description
Use Program 1001 - Trunk Port Description to program various options for trunks ports. 
Also see Program 1003 - Trunk Options on page 426.
Conditions
Per FCC regulations, do not set 1001- Trunk Transmit Gain on page 417 higher than 0 dB. LCCPU 01.00.00 Available.
Table 32:  Program 1001 - Trunk Port Description...

1000 - Trunk Programming
1001 - Trunk Port Description
DS2000 Software Manual Chapter 2: Programming417
Trunk Transmit  GainUse this option to set the trunk’s transmit 
gain. This gain setting allows you to com-
pensate for the transmit gain characteristics 
of the connected telco or PBX.
• See Central Office Calls, Answering on 
page 58 for more.
• See Central Office Calls, Placing on 
page 63 for more.
• See Direct Inward Dialing on page 87 
for more.
•
• See PBX/Centrex Compatibility on 
page 222 for...

1000 - Trunk Programming
1001 - Trunk Port Description
418Chapter 2: ProgrammingDS2000 Software Manual
TRANSMIT GAIN? 
(Cont’d)
31 = .5 dB loss
32 = 1 dB loss
33 = 1.5 dB loss
34 = 2 dB loss
35 = 2.5 dB loss
36 = 3 dB loss
37 = 3.5 dB loss
38 = 4 dB loss
39 = 4.5 dB loss
40 = 5 dB loss
41 = 5.5 dB loss
42 = 6 dB loss
43 = 6.5 dB loss
44 = 7 dB loss
45 = 7.5 dB loss
46 = 8 dB loss
47 = 8.5 dB loss
48 = 9 dB loss
49 = 9.5 dB loss
50 = 10 dB loss
51 = 10.5 dB loss
52 = 11 dB loss
53 = 11.5 dB loss
54 = 12...

1000 - Trunk Programming
1001 - Trunk Port Description
DS2000 Software Manual Chapter 2: Programming419
Trunk Receive GainUse this option to set the trunk’s receive 
gain. This gain setting allows you to com-
pensate for the receive gain characteristics of 
the connected telco or PBX.
• See Central Office Calls, Answering on 
page 58 for more.
• See Central Office Calls, Placing on 
page 63 for more.
• See Direct Inward Dialing on page 87 
for more.
•
• See PBX/Centrex Compatibility on 
page 222 for...

1000 - Trunk Programming
1001 - Trunk Port Description
420Chapter 2: ProgrammingDS2000 Software Manual
RECEIVE GAIN? 
(Cont’d)
31 = .5 dB loss
32 = 1 dB loss
33 = 1.5 dB loss
34 = 2 dB loss
35 = 2.5 dB loss
36 = 3 dB loss
37 = 3.5 dB loss
38 = 4 dB loss
39 = 4.5 dB loss
40 = 5 dB loss
41 = 5.5 dB loss
42 = 6 dB loss
43 = 6.5 dB loss
44 = 7 dB loss
45 = 7.5 dB loss
46 = 8 dB loss
47 = 8.5 dB loss
48 = 9 dB loss
49 = 9.5 dB loss
50 = 10 dB loss
51 = 10.5 dB loss
52 = 11 dB loss
53 = 11.5 dB loss
54 = 12...

1000 - Trunk Programming
1001 - Trunk Port Description
DS2000 Software Manual Chapter 2: Programming421
Telephone Programming Instructions
1. Enter the programming mode.
2. 1001 + 
HOLD
3. Enter the number of the trunk you want to program (1-16) + HOLD.
 The previously programmed value displays.
4. Enter the new trunk circuit type + 
VO L .
OR
Press 
VO L  to leave the current circuit type unchanged
The extension number programmed in 0504 - Trunk Port Extension Numbers on 
page 396displays. You cannot...

1000 - Trunk Programming
1001 - Trunk Port Description
422Chapter 2: ProgrammingDS2000 Software Manual
OR
Press 
VO L  to leave the transmit gain unchanged
8. Enter the new receive gain + 
VO L .
OR
Press 
VO L  to leave the current receive gain unchanged
9. Enter the new Class of Service for the trunk + 
VO L .
OR
Press 
VO L  to leave the current Class of Service unchanged
10. Enter Y ro assign or N to unassign the line as a PBX line + 
VO L .
OR
Press 
VO L  to leave the current assignment...