Nitsuko Ds2000 Software Manual

0100 - Class of Service
0101 - Class of Service Options
DS2000 Software Manual Chapter 2: Programming363
Extended RingUse this option to enable or disable 
Extended Ringing at the extension.
• See Extended Ringing on page 119 for 
more.EXTENDED RING?Y = Enabled
N = DisableN
PrivacyUse this option to enable or disable Privacy 
at the extension.
• See Privacy on page 226 for more.PRIVACY?
Y = Enable
N = DisableN
Trunk (Line) Queuing 
PriorityUse this option to enable or disable Trunk 
(Line) Queuing...

0100 - Class of Service
0101 - Class of Service Options
364Chapter 2: ProgrammingDS2000 Software Manual
Access Page Zone 5Use this option to enable or disable an exten-
sion’s ability to make a Paging announce-
ment into zone 5.
• See Paging on page 214 for more.PAGE ZONE 5?Y = Enable
N = DisableY
Access Page Zone 6Use this option to enable or disable an exten-
sion’s ability to make a Paging announce-
ment into zone 6.
• See Paging on page 214 for more.PAGE ZONE 6?Y = Enable
N = DisableY
Access Page...

0100 - Class of Service
0101 - Class of Service Options
DS2000 Software Manual Chapter 2: Programming365
Remote Call Forwarding / 
Alternate Attendant• This option is currently not imple-
mented. REMOTE FWRD?Y = Enable
N = DisableCOS 1 = Y
COS 2-15 = N
Soft KeysUse this option to enable or disable a display 
set’s Interactive Soft Keys.
• See See Interactive Soft Keys on 
page 163 for more.SOFTKEYSY = Enable
N = DisableY
Conversation RecordUse this option to enable or disable an exten-
sion’s ability to...

0100 - Class of Service
0101 - Class of Service Options
366Chapter 2: ProgrammingDS2000 Software Manual
Telephone Programming Instructions
1. Enter the programming mode.
2. 0101 + 
HOLD
3. Dial the Class of Service you want to program (1-15) + HOLD
4. Press VO L  or VO L  to scroll to the option you want to change + HOLD
5. Enter Y or N for displayed option + HOLD
6. Press VO L  or VO L  to scroll to another option.
OR
Press 
HOLD to return to step 3 and select another Class of Service.
OR
Press...

0200 - Tenant Options
0201 - Tenant Option Programming
DS2000 Software Manual Chapter 2: Programming367
0200 - Tenant Options
0201 - Tenant Option Programming
Description
Use Program 0201- Tenant Option Programming to set up various options for Tenant Groups. 
Conditions
NoneLCCPU 01.00.00 Available.
Table 19:  Program 0201 - Tenant Options
OptionDescriptionEntriesDefault
Call Waiting  (Camp-On) 
Tone
Use this option to enable or disable system 
wide Call Waiting Tones (double beeps).
• See Call Waiting...

0200 - Tenant Options
0201 - Tenant Option Programming
368Chapter 2: ProgrammingDS2000 Software Manual
Background MusicUse this option to enable or disable Back-
ground Music system-wide.
• See Background Music on page 35 for 
more.ENBLE BGM?Y = Enable
N = DisableY
Voice Mail InstalledEnable this option if you have an NVM-
series Voice Mail system installed. Disable 
this option if you don’t have Voice Mail 
installed. If you enable this option, be sure to 
specify a Voice Mail master extension num-
ber...

0200 - Tenant Options
0201 - Tenant Option Programming
DS2000 Software Manual Chapter 2: Programming369
Telephone Programming Instructions
1. Enter the programming mode.
2. 0201 + 
HOLD
3. Enter Y or N for the displayed option.
OR
Press 
VO L  or VO L  to scroll to the option you want to change + HOLD
4. Enter Y or N for displayed option + HOLD
5. Press VO L  or VO L  to scroll to another option.
OR
Press 
HOLD to return to step 2 and enter another program number.
0101:TENANT OPTIONS
CALL WAIT?XX 

0300 - System Options
0301 - System Options (Part 1)
370Chapter 2: ProgrammingDS2000 Software Manual
0300 - System Options
0301 - System Options (Part 1)
Description
Use Program 0301- System Options to set up various options system-wide options. 
Conditions
NoneLCCPU 01.00.00 Available.
Table 20: Program 0301 - System Options
OptionDescriptionEntriesDefault
Number of Operators
Use this option to set the number of opera-
tors (attendants) in the system. The system 
can have up to four operators.
• See...

0300 - System Options
0301 - System Options (Part 1)
DS2000 Software Manual Chapter 2: Programming371
Telephone Programming Instructions
1. Enter the programming mode.
2. 0301 + 
HOLD
3. Enter Y or N for the displayed option.
OR
Press 
VO L  or VO L  to scroll to the option you want to change + HOLD
4. Enter Y or N for displayed option + HOLD
5. Press VO L  or VO L  to scroll to another option.
OR
Press 
HOLD to return to step 2 and enter another program number.
CPU Baud RateUse this option to set...

0300 - System Options
0302 - System Identification
372Chapter 2: ProgrammingDS2000 Software Manual
0302 - System Identification
Description
Use Program 0302- System Identification enter information about the system and to set the Time 
and Date. This information is used in various system reports. 
Conditions
NoneLCCPU 01.00.00 Available.
Table 21:  Program 0302 - System Identification Options
OptionDescriptionEntriesDefault
Company Name
Use this option to enter your company’s 
name. The name prints in...