Nitsuko Digital System Administrators Guide

To cancel Call
Forwarding: 
The attendant can also cancel your Call Forwards (see
Call Forwarding Cancel on page 47).  A power failure,
system reset, or activating Do Not Disturb cancels them
automatically. 
1.Lift handset. 
-Press ICM (except at ESL set). 
2.Dial # and hang up. 
-MSG key goes out. 
Understanding Related Programming
Program 1To enable/disable Internal Call Forwarding in a Class of
Service (CALL FWD = Y or N + #) (see also Program 18
[I])
Program 18 (I)To assign a Class of Service (from...

C all F orwa rding, Off-Premise
&
Go home early in the day and have your calls follow you there or to
your car phone. 
If your phone has Direct Inward Lines, Off-Premise Call Forwarding lets you reroute
calls on those lines to an outside telephone number.  
Note:  To use Call Forwarding, the DIGITAL SYSTEM must be equipped with a
Line module that provides disconnect supervision.  In addition, the connected CO
line must also provide disconnect supervision.
Initial Configuration 
Off-Premise Call...

C all F orwa rding S ystem C anc el
&
With Call Forwarding Cancel you can, as the attendant, return the
system to normal status at the end of the work day or after the
weekend so incoming calls ring their normal (not forwarded)
destinations. 
If you are an attendant, Call Forwarding System Cancel lets you cancel all Call
Forwarding conditions in the system at once.  Using Call Forwarding System Cancel
also cancels three other conditions system-wide: Do Not Disturbs, Personal
Greetings and Selectable...

C all I nter ce pt
&
Users quickly know when they dial an invalid code. 
Call Intercept sends fast busy tone to anyone who dials an invalid code while making
a call.  In other words, the system automatically prevents (intercepts) an invalid call.
Initial Configuration 
Intercept always occurs when appropriate
Using the Feature
N/A
Understanding Related Programming
N/A 
Call Intercept
48 DIGITAL SYSTEM Administrator’s Guide 

C all Time r
&
Easily keep track of how much time you spend on a call.
If you have a Display Phone, the Call Timer feature lets you time your outside calls.
The duration shows on your display.
Your phone can be programmed for Automatic or Manual Call Timer: 
·With Automatic Call Timer, the timer automatically starts when you establish an
incoming or outgoing call. 
·With Manual Call Timer, you start the timer by pressing the Manual Call Timer
key. 
In addition, you can use the Call Timer feature while...

C allba ck
&
Save time retrying a busy extension.  The DIGITAL SYSTEM calls
you back when it becomes idle. 
When you make an Intercom call and get busy tone, you can place a Callback
request, hang up, and continue using your extension.  The system then does the
following for you: 
·Monitors the busy extension and your extension, and calls you back (rings you)
when both extensions are free. 
·Calls the previously busy extension when you answer the callback ring. 
You can leave one Callback per busy...

C alle r I D
&
See your callers name and number before you answer.
Caller ID requires software version AUX Module 2.10/ Base 02.00 or higher.
If your phone has a display, Caller ID can show your incoming caller’s number and
optional name. The Caller ID information will show as either a post-answer or
pre-answer display. With the post-answer display, you’ll see the caller’s number and
optional name after you answer the call. The pre-answer display lets you see the
caller’s number and optional name before...

In addition to displaying the DN and name, Caller ID can also display several unique
messages received from the telco:
MessageDescription
PRIVATE Caller has blocked Caller ID.
Telco will not pass the DN.
OUT OF AREA Caller has dialed from an area
that does not support Caller ID.
UNAVAILABLE Telco’s Caller ID is out of
service.
Your system provides unique displays for incoming Caller ID (CND) and non-Caller
ID (non-CND) trunks. The information a display keyset user sees depends on the
type of incoming...

·Caller ID information prints on the SMDR report along with other call informa-
tion. SMDR requires an AUX Module and an SMDR collection device or
printer. Refer to the DIGITAL SYSTEM Feature and Terminal Programming
Manual for more about SMDR.
Initial Configuration
·Caller ID enabled automatically after you install a Caller ID Module.
·Caller ID pre-answer display disabled (i.e., Automatic Handsfree enabled).
Caller ID
Part I:  DIGITAL SYSTEM Features 53 

Using the Feature
To answer a Caller ID call
(with the pre-answer
display disabled):
1.Lift handset or press flashing line key.
-You see the incoming caller’s name and number
and you answer the call.
To answer a Caller ID call
(with the pre-answer
display enabled):
(Your phone must have Automatic Handsfree disabled to
use this feature.)
1.Press the flashing line key to display the incoming
caller’s phone number.
-You can press another flashing line key instead of
going to the next step.
2.Press the...