Nitsuko Digital System Administrators Guide

Part II
DIGITAL SYSTEM Programs
  
Part II:  DIGITAL SYSTEM Programs 195 

- For your notes -
196 DIGITAL SYSTEM Administrator’s Guide 

Progra mming Sy stem Options
P rogram 1: C lass of Se rvic e
&
Program 1 is initially set as follows for each COS: 
·Only Intercom Calls at Night = N 
·Off-Premise Call Forward = N 
·Break-In (Intrusion) = Y for COS 00; N for COS 01-27 
·Camp-On (Busy Extension) = Y 
·Internal Call Forwarding = Y 
·System Speed Dial Access = Y 
·Toll Restriction Level = 00 (not restricted) 
·Only Local Calls (Day or Night) = N 
·Only Local Calls at Night = N 
·Extended Ring = N 
·Privacy = N 
·Callback (Line Queuing)...

Off-Premise Call Forward
Use this option to allow/deny Off-Premise Call Forwarding.
FOR FEATURE INFORMATION:See Call Forwarding, Off-Premise on page 46.
Break-In (Intrusion) 
Use this option to allow/deny Intrusion (Barge-In).  Extensions programmed for
Intrusion cannot intrude upon extensions programmed for Privacy (see below).
FOR FEATURE INFORMATION:   See Intrusion (Barge-In) on page 106. 
Camp-On to Busy Extension 
Use this option to allow/deny Camp-On to a busy extension.
FOR FEATURE...

The extension will not be able to place toll (1 + NNX) or long distance calls to other
area codes even if the extension’s COS has a Toll Restriction Level (see above) that
normally allows them. 
FOR FEATURE INFORMATION:   N/A
Extended Ring 
Use this option to enable/disable Extended Ringing.
FOR FEATURE INFORMATION:   See Extended Ringing on page 80.
Privacy 
Use this option to enable/disable Privacy.
FOR FEATURE INFORMATION:   See Privacy on page 148.
Callback (Line Queuing) Priority 
Use this option to...

Note:  Entering Y for No Flash for Single Line means the system does not support
Flash for Single Line phones, while entering N means it does.
FOR FEATURE INFORMATION:   See Flash on page 85 and Automatic Call Distribution
on page 36.
Single Ring for ASI Calls or Only CO Calls Call Forward to Voice Mail
Use this option to enable/disable a Single Ring for calls into an Analog Station
Interface (ASI).  If you enable Single Ring, outside calls, Intercom calls, and
Callbacks ring with a single ring repeated...

Entering Data Into Memory
To enter Program 1 data:1.Enter program mode. 
-Press # + dial SP + dial 5312 + press #. 
2.Press key 1 to enter Program 1. 
3.Dial COS No., press #. 
4.To accept the displayed data:  Press #. 
OR 
To change or enter data:  Dial data, press #. 
-To erase data before pressing #:  Dial *. 
5.Repeat step 4 for all data. 
-If you finish and do not see COS. NO.:  Press
SAVE before step 6. 
6.Select an option:
To program another COS:  Go to step 3.
OR
To exit Program 1:  Press SAVE...

P rogram 2: Intercom S ignaling
&
Program 2 is initially set as follows: 
·Call Waiting (Camp-On) Tones = Y 
·Handsfree Reply on Intercom Calls = Y 
·Voice-Announced Intercom Calls = Y 
·Automatic Handsfree = Y 
Program 2 lets you enable or disable the following options for all extensions in the
system:
Call Waiting (Camp-On) Tones 
Use this option to enable/disable Call Waiting Tones (double-beeps).
If you assign Off-Hook Ringing to a particular extension (Program 18 [I]), the
system converts its Call...

Filling Out the Program Record Form
In this box . . .Enter this data . . .
A feature’s data box Y to enable the feature
N to disable the feature
Example 
Voice-Announced Intercom calls are disabled.
Entering Data Into Memory
To enter Program 2 data:1.Enter program mode. 
-Press # + dial SP + dial 5312 + press #. 
2.Press key 2 to enter Program 2. 
3.To accept the displayed data:  Press #. 
OR 
To change or enter data:  Dial data, press #. 
-To erase data before pressing #:  Dial *. 
4.Repeat step 3 for...

To enable/disable Privacy for an extension in a Class of
Service (see also Program 18 [I]). If enabled, an extension
does not receive Call Waiting tones. 
Program 18 (I)To assign a Class of Service (from Program 1) to an
extension
To have an extension hear the Call Waiting tones as
Off-Hook Ringing instead of a double beep
Program 4To set the Rings Before Recall timer (how long a call
waits at a busy extension before recalling the extension
that sent the Call Waiting tones)
For Voice-Announced Intercom...