Home > Netgear > Router > Netgear Wndr3700v5 N600 Wifi Router User Manual

Netgear Wndr3700v5 N600 Wifi Router User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Netgear Wndr3700v5 N600 Wifi Router User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 137 Netgear manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Share a USB Printer 81
     N600 WiFi Dual Band Gigabit Router
    Install the Printer Driver and Cable the Printer
    Some USB printer manufacturers (for example, HP and Lexmark) request t\
    hat you do not 
    connect the USB cable until the installation software prompts you to do \
    so.
    To install the driver and cable the printer:
    1. 
    On each computer on your network that shares the USB printer
     , install the driver 
    software for the USB printer.
    If the printer driver is not installed, contact the printer manufacturer\
    .
    2.  Use a USB printer cable to connect the USB printer to the router USB por\
    t.  
    USB
    port
    Download the ReadySHARE Printer Utility
    The utility works on Windows and Mac computers.
    To download the utility:
    1.  V
    isit  www.netgear.com/readyshare .
    2.  Click the  PRINT - Learn how you can print wirelessly from many devices  link.
    3.  Click one of the following links to download the ReadySHARE Printer util\
    ity setup file:
    • Download PC installer and get started. Download the utility for Windows 
    computers.
    • Download Mac installer and get started. Download the utility for MAC computers.
    • Download the genie 
     App and get started. Download the genie app to set up 
    AirPrint with your iOS device.
    4.  Follow the onscreen instructions to install the ReadySHARE Printer utili\
    ty
     . 
    						
    							Share a USB Printer 82
    N600 WiFi Dual Band Gigabit Router 
    Install the ReadySHARE Printer Utility
    You must install the ReadySHARE Printer utility on each computer that wil\
    l share the printer. 
    After you install it, the utility displays as NETGEAR USB Control Center\
     on your computer.
    To install the utility:
    1.  If necessary
     , unzip the ReadySHARE Printer utility setup file.
    2.  Double-click the ReadySHARE Printer utility setup file that you download\
    ed.
    3. Follow the wizard instructions to install NETGEAR USB Control Center.
    After the InstallShield Wizard completes the installation, the NETGEAR U\
    SB Control  Center prompts you to select a language: 
    						
    							Share a USB Printer 83
     N600 WiFi Dual Band Gigabit Router
    4. 
    Select a language from the menu and click the  OK button.
    The USB printer connected to the router displays in the NETGEAR USB Cont\
    rol Center 
    window.
    Note: Some firewall software, such as Comodo or Norton, blocks 
    NETGEAR USB Control Center from accessing the USB printer. If you 
    do not see the USB printer displayed in the utility, you can disable the 
    firewall temporarily to allow the utility to work. 
    						
    							Share a USB Printer 84
    N600 WiFi Dual Band Gigabit Router 
    Print Using the NETGEAR USB Control Center
    For each computer, after you click the Connect and Disconnect buttons once, the utility 
    automatically manages the printing queue and handling. By default, the u\
    tility starts 
    automatically whenever you log on to Windows and runs in the background.\
    For more information about the features available in the NETGEAR USB Con\
    trol Center, see 
    the ReadySHARE Printer User Manual, which is available 
    http://downloadcenter.netgear.com .
    To print a document using the NETGEAR USB Control Center:
    1. Click the NETGEAR USB Control Center icon 
    .
    2. Select a printer and click the  Connect button.
    The printer status changes to Manually connected by Mycomputer . Now only the 
    computer you are using can use this printer
     .
    3.  Use the print feature in your application to print your document.
    The NETGEAR USB Control Center automatically connects your computer to t\
    he USB  printer and prints the document. If another computer is already connecte\
    d to the printer
     , 
    your print job goes into a queue to wait to be printed.
    4.  If your document does not print, use the NETGEAR USB Control Center to c\
    heck the printer 
    status. 
    5.  T
    o release the printer so that all computers on the network can use it, c\
    lick the  Disconnect 
    button.
    The status changes to Available. Now any computers on the network can use the printer.
    6.  T
    o exit the utility, select System > Exit. 
    						
    							Share a USB Printer 85
     N600 WiFi Dual Band Gigabit Router
    Print Using the NETGEAR USB Control Center
    For each computer, after you click the 
    Connect and Disconnect buttons once, the utility 
    automatically manages the printing queue and handling. By default, the u\
    tility starts 
    automatically whenever you log on to Windows and runs in the background.\
    To print a document using the NETGEAR USB Control Center:
    1.  Click the NETGEAR USB Control Center icon 
    .
    2. Select a printer and click the  Connect button.
    The printer status changes to Manually connected by Mycomputer . Now only the 
    computer you are using can use this printer
     .
    3.  Use the print feature in your application to print your document.
    The NETGEAR USB Control Center automatically connects your computer to t\
    he USB  printer and prints the document. If another computer is already connecte\
    d to the printer
     , 
    your print job goes into a queue to wait to be printed.
    4.  If your document does not print, use the NETGEAR USB Control Center to c\
    heck the printer 
    status. See  View or Change the Status of a Printer  on page  86.
    5.  T
    o release the printer so that all computers on the network can use it, c\
    lick the  Disconnect 
    button.
    The status changes to Available. Now any computers on the network can use the printer.
    6.  T
    o exit the utility, select System > Exit . 
    						
    							Share a USB Printer 86
    N600 WiFi Dual Band Gigabit Router 
    View or Change the Status of a Printer
    To view or change the status:
    1. 
    Click the NETGEAR USB Control Center icon 
    .
    The Status column shows the status for each device:
    • A
    vailable. No print jobs are in progress. You can use the USB printer from any 
    computer in the network. 
    • Connected. 
     Your computer is connected to the printer and will be released when 
    your print job is done.
    • Manually Connected by . Only the connected computer can use the printer
     . 
    • W
    aiting to Connect . Your computer is not connected to the shared printer yet. 
    2.  T
    o print from your computer when the printer status shows Manually connec\
    ted by  another 
    computer , do the following:
    a. Click the Connect button on your computer
     .
    On the other user’s computer, a message displays that another user wants to connect 
    to the printer
     .
    b. On the other user’s computer, click the  Accept button. 
    						
    							Share a USB Printer 87
     N600 WiFi Dual Band Gigabit Router
    The printer is released from the connection and the printer status on yo\
    ur computer 
    changes to Available.
    3.  T
    o print from your computer when the status shows Waiting to Connect, do the following:
    a.Click the  Connect button.
    The printer status changes to Manually connected by Mycomputer . Now only your 
    computer can use the printer
     .
    b.  T
    o allow the printer to be shared, click the  Disconnect button.
    The printer is released from the connection and the status changes to Available.
    Use the Scan Feature of a Multifunction USB Printer
    If your USB printer supports scanning, you can also use the USB printer \
    for scanning. 
    To use the scan feature of a multifunction USB printer:
    1.  Click the NETGEAR USB Control Center icon 
    .
    2. Make sure that the printer status shows as Available.
    3.  C
    lick the Network Scanner  button.
    4.  If a Select a Device window displays, select the scanner and click the  OK button.
    The scanner widow displays so that you can use the USB printer for scann\
    ing.
    Change NETGEAR USB Control Center Settings
    You can stop the NETGEAR USB Control Center from starting automatically w\
    hen you log in  to Windows. You can also change the language and specify the time-out to release the \
    printer connection. 
    						
    							Share a USB Printer 88
    N600 WiFi Dual Band Gigabit Router 
    Turn Off Automatic Startup for NETGEAR USB Control Center
    You can stop the NETGEAR USB Control Center from starting automatically w\
    hen you log in 
    to Windows. 
    To turn off automatic NETGEAR USB Control Center startup:
    1.  Click the NETGEAR USB Control Center icon 
    .
    2. Select  Tools > Configuration.
    The Control Center - Configuration window displays.
    3.  Clear the  Automatically execute when logging on W
     indows check box.
    4.  Click the  OK button.
    Your settings are saved. 
    						
    							Share a USB Printer 89
     N600 WiFi Dual Band Gigabit Router
    Change the Language in NETGEAR USB Control Center
    To change the language:
    1. 
    Click the NETGEAR USB Control Center icon 
    .
    2. Select  Tools > Configuration .
    The Control Center - Configuration window displays.
    3.  In the Language menu, select a language.
    4.  Click the  OK button.
    The next time NETGEAR USB Control Center starts, the language changes.
    Specify the Time-Out for NETGEAR USB Control Center
    Specify the time-out to release the printer connection. 
    						
    							Share a USB Printer 90
    N600 WiFi Dual Band Gigabit Router 
    To specify the time-out:
    1. 
    Click the NETGEAR USB Control Center icon 
    .
    2. Select  Tools > Configuration.
    The Control Center - Configuration window displays.
    3.  In the T
    imeout field, type the number of minutes.
    The time-out is the number of minutes that a computer holds its connecti\
    on to the printer when the connection isn’t being used.
    4.  Click the  OK button.
    Your settings are saved. 
    						
    All Netgear manuals Comments (0)

    Related Manuals for Netgear Wndr3700v5 N600 Wifi Router User Manual