Netgear Wndr3700v5 N600 Wifi Router User Manual
Have a look at the manual Netgear Wndr3700v5 N600 Wifi Router User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 137 Netgear manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Optimize Performance 41 N600 WiFi Dual Band Gigabit Router 5. Select the Turn Internet Access QoS On check box. 6. Select the Turn Bandwidth Control On check box. 7. Specify the bandwidth setting: • If you know the bandwidth of your Internet connection, type it in the Uplink bandwidth Maximum field. • If you are not sure, select the Automatically check Internet Uplink bandwidth radio button and click the Check button. Speedtest checks your uplink bandwidth and the Uplink bandwidth Maximum field adjusts. 8. Click the Apply button. The router assigns a high priority to video streaming from the Internet \ traffic. Add QoS Rules by Service To add a QoS rule for a service: 1. Launch a web browser from a computer or wireless device that is connecte\ d to the network. 2. In the address field of the web browser , enter http://www.routerlogin.net or http://www.routerlogin.com . A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive.
Optimize Performance 42 N600 WiFi Dual Band Gigabit Router The BASIC Home screen displays. 4. Select ADV ANCED > Setup > QoS Setup. The QoS Setup screen displays. 5. Select the Turn Internet Access QoS On check box. 6. Select the Add Rules QoS by Service radio button. The screen adjusts. 7. In the Applications menu, select an application or service. 8. In the Priority menu, select the priority for the rule. The priority selections correspond to the queues in the QoS rules table.\ 9. Click the Add button. The service displays in the QoS rules table. 10. Click the Apply button. Your settings are saved. Add a QoS Rule by Device To add a QoS rule for a device: 1. Launch a web browser from a computer or wireless device that is connecte\ d to the network. 2. In the address field of the web browser , http://www.routerlogin.net or http://www.routerlogin.com .
Optimize Performance 43 N600 WiFi Dual Band Gigabit Router A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADV ANCED > Setup > QoS Setup . The QoS Setup screen displays. 5. Select the T urn Internet Access QoS On check box. 6. Select the Add Rules QoS by Device radio button. Computers and devices that are connected to the network display in the M\ AC device list. By default, each device is assigned a normal priority. 7. Select or specify the device: • T o select a device in the MAC Device list, select its radio button. •T o specify a device that is not in the MAC device list, complete the QoS Policy for , MAC Address, and Device Name fields and click the Add button. The device is listed in a queue in the QoS rules table with its default \ rule priority. The rule priority corresponds to the queues. Note: T o specify a device rule’s priority, edit the rule. For more information, see Edit a QoS Rule on page 44. 8. Click the Apply button.
Optimize Performance 44 N600 WiFi Dual Band Gigabit Router Your settings are saved. Edit a QoS Rule To edit a QoS rule: 1. Launch a web browser from a computer or wireless device that is connecte\ d to the network. 2. In the address field of the web browser , enter http://www.routerlogin.net or http://www.routerlogin.com . A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password . The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADV ANCED > Setup > QoS Setup. The QoS Setup screen displays. 5. Select the QoS by Service radio button. 6. In the QoS rules table, click the application or service to select it. 7. Click the Edit button. 8. In the Priority menu, select a priority level. 9. Click the Apply button. The rule’s priority is updated in the QoS rules table on the QoS Setup screen. Delete a QoS Rule To delete a QoS rule: 1. Launch a web browser from a computer or wireless device that is connecte\ d to the network. 2. In the address field of the web browser , enter http://www.routerlogin.net or http://www.routerlogin.com . A login screen displays. 3. Enter the router user name and password.
Optimize Performance 45 N600 WiFi Dual Band Gigabit Router The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Setup > QoS Setup. The QoS Setup screen displays. 5. Select the QoS by Service radio button. 6. In the QoS rules table, click the application or service to select it. 7. Click the Delete button. The rule is deleted. Delete All QoS Rules To delete all QoS rules: 1. Launch a web browser from a computer or wireless device that is connected to the network. 2. In the address field of the web browser, enter http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Setup > QoS Setup. The QoS Setup screen displays. 5. Select the QoS by Service radio button. 6. Click the Delete All button. The rules are deleted. Improve Network Connections with Universal Plug and Play Universal Plug and Play (UPnP) helps devices such as Internet appliances and computers access the network and connect to other devices as needed. UPnP devices can automatically discover the services from other registered UPnP devices on the network. If you use applications such as multiplayer gaming, peer-to-peer connections, or real-time communications such as instant messaging or remote assistance (a feature in Windows XP), enable UPnP.
Optimize Performance 46 N600 WiFi Dual Band Gigabit Router To enable Universal Plug and Play: 1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Advanced Setup > UPnP. The UPnP screen displays. 5. Select the Turn UPnP On check box. By default, this check box is selected. If the Turn UPnP On check box is cleared, the router does not allow any device to automatically control router resources, such as port forwarding. 6. Type the advertisement period in minutes. The advertisement period specifies how often the router broadcasts its UPnP information. This value can range from 1 to 1440 minutes. The default period is 30 minutes. Shorter durations ensure that control points receive current device status at the expense of more network traffic. Longer durations can compromise the freshness of the device status but can significantly reduce network traffic. 7. Type the advertisement time to live in hops. The time to live for the advertisement is measured in hops (steps) for each UPnP packet sent. Hops are the steps a packet takes between routers. The number of hops can range from 1 to 255. The default value for the advertisement time to live is 4 hops, which should be fine for most home networks. If you notice that some devices are not being updated or reached correctly, it might be necessary to increase this value. 8. Click the Apply button. The UPnP Portmap Table displays the IP address of each UPnP device that is accessing the router and which ports (internal and external) that device opened. The UPnP Portmap Table also displays what type of port is open and whether that port is still active for each IP address. To refresh the information in the UPnP Portmap Table, click the Refresh button.
Optimize Performance 47 N600 WiFi Dual Band Gigabit Router Wi-Fi Multimedia Quality of Service Wi-Fi Multimedia Quality of Service (WMM QoS) prioritizes wireless voice and video traffic over the WiFi link. WMM QoS is automatically enabled for the router. WMM QoS prioritizes wireless data packets from different applications based on four access categories: voice, video, best effort, and background. For an application to receive the benefits of WMM QoS, WMM must be enabled for both it and the client running that application. Legacy applications that do not support WMM and applications that do not require QoS are assigned to the best effort category, which receives a lower priority than voice and video. To disable WMM QoS: 1. Launch an Internet browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Setup > QoS Setup. The QoS screen displays. 5. Clear the Enable WMM (Wi-Fi multimedia) settings (2.4 GHz b/g/n) check box. 6. Clear the Enable WMM (Wi-Fi multimedia) settings (5 GHz b/g/n) check box. 7. Click the Apply button. Your changes are saved.
48 5 5. Control Access to the Internet The router comes with a built-in firewall that helps protect your home network from unwanted intrusions from the Internet. This chapter includes the following sections: •Set Up Parental Controls •Allow or Block Access to Your Network •Use Keywords to Block Internet Sites •Block Services from the Internet •Schedule When to Block Internet Sites and Services •Avoid Blocking on a Trusted Computer •Set Up Security Event Email Notifications
Control Access to the Internet 49 N600 WiFi Dual Band Gigabit Router Set Up Parental Controls The first time that you select Parental Controls from the BASIC Home pag\ e, your browser goes to the Parental Controls website.You can learn more about Parental Controls or download the application. After you set up and enabled parental controls, you can change the web f\ iltering level for each device on the network through the network map page on the genie app\ . To set up Parental Controls: 1. Launch a web browser from a computer or WiFi device that is connected to\ the network. 2. Enter http://www .routerlogin.net. A login window displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select Parental Controls. The Parental Controls website opens. 5. Click the button for the app or version that you want to download and us\ e. 6. Follow the onscreen instructions to download and install the genie app. 7. Open the genie app and select Parental Controls. After installation, Live Parental Controls automatically starts. 8. Click the Next button, read the note, and click the Next button again to proceed.
Control Access to the Internet 50 N600 WiFi Dual Band Gigabit Router Because Live Parental Controls uses free OpenDNS accounts, you are promp\ ted to log in or create a free account. 9. Select the radio button that applies to you: • If you already have an OpenDNS account, leave the Ye s radio button selected. • If you do not have an OpenDNS account, select the No radio button. If you are creating an account, the Create a free OpenDNS account page d\ isplays. Do the following: a. Complete the fields. b. Click the Next button. After you log on or create your account, the filtering level page displa\ ys. 10. Select a radio button for a filtering level and click the Next button. The Setup is complete. 11. Click the T ake me to the status page button. The Status page displays. Parental Controls are now set up for the route\ r. 12. T o enable Parental Controls, click the Enable Live Parental Controls button to enable it. Allow or Block Access to Your Network You can use access control to block or allow access to your network. To set up access control: 1. Launch a web browser from a computer or wireless device that is connecte\ d to the network. 2. T ype http://www.routerlogin.net or http://www.routerlogin.com . A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password . The user name and password are case-sensitive. The BASIC Home screen displays.