Netgear Wndr3700v5 N600 Wifi Router User Manual

							Network Settings 
111  N600 WiFi Dual Band Gigabit Router
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Setup > WAN Setup.
The WAN Setup screen displays.
5. Select the Default DMZ Server check box.
6. Type the IP address.
7. Click the Apply button.
Your change takes effect.
Change the Router’s Device Name
The router’s device name is WNDR3700v5. This device name displays in the file manager 
when you browse your network.
To change the router’s device name:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup screen displays.
5. In the Device Name field, type a new name.
6. Click the Apply button.
Your change is saved. 
						

							Network Settings 112
N600 WiFi Dual Band Gigabit Router 
Change the LAN TCP/IP Settings
The router is preconfigured to use private IP addresses on the LAN side \
and to act as a 
DHCP server. The router’s default LAN IP configuration is as follows:
• LAN IP address. 192.168.1.1
• Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use\
 in private networks  and are suitable for most applications. If your network requires a dif
 ferent IP addressing 
scheme, you can change these settings.
You might want to change these settings if you need a specific IP subnet \
that one or more  devices on the network use, or if you use competing subnets with the sam\
e IP scheme.
To change the LAN TCP/IP settings:
1.  Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Select  ADV
 ANCED > Setup > LAN Setup .
5. In the IP Address field, type the IP address.
6.  In the IP Subnet Mask , type the subnet mask of the router. 
The IP address and subnet mask identify which addresses are local to a s\
pecific device  and which must be reached through a gateway or router. 
						

							Network Settings 
113  N600 WiFi Dual Band Gigabit Router
7. Change the RIP settings.
Router Information Protocol (RIP) allows a router to exchange routing information with 
other routers. 
a.Select a RIP direction:
•Both. The router broadcasts its routing table periodically and incorporates 
information that it receives.
•Out Only. The router broadcasts its routing table periodically. 
•In Only. The router incorporates the RIP information that it receives.
b. Select a RIP version:
•Disabled. This is the default setting. 
•RIP-1. This format is universally supported. It is adequate for most networks, 
unless you are using an unusual network setup. 
•RIP-2. This format carries more information. Both RIP-2B and RIP-2M send the 
routing data in RIP-2 format. RIP-2B uses subnet broadcasting. RIP-2M uses 
multicasting.
8. Click the Apply button.
Your changes are saved.
If you changed the LAN IP address of the router, you are disconnected when this change 
takes effect.
9. To reconnect, close your browser, relaunch it, and log in to the router.
Specify the IP Addresses That the Router Assigns
By default, the router acts as a Dynamic Host Configuration Protocol (DHCP) server. The 
router assigns IP, DNS server, and default gateway addresses to all computers connected to 
the LAN. The assigned default gateway address is the LAN address of the router. 
These addresses must be part of the same IP address subnet as the router’s LAN IP 
address. Using the default addressing scheme, define a range between 192.168.1.2 and 
192.168.1.254, although you can save part of the range for devices with fixed addresses.
To specify the pool of IP addresses that the router assigns:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays. 
						

							Network Settings 114
N600 WiFi Dual Band Gigabit Router 
4. 
Select  ADVANCED > Setup > LAN Setup .
5. Make sure that the Use Router as DHCP Server  check box is selected.
6.  Specify the range of IP addresses that the router assigns:
a. In the Starting IP 
 Address field, type the lowest number in the range.
This IP address must be in the same subnet as the router.
b.  In the Ending IP 
 Address field, type the number at the end of the range of IP 
addresses.
This IP address must be in the same subnet as the router.
7.  Click the  Apply button.
Your settings are saved.
The router delivers the following parameters to any LAN device that requ\
ests DHCP: • An IP address from the range that you define
• Subnet mask
• Gateway IP address (the router’
 s LAN IP address)
• DNS server IP address (the router’
 s LAN IP address)
Disable the DHCP Server Feature in the Router
By default, the router acts as a DHCP server. The router assigns IP, DNS server, and default 
gateway addresses to all computers connected to the LAN. The assigned default gateway 
address is the LAN address of the router.
You can use another device on your network as the DHCP server or specify \
the network  settings of all your computers. 
						

							Network Settings 
115  N600 WiFi Dual Band Gigabit Router
To disable the DHCP server feature in the router:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup screen displays.
5. Clear the Use Router as DHCP Server check box.
6. Click the Apply button.
7. (Optional) If this service is disabled and no other DHCP server is on your network, set your 
computer IP addresses manually so that the computers can access the router.
Manage Reserved LAN IP Addresses
When you specify a reserved IP address for a computer on the LAN, that computer always 
receives the same IP address each time it accesses the router’s DHCP server. Assign 
reserved IP addresses to computers or servers that require permanent IP settings. 
Reserve an IP Address
To reserve an IP address: 
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup screen displays.
5. In the Address Reservation section, click the Add button. 
6. In the IP Address field, type the IP address to assign to the computer or server.  
						

							Network Settings 
116 N600 WiFi Dual Band Gigabit Router 
Choose an IP address from the router’s LAN subnet, such as 192.168.1.x. 
7. Type the MAC address of the computer or server.
Tip:If the computer is already on your network, you can copy its MAC 
address from the Attached Devices screen and paste it here.
8. Click the Apply button.
The reserved address is entered into the table. 
The reserved address is not assigned until the next time the computer contacts the router’s 
DHCP server. Reboot the computer, or access its IP configuration and force a DHCP release 
and renew.
Edit a Reserved IP Address
To edit a reserved address entry:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup screen displays.
5. Select the radio button next to the reserved address. 
6. Click the Edit button.
The Edit screen displays.
7. Change the settings.
8. Click the Apply button.
Your changes are saved.
Delete a Reserved IP Address Entry
To delete a reserved address entry:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com. 
						

							Network Settings 
117  N600 WiFi Dual Band Gigabit Router
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup screen displays.
5. Select the radio button next to the reserved address. 
6. Click the Delete button.
The address is removed.
Use the WPS Wizard for WiFi Connections
The WPS Wizard helps you add a wireless computer or device to your WiFi network without 
typing the WiFi password.
To use the WPS Wizard:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > WPS Wizard.
A note explaining WPS displays.
5. Click the Next button. 
6. Select a setup method: 
•Push button. Click the WPS button on this screen. 
•PIN Number. The screen adjusts. Enter the client security PIN and click the Next 
button.
7. Within two minutes, go to the client device and use its WPS software to connect to the WiFi 
network.
The WPS process automatically sets up your wireless computer with the network 
password when it connects. The router WPS screen displays a confirmation message.  
						

							Network Settings 
118 N600 WiFi Dual Band Gigabit Router 
Specify Basic WiFi Settings
The router comes with preset security. This means that the WiFi network name (SSID), 
network key (password), and security option (encryption protocol) are preset in the factory. 
You can find the preset SSID and password on the router label. 
Note:The preset SSID and password are uniquely generated for every 
device to protect and maximize your wireless security.
NETGEAR recommends that you do not change your preset security settings. If you change 
your preset security settings, make a note of the new settings and store it in a safe place 
where you can easily find it.
If you use a wireless computer to change the SSID or other wireless security settings, you 
are disconnected when you click the Apply button. To avoid this problem, use a computer 
with a wired connection to access the router.
To specify basic wireless settings:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays. 
						

							Network Settings 119
 N600 WiFi Dual Band Gigabit Router
4. 
Select  Wireless.
You can specify the settings for the 2.4 GHz band and for the 5 GHz band.\
5.  In the Region menu, select your region. 
In some locations, you cannot change this setting.
6.  T
o control the SSID broadcast, select or clear the  Enable SSID Broadcast check box.
When this check box is selected, the router broadcasts its network name \
(SSID) so that it 
displays when you scan for local WiFi networks on your computer or wirel\
ess device.
7.  Leave the  Enable 20/40 MHz Coexistence  check box selected.
8.  T
o change the network name (SSID), type a new name in the  Name (SSID) field.
The name can be up to 32 characters long and it is case-sensitive. The default SSID is 
randomly generated and is on the router
 ’s label. If you change the name, make sure to 
write down the new name and keep it in a safe place.
9.  T
o change the wireless channel, select a number in the  Channel menu.
In some regions, not all channels are available. Do not change the chann\
el unless you 
experience interference (shown by lost connections or slow data transfe\
rs). If this 
happens, experiment with dif

ferent channels to see which is the best. 
When you use multiple access points, it is better if adjacent access poi\
nts use different 
channels to reduce interference. 
 The recommended channel spacing between adjacent 
access points is four channels (for example, use Channels 1 and 5, or 6\
 and 10).
10.  Click the  Apply button.
Your settings are saved. 
						

							Network Settings 
120 N600 WiFi Dual Band Gigabit Router 
If you connected wirelessly to the network and you changed the SSID, you are 
disconnected from the network.
11. Make sure that you can connect wirelessly to the network with its new settings. 
If you cannot connect wirelessly, check the following:
•Is your computer or wireless device connected to another wireless network in your 
area? Some wireless devices automatically connect to the first open network without 
wireless security that they discover.
•Is your computer or wireless device trying to connect to your network with its old 
settings (before you changed the settings)? If so, update the wireless network 
selection in your computer or wireless device to match the current settings for your 
network.
Change the WiFi Mbps Settings
The data rate for high-speed transmissions is commonly measured in megabits per second 
(Mbps).
To change the WiFi Mbps settings:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.