NEC Neax 2400 Ipx System Operations And Maintenance Manual
Here you can view all the pages of manual NEC Neax 2400 Ipx System Operations And Maintenance Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 261
NDA-24307 CHAPTER 3 Page 233 Issue 1 SYSTEM MESSAGES ➂ Day/Night Mode Specification ➃ External Switch Status b7 b6 b5 b4 b3 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0 b0-b3: Mode after changing (Refer to table below) b4-b7: Mode before changing (Refer to table below) Note: This data is programmed as initial data. b0b1b2b3 MEANING b4b5b6b7 0000Day Mode 0 0 0 1 Night Mode 1 0 0 1 0 Night Mode 2 (available only for Japan) 0011Night Mode 3 (DIT-Night Connection Fixed) Note b0-b7: 01=Not used 02=Day/Night Change...
Page 262
CHAPTER 3 NDA-24307 Page 234 Issue 1 SYSTEM MESSAGES This message displays when the MB switch on the IOC card has turned ON when extracting or inserting a circuit card. ➀ Circuit Card No. 1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b0 Default Alarm: NON17-OIOC MB Key Turn ONDefault Grade: 3Grade Modified: Lamp Modified: b0: 0/1 = IOC 0/IOC 1
Page 263
NDA-24307 CHAPTER 3 Page 235 Issue 1 SYSTEM MESSAGES This message displays when the MB switch on the IOC card has turned OFF. ➀ Circuit Card No. 1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b0 Default Alarm: NON17-PIOC MB Key Turn OFFDefault Grade: 3Grade Modified: Lamp Modified: b0: 0/1 = IOC 0/IOC 1
Page 264
CHAPTER 3 NDA-24307 Page 236 Issue 1 SYSTEM MESSAGES This message displays when the MBR switch on the IOC card has turned ON at the time of CPU changeover or speech path changeover. ➀ Circuit Card No. 1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b0 Default Alarm: NON17-QIOC MBR Key Turn ONDefault Grade: 3Grade Modified: Lamp Modified: b0: 0/1...
Page 265
NDA-24307 CHAPTER 3 Page 237 Issue 1 SYSTEM MESSAGES This message displays when the MBR switch on the IOC card has turned OFF at the time of CPU changeover or speech path changeover. ➀ Circuit Card No. 1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b0 Default Alarm: NON17-RIOC MBR Key Turn OFFDefault Grade: 3Grade Modified: Lamp Modified: b0:...
Page 266
CHAPTER 3 NDA-24307 Page 238 Issue 1 SYSTEM MESSAGES This message displays when the MBR switch on the IOGT (PH-GT10) card in ISW is turned ON. ➀ IOGT card system status ➁ IOGT card system status after key operation Note 1:If the MBR key on the active IOGT card is flipped, the ACT/STBY of Speech Path Systems within the whole system is totally changed over. For more details, refer to Chapter 6, Chapter 12. Note 2:“1” is always displayed in the bit data. 1: XXXX XX00 0000 0000 2: 0000 0000 0000 0000 3:...
Page 267
NDA-24307 CHAPTER 3 Page 239 Issue 1 SYSTEM MESSAGES This message displays when the MBR switch on the IOGT (PH-GT10) card in ISW is turned OFF. ➀ IOGT card system status ➁ IOGT card system status after key operation Note:If failure occurs on the HSW card side, the IOGT card is placed in Make-Busy state and “1” is displayed in the bit. Otherwise, “0” is displayed. 1: XXXX XX00 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ ➁ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000...
Page 268
CHAPTER 3 NDA-24307 Page 240 Issue 1 SYSTEM MESSAGES This message displays when the Primary Dch fails, Dch Back-Up function is operated automatically. ➀ Condition of the Dch ➁ Location of the Dch (Primary) ➂ Location of the Dch (Back-up) 1: XXXX XXXX XXXX 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ ➁ ➂ ➃ ➄ ➅ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b7 b6 b5 b4 b3 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0 b7...
Page 269
NDA-24307 CHAPTER 3 Page 241 Issue 1 SYSTEM MESSAGES ➃ Changeover Information ➄ Status of the Primary/Back-up Dch ➅ EVENT No.b3 b2 b1 b0 b5 b4 b3 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0 b0, b1: 00 = Change from Primary Dch to Dch for Back-up 01 = Change from Dch for Back-up to Primary Dch 10 = Place Primary Dch to ACT status 11 = Place Dch for Back-up to ACT status b2, b3: 00 = Change signal is received 01 = Change signal is sent b0-b2: Status of Primary Dch 0 = In service (ACT status) 1 = STBY 2 = Out of...
Page 270
CHAPTER 3 NDA-24307 Page 242 Issue 1 SYSTEM MESSAGES This message displays when the Primary Dch fails, and the Dch Back-Up function is operated manually. ➀ Condition of the Dch ➁ Location of the Dch (Primary) ➂ Location of the Dch (Back-up) 1: XXXX XXXX XXXX 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ ➁ ➂ ➃ ➄ ➅ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b7 b6 b5 b4 b3 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0...