NEC Neax 2400 Ipx System Operations And Maintenance Manual
Here you can view all the pages of manual NEC Neax 2400 Ipx System Operations And Maintenance Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 151
NDA-24307 CHAPTER 3 Page 123 Issue 1 SYSTEM MESSAGES Note 4: When“➁ (ACD Trouble Kind)” is 24 or 99 Hex: ➂ ~ ➅ Not used ➆, ➇Error Counter Note 5:When“➁ (ACD Trouble Kind)” is 30 Hex: ➂ ~ ➅ Pointer Address ➆Not used ➇Error Kind Note 6:When“➁ (ACD Trouble Kind)” is 33 Hex: ➂ ACDP Data Memory 00 = Used 01 = Not used ➃ACDP System Capacity 02 = 50 Agent Positions 04 = 200 Agent Positions 07 = 500 Agent Positions 12 = 900 Agent Positions 15 = 2,000 Agent Positions Note:If other data is output, the ACD system...
Page 152
CHAPTER 3 NDA-24307 Page 124 Issue 1 SYSTEM MESSAGES This message displays to indicate the result of a designated connection test (Individual Trunk Access) from a station. ➀Test Item (b0-b3 is valid only for Outgoing trunk test) 1: XXXX XXXX XXXX XXXX 2: XXXX 00XX XXXX XXXX 3: XXXX XXXX XXXX XX00 ➀ ➁ ➂ ➃ ➄ ➅ ➆ ➇➈ ➉11 12 12 12 12 12 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b7 b6 b5 b4 b3 b2 b1 b0 Default...
Page 153
NDA-24307 CHAPTER 3 Page 125 Issue 1 SYSTEM MESSAGES ➁ ➂ ~ ➄ Station number of testing station (see table) ➅ Te n a n t N o . b7 b6 b5 b4 b3 b2 b1 b0 b7 b3 b2 b1 b0 b0-b3: Number of digits of testing station No. b4-b7: Error Numbers (see table below) Error Numbers and Their Meanings ERROR NO. MEANING 0--- 1 Testing station is restricted from activating the service. 2 Route Number Error of the designated trunk 3 Trunk Number Error of the designated trunk 4 Trunk busy 5 Sender busy 6 SMDR failure 7...
Page 154
CHAPTER 3 NDA-24307 Page 126 Issue 1 SYSTEM MESSAGES ➆ Tenant No. ➇ Tested Route No. Note:When Logical Routes are assigned, Logical Route Numbers are displayed here. ➈ OPRT data Note:When Logical Routes are assigned, Logical Route Numbers are displayed here. ➉ (This data is not for Ringing Signal Test) Digit of Dialed Number (for test) Dialed Number (for test) (a) Dialed Number sent by the test Trunk/Senderb3 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0 b7 b4 b3 b2 b1 b0 b7 b6 b5 b4 b3 b2...
Page 155
NDA-24307 CHAPTER 3 Page 127 Issue 1 SYSTEM MESSAGES This message displays when a call terminates to the Emergency Telephone. ➀ ~ ➅ Called Station (Emergency Telephone) No. (ASCII Code) ➆ ~ Calling Station No. (ASCII Code) 1: XXXX XXXX XXXX XXXX 2: XXXX XXXX 0000 0000 3: 0000 0000 0000 0000 ➀ ➁ ➂ ➃ ➄ ➅ ➆ ➇➈ ➉ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b7 b6 b5 b4 b3 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0 Default...
Page 156
CHAPTER 3 NDA-24307 Page 128 Issue 1 SYSTEM MESSAGES This message displays when the LCR-Attendant Manual Override is set at the Attendant/Desk Console. ➀ Route Selection Time Pattern No. assigned at Attendant/Desk Console Note:Route Selection Time Pattern 0-7 corresponds to TDPTN No. 0-7 in the AOPR command. 1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000...
Page 157
NDA-24307 CHAPTER 3 Page 129 Issue 1 SYSTEM MESSAGES This message displays when the LCR-Attendant Manual Override is cancelled at the Attendant/Desk Console. ➀ Suspension of Emergency Control Note:Route Selection Patterns 0-7 corresponds to TDPTN No. 0-7 in the AOPR command. 1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b0 Default Alarm:...
Page 158
CHAPTER 3 NDA-24307 Page 130 Issue 1 SYSTEM MESSAGES This message displays when the system detects abnormal duration in the line connection between the calling and called party. When the calling and called party establish a line connection and continue the hook-up for an extremely short or long period of time (predetermined by the ASYD command (SYS1, INDEX45, 46)), this message is created. ➀ Calling party information ➁ Tenant No. of Calling/Called party (Hex.) ➂ Calling party Information When calling...
Page 159
NDA-24307 CHAPTER 3 Page 131 Issue 1 SYSTEM MESSAGES When calling party is ATTCON/DESKCON Attendant/Desk console No. (See table.) When calling party is Trunk Route No. and Trunk No. (See table.) Note: Route No. (a) Route No. (b) ➃ Called party information b7 b6 b5 b4 b3 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0 b3 b2 b1 b0 b3 b2 b1 b0 b4- b7b0-b3 DC0 DC1 b0-b7 (a) Route No. (Hex) Note (b) Route No. (Hex) Note (c) Trunk No. (Hex) (d) Trunk No. (Hex) b0-b5: Route No. (1-63) b6: OP 0/1 = Data in OPRT is...
Page 160
CHAPTER 3 NDA-24307 Page 132 Issue 1 SYSTEM MESSAGES ➄ Called Party Information Station to Station Call OG Call to outside IC Call from outside b4-b7 b0-b3 (a) Te n a n t N o . Te n a n t N o . DC0 DC1 DC2 DC3 DC4 DC5(a) Type of called party 00 = Station b7 b6 b5 b4 b3 b2 b1 b0 b0-b7 Route No. (Hex) Route No. (Hex) Trunk No. (Hex) Trunk No. (Hex)b4-b7 b0-b3 Route No. (Hex) Route No. (Hex) Trunk No. (Hex) Trunk No. (Hex) DC0 DC1 DC2 DC3 DC4 DC5 DC6 DC7 DC8 DC9 DC10 DC11 DC12 DC13 DC14 DC15 DC16 DC17...