NEC Neax 2400 Ipx System Operations And Maintenance Manual
Here you can view all the pages of manual NEC Neax 2400 Ipx System Operations And Maintenance Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 131
![Page 131
NDA-24307 CHAPTER 3
Page 103
Issue 1
SYSTEM MESSAGES
This message displays when the DTI card detects abnormal state of a digital line but this failure has influence
on the Speech path. When the status is getting worse, they system will issue [3-I] Digital Line Failure.
➀ Faulty PM (LENS) Location
➁ Kind of Fault
➂Fault Detection Time Slot No.
(This data is valid only when the
kind of fault is 08H)
1: XXXX XX00 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁
➂
4: 0000 0000 0000 0000 5: 0000...](http://img.usermanuals.tech/thumb/54/84234/w300_nec-ipx-system-op-and-maint-ipx-u-type_d-130.png "Page 131
NDA-24307 CHAPTER 3
Page 103
Issue 1
SYSTEM MESSAGES
This message displays when the DTI card detects abnormal state of a digital line but this failure has influence
on the Speech path. When the status is getting worse, they system will issue [3-I] Digital Line Failure.
➀ Faulty PM (LENS) Location
➁ Kind of Fault
➂Fault Detection Time Slot No.
(This data is valid only when the
kind of fault is 08H)
1: XXXX XX00 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁
➂
4: 0000 0000 0000 0000 5: 0000...")
NDA-24307 CHAPTER 3 Page 103 Issue 1 SYSTEM MESSAGES This message displays when the DTI card detects abnormal state of a digital line but this failure has influence on the Speech path. When the status is getting worse, they system will issue [3-I] Digital Line Failure. ➀ Faulty PM (LENS) Location ➁ Kind of Fault ➂Fault Detection Time Slot No. (This data is valid only when the kind of fault is 08H) 1: XXXX XX00 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ ➁ ➂ 4: 0000 0000 0000 0000 5: 0000...
Page 132
![Page 132
CHAPTER 3 NDA-24307
Page 104
Issue 1
SYSTEM MESSAGES
This message displays after [3-H] Digital Line Warning lasts in the DTI card over the particular time. This
failure may cause a speech path fault to the DTI card.
➀ Faulty PM Location
➁ Kind of fault
➂Faulty Circuit Card Location (This
data is valid when
➁ is 0FH)
➃ Faulty Circuit Card Location (This
data is valid when
➁ is 0FH)
1: XXXX 0000 XXXX XXXX 2: XXXX XXXX XXXX XXXX 3: XXXX XXXX XXXX XXXX
➀ ➁ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃
4: XXXX...](http://img.usermanuals.tech/thumb/54/84234/w300_nec-ipx-system-op-and-maint-ipx-u-type_d-131.png "Page 132
CHAPTER 3 NDA-24307
Page 104
Issue 1
SYSTEM MESSAGES
This message displays after [3-H] Digital Line Warning lasts in the DTI card over the particular time. This
failure may cause a speech path fault to the DTI card.
➀ Faulty PM Location
➁ Kind of fault
➂Faulty Circuit Card Location (This
data is valid when
➁ is 0FH)
➃ Faulty Circuit Card Location (This
data is valid when
➁ is 0FH)
1: XXXX 0000 XXXX XXXX 2: XXXX XXXX XXXX XXXX 3: XXXX XXXX XXXX XXXX
➀ ➁ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃
4: XXXX...")
CHAPTER 3 NDA-24307 Page 104 Issue 1 SYSTEM MESSAGES This message displays after [3-H] Digital Line Warning lasts in the DTI card over the particular time. This failure may cause a speech path fault to the DTI card. ➀ Faulty PM Location ➁ Kind of fault ➂Faulty Circuit Card Location (This data is valid when ➁ is 0FH) ➃ Faulty Circuit Card Location (This data is valid when ➁ is 0FH) 1: XXXX 0000 XXXX XXXX 2: XXXX XXXX XXXX XXXX 3: XXXX XXXX XXXX XXXX ➀ ➁ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ 4: XXXX...
Page 133
NDA-24307 CHAPTER 3 Page 105 Issue 1 SYSTEM MESSAGES This message displays when a digital line fault is restored. ➀ Faulty Line Location 1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b7 b6 b5 b4 b3 b2 b1 b0 Default Alarm: ON3-JDigital Line RestoreDefault Grade: 0Grade Modified: Lamp Modified: b0-b4: Group No. b5, b6: Unit No. (0-3) b7: Module...
Page 134
CHAPTER 3 NDA-24307 Page 106 Issue 1 SYSTEM MESSAGES This message displays when a Ready Failure occurs in both systems as a result of the TSW card having a failure or the card is not mounted properly. ➀Faulty TSW Information See Chapter 5 for repair procedure. 1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b7 b1 b0 Default Alarm: MN4-CBoth TSW...
Page 135
NDA-24307 CHAPTER 3 Page 107 Issue 1 SYSTEM MESSAGES This message displays when a TSW Ready Failure occurs in one of the dual systems because the TSW card fails or the card is not mounted properly. ➀Faulty TSW Information See Chapter 5 for repair procedure. 1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b7 b1 b0 Default Alarm: MN4-DTSW Ready...
Page 136
![Page 136
CHAPTER 3 NDA-24307
Page 108
Issue 1
SYSTEM MESSAGES
This message displays when I/O Ready Failure occurs in both HSW systems.
➀ HSW Fault Detected
Note:When I/O ready failure ocurs simultaneously in both HSW systems, the [4-E] message is separately
issued twice: “0” is displayed in one message and “1” in the other message.
➁ Details on HSW No.
See Chapter 5 for repair procedure.
1: XXXX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000...](http://img.usermanuals.tech/thumb/54/84234/w300_nec-ipx-system-op-and-maint-ipx-u-type_d-135.png "Page 136
CHAPTER 3 NDA-24307
Page 108
Issue 1
SYSTEM MESSAGES
This message displays when I/O Ready Failure occurs in both HSW systems.
➀ HSW Fault Detected
Note:When I/O ready failure ocurs simultaneously in both HSW systems, the [4-E] message is separately
issued twice: “0” is displayed in one message and “1” in the other message.
➁ Details on HSW No.
See Chapter 5 for repair procedure.
1: XXXX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000...")
CHAPTER 3 NDA-24307 Page 108 Issue 1 SYSTEM MESSAGES This message displays when I/O Ready Failure occurs in both HSW systems. ➀ HSW Fault Detected Note:When I/O ready failure ocurs simultaneously in both HSW systems, the [4-E] message is separately issued twice: “0” is displayed in one message and “1” in the other message. ➁ Details on HSW No. See Chapter 5 for repair procedure. 1: XXXX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ ➁ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000...
Page 137
NDA-24307 CHAPTER 3 Page 109 Issue 1 SYSTEM MESSAGES This message displays when I/O Ready Failure occurs in both HSW systems. ➀ HSW Fault Detected ➁ Details on HSW No. See Chapter 5 for repair procedure. 1: XXXX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ ➁ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b0 b4 b0 Default Alarm: MN4-FHSW Ready FailureDefault Grade: 3Grade Modified: Lamp Modified:...
Page 138
CHAPTER 3 NDA-24307 Page 110 Issue 1 SYSTEM MESSAGES This message displays when I/O Ready Failure occurs on a DLKC card. ➀Details on faulty DLKC card 1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b7 b0 Default Alarm: MN4-QDLKC Ready FailureDefault Grade: 3Grade Modified: Lamp Modified: b0: 0/1 = No. 0 system/No. 1 system b7: 0/1 = ACT/STBY
Page 139
NDA-24307 CHAPTER 3 Page 111 Issue 1 SYSTEM MESSAGES This message displays when the MUX (PH-PC36) card has a Ready Failure in one of the dual systems. When the card is not ready for service function because of the failure or because the card is not mounted properly, the system creates this message. ➀Unit and MG number for the faulty MUX card ➁Faulty MUX card information See Chapter 5 for repair procedure. 1: XXXX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ ➁ 4: 0000 0000 0000 0000 5:...
Page 140
CHAPTER 3 NDA-24307 Page 112 Issue 1 SYSTEM MESSAGES This message displays when the MUX (PH-PC36) card has a Ready Failure in both of the dual systems. When the card is not ready for service function because of the failure or because the card is not mounted properly, the system creates this system message. ➀Unit and MG number for the MUX card ➁Faulty MUX card information Note 1:Though this message indicates the Ready Failure in both systems, the information displayed here only relates to the ACT-side...