NEC Neax 2400 Ipx Fusion Network System Manual

CHAPTER 5 NDA-24299
Page 106
Revision 1.0
DATA PROGRAMMING
Assignment of FCH Related Data
Figure 5-48   Connection Route Class Data Sample
CPU PBX
LANIFCH
FCH
FGHDTI
HUBHUB
Speech
Signal
ROUTER
C_RT14
C_RT15
C_RT11
C_RT10
External LAN
Internal LAN
Fusion Network
Nailed-down 
         Connection
Note 2
FGHFCCH Speech
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16FGHTF
TCL
RLP
SMDR
LSG
PAD
TRKS
TC/EC
FINT
FPEG
TC
MTC
STSEQ
MMN
LKIND3
4
2
0
12
0(1)
0
0
0
0
2 03
4
2
0
13
0
0
0
03
4
2
0
13
0
0
0
0
0
0
0 0
0FCCH
3
4...

NDA-24299 CHAPTER 5
Page 107
Revision 1.0
DATA PROGRAMMING
Assignment of FCH Related Data
STEP 2: ACTK
Assign the connection trunk data of DTI, FCH, and FGH cards, using the ACTK command. When
assigning FCH, FGH trunk data, eight trunks must be set. A sample data assignment of FCH, FGH
card is as follows.
Figure 5-49   Sample Data Assignment (ACTK)
STEP 3: MBCT
Unbusy the connection trunk data assigned in the previous steps, by using the MBCT command. This
is required for FCH, FGH trunks as well as...

CHAPTER 5 NDA-24299
Page 108
Revision 1.0
DATA PROGRAMMING
Assignment of FCH Related Data
STEP 4: ASYD
Assign the system data for nailed-down connection between FCH and FGH cards.
SYS1, Index60, b4=1 (Nailed-down connection: In service)
STEP 5: AFCD
Assign the detailed data related to nailed-down connection between FCH and FGH cards.
  
Figure 5-50   Sample Data Assignment (AFCD)
LENS-A
EAD-A
 MG
00-07 U
0-3   G
00-23Lv
0-7
0     3
0     3
0     3
0     3
0     3
0     3
0     3 0     0
0     0
0     0
0...

NDA-24299 CHAPTER 5
Page 109
Revision 1.0
DATA PROGRAMMING
Assignment of FCH Related Data
STEP 6: AFCH
Assign FCH number on an FCH circuit card basis. In the following example, FCHN=1 is assigned
for the FCH circuit card. For the FGH card, FCHN assignment is not necessary.
Figure 5-51   Assignment of FCHN (example)
STEP 7: AGIP
Assign IP addresses of FGH card and its connected router.
LENS (Line Equipment Number): Assign the LENS data of FGH card.
KIND (Kind of Selection): Select “FGH”.
FGH_IP (FGH IP...

CHAPTER 5 NDA-24299
Page 110
Revision 1.0
DATA PROGRAMMING
Assignment of FCH Related Data
CSLINK_NUM (Client /Server Connection Max. Number): Assign “16 line (default)”.
STEP 8: AFPC
Assign internal LAN routing data.
FPC (Fusion Point Code): Assign FPC number (1-253) of the Destination Node.
FCCH: Assign “1”.
C_RT (Connection Router): 1-1023
FCHN/FPCN (FCH/FPC Number): Assign the FCH Number, specified in STEP 6.
P_ROUTE (Priority Route): 0/1 = FCCH/FGH
Example data assignment is shown in Figures 5-50 and...

NDA-24299 CHAPTER 5
Page 111
Revision 1.0
DATA PROGRAMMING
Assignment of FCH Related Data
STEP 9: AETH
Assign the external router routing data.
FPC (Fusion Point Code): Assign FPC number (1-253) of the Destination Node.
FCHN (FCH Number): Assign the FCH Number, specified in STEP 6.
C_RT (Connection Route): 1-1023
DST_IP (Destination IP Address): Assign FGH IP address of the Destination Node.
NEXT_IP (Next IP Address): Assign FGH IP address of the Next Node (Node to be passed to).
Example data assignment...

CHAPTER 5 NDA-24299
Page 112
Revision 1.0
DATA PROGRAMMING
Assignment of FCH Related Data
STEP 10: ACAN
Assign the Fusion Connection Index Code (FCIC) for the Next Node.
FPC (Fusion Point Code): Assign FPC number of the Next Node (Node to be passed to).
FCIC (Fusion Connection Index Code): Assign Fusion CIC of the Next Node (Node to be passed to).
C_LENS (Connection_LENS): Assign DTI LENS data (Bch data), specified in STEP 2.
Figure 5-55   Sample Data Assignment (ACAN)
7.5.2 Fusion over IP
This feature...

NDA-24299 CHAPTER 5
Page 113
Revision 1.0
DATA PROGRAMMING
Assignment of FCH Related Data
Figure 5-56   Fusion over IP - Overview
 
Figure 5-57   Hardware Connections for Fusion over IP
STEP 1: ACRD
Assign Route Class Data of Speech Route, FCH, FGH routes, respectively. A sample data assignment
is shown below.
PO W ERInternet/
Intranet
Speech
Signaling
PBXPBX
Router
Router
POWER
Node ANode B
Fusion network is realized via the Internet/Intranet.
Speech
Q-sig
CPU PBX
FCHFGHDTI
LANIROUTER
 
Nail Down...

CHAPTER 5 NDA-24299
Page 114
Revision 1.0
DATA PROGRAMMING
Assignment of FCH Related Data
Figure 5-58    Sample Data Assignment (ACRD)
STEP 2: ACTK
Assign the connection trunk data of DTI, FCH, and FGH cards, using the ACTK command. When
assigning FCH, FGH trunk data, eight trunks must be set. A sample data assignment of FCH, FGH
card is as follows.
Figure 5-59   Sample Data Assignment (ACTK)
Q-sig
PBX
FCH FGHDTI
ROUTER
Nail  Down Connection
T1 speech
signaling
FGHFCCH Speech
1
2
3
4
5
6
7
8
9
10
11
12...

NDA-24299 CHAPTER 5
Page 115
Revision 1.0
DATA PROGRAMMING
Assignment of FCH Related Data
STEP 3: MBCT
Unbusy the connection trunk data assigned in the previous step, by using the MBCT command. This
is required for FCH, FGH trunks as well as speech channels.
STEP 4: AFCH
Assign FCH number on an FCH circuit card basis. In the following example, FCHN=1 is assigned
for the FCH circuit card. For the FGH card, FCHN assignment is not necessary.
Figure 5-60   Assignment of FCHN (example)Note 
Q-sig
PBX
FCH...