NEC Neax 2400 Imx System Operations And Maintenance Manual

CHAPTER 8 NDA-24238
Page 584
Revision 3.0
MAINTENANCE COMMANDS
DTF303N:Display of UCD Station Peg Count Data for Fusion Network
1. Functional Outline
This command is used for displaying the result of traffic measurement data for “Type”=10 (UCD Station Peg
Count) assigned by the ATRFN command.
2. Parameters
Traffic Data 1: Terminal Traffic-DTF101N
Route Traffic-DTF102N
Station Peg Count-DTF103N
Attendant Peg Count-DTF104N
Route Peg Count-DTF105N
Traffic Data 2: Service Peg Count-DTF201N
Traffic Data 3:...

NDA-24238 CHAPTER 8
Page 585
Revision 3.0
MAINTENANCE COMMANDS
DTF501N:Display of Attendant Answering Peg Count Data for Fusion Network
1. Functional Outline
This command is used for displaying the result of traffic measurement data for “Type”=15 (ATT Answering
Peg Count) assigned by the ATRFN command.
2. Parameters
Traffic Data 1: Terminal Traffic-DTF101N
Route Traffic-DTF102N
Station Peg Count-DTF103N
Attendant Peg Count-DTF104N
Route Peg Count-DTF105N
Traffic Data 2: Service Peg Count-DTF201N
Traffic...

CHAPTER 8 NDA-24238
Page 586
Revision 3.0
MAINTENANCE COMMANDS
DTF601N:Display of Connection Route Peg Count Data for Fusion Network
1. Functional Outline
This command is used for displaying the result of traffic measurement data for “Type”=18 (Connection Route
Peg Count) assigned by the ATRFN command.
2. Parameters
Traffic Data 1: Terminal Traffic-DTF101N
Route Traffic-DTF102N
Station Peg Count-DTF103N
Attendant Peg Count-DTF104N
Route Peg Count-DTF105N
Traffic Data 2: Service Peg Count-DTF201N
Traffic...

NDA-24238 CHAPTER 8
Page 587
Revision 3.0
MAINTENANCE COMMANDS
DTF602N:Display of Connection Route Traffic Data for Fusion Network
1. Functional Outline
This command is used for displaying the result of traffic measurement data for “Type”=19 (Connection Route
Traffic) assigned by the ATRFN command.
2. Parameters
Traffic Data 1: Terminal Traffic-DTF101N
Route Traffic-DTF102N
Station Peg Count-DTF103N
Attendant Peg Count-DTF104N
Route Peg Count-DTF105N
Traffic Data 2: Service Peg Count-DTF201N
Traffic Data...

CHAPTER 8 NDA-24238
Page 588
Revision 3.0
MAINTENANCE COMMANDS
FLINST:File Install
1. Functional Outline
This command is used to install the DPSW-dedicated database files to your MAT. This command is necessary
to provide each circuit card’s various information (such as circuit card name, equipped switch names, etc.)
when your system uses the DPSW/DPKG command.
2. Parameters
Input Data
None
Buttons
Copy: Click to start the data file install.
Exit: Click to exit this command.

(1) Start up the FLINST...

NDA-24238 CHAPTER 8
Page 589
Revision 3.0
MAINTENANCE COMMANDS
HDD_FDD:Data Control Between HDD and FDD
1. Functional Outline
This command is used to install the program data from FDD of PBX to HDD of PBX, and to verify the program
data between FDD of PBX and HDD of PBX.
2. Parameters
Input data [When system uses software Release 1 or 2]
System Select: HFD0
HFD1
Direction Select: Floppy Disk to Hard Disk
Verify HDD against FDD
Note:Hard Disk to Floppy Disk cannot be selected.
Data Type Selection:...

CHAPTER 8 NDA-24238
Page 590
Revision 3.0
MAINTENANCE COMMANDS
Number Sharing Note 3
Call Block 
ACD Data Memory
LP Select: This data appears when Call Forwarding, Speed Calling, User Assign Soft Key,
Number Sharing or Call Block data is designated.
File Name Select
Auto Verify Afterward
Note 1:When Data Memory is selected, Network Data Memory (NDM) and Local Data Memory (LDM) are
also saved/verified simultaneously.
Note 2:Program data can be valid when Floppy Disk to Hard Disk option or Verify HDD...

NDA-24238 CHAPTER 8
Page 591
Revision 3.0
MAINTENANCE COMMANDS
HDD_MAT:Data Control Between HDD and MAT
1. Functional Outline
This command is used to save the following data from HDD of PBX to MAT.
2. Parameters
Input data
Direction Select: PBX Hard Disk to MAT
MAT to PBX Hard Disk
Verify HDD against MAT
Data Type Selection: Data Memory
Note 1
Name display
Wireless Call Forwarding
Program data
Note 2
Call Forwarding
Speed Calling
User Assign Soft Key 
Number Sharing 
Note 3
Call Block 
ACD Data Memory
LP...

CHAPTER 8 NDA-24238
Page 592
Revision 3.0
MAINTENANCE COMMANDS
HDD_MAT_N:Data Control Between HDD and MAT for NDM
1. Functional Outline
This command, available at the NCN only, installs (overwrites) the updated Program data from the centralized
MAT onto the HDD of all local nodes. To use this command, first install the updated program data on the HDD
of the MAT and then execute the program installing onto the HDD of each LN. 
2. Parameters
Input data
Data Type Selection:  Select all the listed program...

NDA-24238 CHAPTER 8
Page 593
Revision 3.0
MAINTENANCE COMMANDS
HDFP:HDD Format of PBX
1. Functional Outline
This command is used to execute the formatting of the HDD of PBX.
2. Parameters
Input Data (Selection by check)
0 System: HDD of No.0 System
1 System: HDD of No.1 System
Buttons
Execute: Click to execute the formatting.
Close: Click to exit this command.