NEC Neax 2400 Imx Oai System Manual

ND-70895 (E) CHAPTER 5
 Page 71
Revision 1.0
OFFICE DATA DESIGN
Procedure for Setting Office Data for OAI Services
3.3.3 Data Programming
Assignment
1. ASYD (System Data)
SYS1
INDEX 77
b2: 0 (MW Lamp Refresh Control is in service)
INDEX 179
b6: 0 (OAI services are provided)
2. ARPC (Remote Point Code for Centralized Service)
For providing centralized services at the Message Center within a No. 7 CCIS Network,
assign the point codes for the remote offices belonging to the main office
CSN: Centralized...

CHAPTER 5 ND-70895 (E)
Page 72
Revision 1.0
OFFICE DATA DESIGN
Procedure for Setting Office Data for OAI Services
3.4 TCP/IP Address (Assignment from MAT)
3.4.1 Functional Outline
In an OAI system to be connected with the host computer via the Ethernet, this function allows use of
TCP/IP port with the self internet address (TCP/IP address) of the NEAX2400 IMX assigned from the
MAT.
Also, whether system message “4-R” (IOC card for the host computer is faulty) is to be output or not
when the connection...

ND-70895 (E) CHAPTER 5
 Page 73
Revision 1.0
OFFICE DATA DESIGN
Procedure for Setting Office Data for OAI Services
3.4.3 Data Programming
TCP/IP Address Assignment
1. Assignment
ASYDL (System Data (LDM))
Assign TCP/IP address
SYS1
INDEX 515 ~ 518
2. Deletion
ASYDL (System Data (LDM))
Delete TCP/IP address
SYS1
INDEX 515 ~ 518
Stopping the system message of “4-R”
1. Assignment
ASYDL (System Data (LDM))
SYS1
INDEX 864
b1 = 1 (The system message (4-R) is not output when TCP/IP connection is normally...

CHAPTER 5 ND-70895 (E)
Page 74
Revision 1.0
OFFICE DATA DESIGN
Procedure for Setting Office Data for OAI Services
3.5 Name Display
3.5.1 Functional Outline
This service is for displaying information (user’s name, station number, etc.) on the LCD of Dterm.
1. Catch internal call
2. Catch Forwarding Call from Call Forwarding Busy Line, Call Forwarding Absent, Call Forwarding
Don’t Answer, Station Hunting, or etc..
3.5.2 Using Conditions
1. Maximum 16 digits of user’s information can be displayed on LCD...

ND-70895 (E) CHAPTER 5
 Page 75
Revision 1.0
OFFICE DATA DESIGN
Procedure for Setting Office Data for OAI Services
3.5.3 Data Programming (Set up from User’s Application)
1. Assignment
ASYD
SYS1
INDEX31: 04: mount capacity of Common Memory (CM) 4Mbyte
INDEX78
b0 = 1 (Intermediate Station Number Display is in service)
b1 = 1 (Service Assortment Display is in service)
b3: Dial Number Display 0/1: Out/In service
b5 = 1 (Name Display Service is in service)
INDEX79
b5: Expanded Name Display (displaying...

CHAPTER 5 ND-70895 (E)
Page 76
Revision 1.0
OFFICE DATA DESIGN
Procedure for Setting Office Data for OAI Services
3.6 Inter Node Name Display
3.6.1 Functional Outline
Name Display Service is available between the network.
Name Display Service means for the facility of displaying letters (alphabet and etc.) on LCD of the
D
term.
Catching call from other internal line
3.6.2 Using Conditions
1. When Calling party is calling Called party, the LCD of Calling party will display Called party’s
name information...

ND-70895 (E) CHAPTER 5
 Page 77
Revision 1.0
OFFICE DATA DESIGN
Procedure for Setting Office Data for OAI Services
11. The objected terminal of Name Display Service is only Dterm which has LCD.
12. “Office Code” + “Station Number” is normally displayed. However, when use of a logical number
is specified, only the logical number without an office code is displayed. (ONE CCIS network is
assigned only one logical number.)
13. When a call has been transferred by “Call Forwarding All Outside Line Call” or...

CHAPTER 5 ND-70895 (E)
Page 78
Revision 1.0
OFFICE DATA DESIGN
Procedure for Setting Office Data for OAI Services
3.6.3 Data Programming (Set up from User’s Application)
Assignment 
Those below are explanation of the Assignment according to Name Information which is set up
from User’s Application.
1. ASYD
SYS1
INDEX 78
b5 = 1 (Name Display Service is in service)
b3: Dial Number Display 0/1: Out/In service
INDEX 79
b6 = 0 (OAI Service is in service)
INDEX 241
b1: Name Display 0/1: 8-digit/16-digit...

ND-70895 (E) CHAPTER 5
 Page 79
Revision 1.0
OFFICE DATA DESIGN
Procedure for Setting Office Data for OAI Services
3.7 OAI Fusion
Main advantages of OAI Fusion fall down into the following. OAI Fusion systems can be divided into the
following two types: 
 OAI Terminal Anywhere
 Multiple IPs
3.7.1 OAI Terminal Anywhere
3.7.1.1 Functional Outline
In this configuration (OAI Terminal Anywhere), the OAI terminal can be installed in any Fusion node
whether the node has the IP or not (those OAI terminals in...

CHAPTER 5 ND-70895 (E)
Page 80
Revision 1.0
OFFICE DATA DESIGN
Procedure for Setting Office Data for OAI Services
(d) The node that accommodates the IP must be initialized when all the other nodes are in on-line
mode.
(e) The User’s Application (UAP) must be booted up after the confirmation of the establishment
of the Fusion link.
(f) When you add a node/nodes to the network, you have to initialize the node that accommodates
the IP.
3.7.1.3 Data Programming
STEP 1: Assignment of System Data
(Data for OAI...