Home > NEC > Communications System > NEC Neax 2400 Imx Ccis Features And Specifications

NEC Neax 2400 Imx Ccis Features And Specifications

Here you can view all the pages of manual NEC Neax 2400 Imx Ccis Features And Specifications. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 61

NEAX2400 IMX CCIS Features and Specifications
Page 46NDA-24222, Issue 3
C-50 Call Transfer - All Calls - CCIS
Operating Procedure (cont’d)
3. Station A dials the number for B; receives ringback tone. Station B is rung. (Note 1)
Note 1:
The status of Station A can be restored to normal with a switch hook flash in one of the following cases:
When Station A has received busy tone.
When Station B is under a call restriction or when Station A cannot access Station B for some other reasons.
When Station B does...

Page 62

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 47
Call Transfer - All Calls - CCIS C-50
Operating Procedure (cont’d)
5. Station A hangs up (Note 3); Stations B and C are connected with each other.
Note 3:
If Station A switch hook flashes instead of hanging up, a three-way connection is set up.
Service Conditions
1. When TRUNK-TO-TRUNK CONNECTION [T-10] is provided, an incoming or outgoing network or TIE
Line call may be transferred to an outgoing network trunk, provided that the...

Page 63

NEAX2400 IMX CCIS Features and Specifications
Page 48NDA-24222, Issue 3
C-50 Call Transfer - All Calls - CCIS
Service Conditions (cont’d)
2. The THREE-WAY CALLING [T-2] feature allows a maximum of three parties on one connection. The
three parties can be:
 Three stations,
 Two stations and one trunk, or 
 One station and two trunks.
3. The maximum number of simultaneous THREE-WAY CALLING [T-2] connections is dependent upon
the quantity of conference trunks (Route 909s) programmed in the system. 
4....

Page 64

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 49
Call Transfer - All Calls - CCIS C-50
Interactions (cont’d)
4. Upon establishing a CONSULTATION HOLD [C-58] connection and dialing a third party, if the user
receives busy or reorder tone instead of ringback tone, the user flashes once to disconnect the tone and
reconnect the second party.
5. Upon establishing a CONSULTATION HOLD [C-58] connection and dialing a MISCELLANEOUS
TRUNK ACCESS [M-2] code, if no dial tone is given (after...

Page 65

NEAX2400 IMX CCIS Features and Specifications
Page 50NDA-24222, Issue 3
C-51 Called Station Status Display - CCIS
C-51  Called Station Status Display - CCIS 
General Description
This feature provides for the status of a called station to appear on the LCD display of a calling Dterm using CCIS.
Operating Procedure
Lift the handset or press the SPEAKER key and dial the desired station. The LCD display indicates the status of the
called station.
Service Conditions
1. If the called station is idle, the...

Page 66

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 51
Calling/Called Number Display - CCIS C-52
C-52 Calling/Called Number Display - CCIS
General Description
This service feature allows an Inter-Office calling/called number display when the Attendant Console and the
calling/called party belong to different offices within the CCIS network. 
If the Attendant dials a telephone number, the dialed telephone number is displayed on the Console (Calling Number
Display). If a station calls an...

Page 67

NEAX2400 IMX CCIS Features and Specifications
Page 52NDA-24222, Issue 3
C-52 Calling/Called Number Display - CCIS
Operating Procedure (cont’d)
2. The Attendant presses the ANSWER key; Station B and the Attendant are connected. The number of
Station B is displayed on the Attendant Console.
Service Conditions
For the Attendant Console:
1. At the time of call origination:
a.) The called number is displayed (last 6 digits) only when the called party has answered the call.
2. At the time of call termination:...

Page 68

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 53
Call Processing Indication - CCIS C-53
C-53  Call Processing Indication - CCIS 
General Description
This feature provides a visual indication at the ATTENDANT CONSOLE [A-3] of all CCIS calls being handled by
the ATTENDANT CONSOLE [A-3] through the CCIS network.
Operating Procedure
Refer to the operation guide of the Attendant Console.
Service Conditions
1. The status of calls being processed by the Attendant is indicated by the...

Page 69

NEAX2400 IMX CCIS Features and Specifications
Page 54NDA-24222, Issue 3
C-54 Call Transfer - Attendant - CCIS
C-54 Call Transfer - Attendant - CCIS
General Description
This feature allows a user to transfer a call through the CCIS network to an Attendant Console located in a Main or
Satellite node, while connected to a CCIS network call. 
Operating Procedure
To transfer a call to an Attendant Console: 
1. While engaged in a Central Office trunk call, switch hook flash; receive special dial tone.
2. Dial...

Page 70

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 55
Centralized Billing - CCIS C-55
C-55  Centralized Billing - CCIS
General Description
This service is used for collecting billing information from each office within the network and directing it to
associated offices, thus providing the billing information to the CENTRALIZED BILLING CENTER via an RS-
232C interface.
(Series 7400 software enhancement) This feature may be provided through multiple FCCS groups (networks
where multiple...
Start reading NEC Neax 2400 Imx Ccis Features And Specifications

Related Manuals for NEC Neax 2400 Imx Ccis Features And Specifications

All NEC manuals