NEC Neax 2400 Imx Ccis Features And Specifications

NEAX2400 IMX CCIS Features and Specifications
Page 56NDA-24222, Issue 3
C-55 Centralized Billing - CCIS
Operating Procedure (cont’d)
2. Station C goes off-hook; Stations A and C are connected with each other in conversation.
3. Stations A and C go on-hook; SMDR information is sent out to the CENTRALIZED BILLING CENTER.
4. Station B dials Station C in Node C; Station B receives ringback tone and Station C is rung.
5. Station C goes off-hook; Stations B and C are connected in conversation.
STN (c)
STN (a)...

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 57
Centralized Billing - CCIS C-55
Operating Procedure (cont’d)
6. Stations C and B go on-hook; SMDR information is sent to the Billing Center through the CCIS line.
Service Conditions 
1. The maximum number of billing information output ports at the Center Office is 2.
2. Information storage capacity of the office should be 700 calls.
3. If billing information in excess of the above mentioned storage capability is generated at a time...

NEAX2400 IMX CCIS Features and Specifications
Page 58NDA-24222, Issue 3
C-55 Centralized Billing - CCIS
Service Conditions (cont’d)
Legend:
* Destination node
** Node to be connected to the FCCS group where the new number is added
*** Node where the telephone number is located before the Number Portability activation
No.Pattern (telephone number is moved from A to B)Node Requiring Data Change
1. Moving number within the same FCCS group. NCN in Center FCCS group
2. Moving number in FCCS group to another...

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 59
Centralized Day/Night Mode Change - CCIS C-56
C-56  Centralized Day/Night Mode Change - CCIS
General Description
This service feature switches the DAY/NIGHT mode of Satellite Nodes which are linked to the Main Node via
CCIS, in accordance with the DAY/NIGHT mode switching [A-3] at the Main Node.
Operating Procedure
Note:
Node B - Node E are Satellite Nodes.
1. Press the NIGHT key on the Attendant Console for each Tenant; the NIGHT...

NEAX2400 IMX CCIS Features and Specifications
Page 60NDA-24222, Issue 3
C-56 Centralized Day/Night Mode Change - CCIS
Service Conditions (cont’d)
4. At a Satellite Node, only TN = 1 is possible.
5. When a Satellite Node is equipped with DAY/NIGHT mode changeover features, changeover of the
Satellite Node DAY/NIGHT mode is not performed from the Main Node. 
6. The Satellite Node cannot have an Attendant Console programmed.
7. Selecting DAY/NIGHT option from the NEAX2400 IMX does not change the NEAX2000...

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 61
Centralized System Management Report - CCIS C-57
C-57  Centralized System Management Report - CCIS 
General Description
This service feature provides automatic reporting of fault information of Satellite Nodes to the CENTRALIZED
MANAGEMENT CENTER with an external indication of the detected fault.
(Series 7400 software enhancement) This feature may be provided through multiple FCCS groups (networks
where multiple NEAX2400 IMXs are...

NEAX2400 IMX CCIS Features and Specifications
Page 62NDA-24222, Issue 3
C-57 Centralized System Management Report - CCIS
Service Conditions (cont’d)
(Series 7400 software enhancement) Service Conditions when this service is provided in the network
through FCCS groups and NEAX2000 IVS:
1.(Series 7400 software enhancement) The Centralized System Message Report feature for this network
may be controlled only by the Centralized MAT.
Note:
See Centralized Maintenance - CCIS [C-167] for explanation of the...

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 63
Consultation Hold - All Calls - CCIS C-58
C-58  Consultation Hold - All Calls - CCIS
General Description
This feature permits a user within the CCIS network to hold any incoming or outgoing public network, intra-office,
or CCIS call while originating a call to another station within the CCIS network.
Operating Procedure
To hold the original call and place a second call from a single-line telephone:
1. Switch hook flash; receive...

NEAX2400 IMX CCIS Features and Specifications
Page 64NDA-24222, Issue 3
C-58 Consultation Hold - All Calls - CCIS
Interactions
1. This feature is denied whenever the destination telephone set is engaged in any state other than simple two-
party connection. 
2. CONSULTATION HOLD-ALL CALLS - CCIS must always be made available when features require
hooking services.
3. Indexes 156 and 157 also are used for SMDR, establishing an arbitrary connection timing when no answer
supervision is used. 
4. If a party...

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 65
Call Forwarding Assignment - Attendant - CCIS C-94
C-94  Call Forwarding Assignment - Attendant - CCIS
General Description
This feature allows the attendant of an Attendant Console to set/cancel the following Call Forwarding services to a
station within the CCIS network.
CALL FORWARDING-ALL CALLS [C-5]
CALL FORWARDING-ALL CALLS - CCIS [C-45]
CALL FORWARDING-BUSY LINE [C-2]
CALL FORWARDING-BUSY LINE - CCIS [C-46]
CALL...