Home > NEC > Communications System > NEC Neax 2400 Imx Ccis Features And Specifications

NEC Neax 2400 Imx Ccis Features And Specifications

Here you can view all the pages of manual NEC Neax 2400 Imx Ccis Features And Specifications. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 81

NEAX2400 IMX CCIS Features and Specifications
Page 66NDA-24222, Issue 3
C-94 Call Forwarding Assignment - Attendant - CCIS
Service Conditions (cont’d)
a.) Pattern 1 (ASYD, SYS2, INDEX 15, b4= 0)
XX
 - XX - XXXXX - XXXXX
This pattern is used when a unified numbering plan is in use within the CCIS network.
b.) Pattern 2 (ASYD, SYS2, INDEX 15, b4 = 1)
XX
 - XX - XXXXX - XXXXX - #
This pattern is used when a unified numbering plan is not in use within the CCIS network.
2. Since the numbering plan at the...

Page 82

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 67
CCIS Networking via IP C-163
C-163 CCIS Networking via IP
            (Series 7400 software feature)
General Description
This feature allows the system to utilize the CCIS network over Internet/Intranet. To establish or release a call,  an
IPTRK card is used for both speech and signal channels.
Operating Procedure
No manual operation is required.
Service Conditions
1. To send or receive speech and CCIS signals, each node shall use...

Page 83

NEAX2400 IMX CCIS Features and Specifications
Page 68NDA-24222, Issue 3
C-163 CCIS Networking via IP
Service Conditions (cont’d)
10. The table below shows CCIS service features to be provided beyond the nodes:
11. This feature does not support Broad Band Services H0/H1.
12. This feature can use Link Re-connection function. At this time, service conditions are the same as those
for the normal CCIS network.
13. PAD can be provided for “receive” control only.
14. IPTRK-related tandem connection is not...

Page 84

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 69
Centralized Maintenance - CCIS C-167
C-167 Centralized Maintenance - CCIS
          (Series 7400 software feature)
General Description
This FCCS service allows all nodes (NEAX2400 IMX systems) in the multiple FCCS groups (networks where
multiple NEAX2400 IMXs are connected via FCCS link) and NEAX2000 IVS systems, connected via CCIS link,
to be maintained from a single MAT. The MAT used for this feature is called Centralized MAT....

Page 85

NEAX2400 IMX CCIS Features and Specifications
Page 70NDA-24222, Issue 3
D-41 Data Communication - CCIS
D-41  Data Communication - CCIS
General Description
This service allows Inter-Office data communication service where the Digital Interface (DTI) is used as the CCIS
Line over a T1 channel (Digital Link Channel). 
With this service, the data communication line between synchronous and asynchronous terminals can be directly
connected to the DTI without using the MODEM Pooling or a DST card.
Operating...

Page 86

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 71
Data Communication - CCIS D-41
Operating Procedure (cont’d)
When cancelling the data connection: 
1. Press the DATA key on Dterm (a); the LCD of Dterm (a) restores the display of Time and Date.
Note:
If the opposite DTE is released, the buzzer on the Data Module/Data Adapter sounds three times.
Enter Release command RLS RETURN from the keyboard of the DTE. RLS and RELEASED are displayed on the
monitor screen. The data connection has...

Page 87

NEAX2400 IMX CCIS Features and Specifications
Page 72NDA-24222, Issue 3
D-65 Data Interface - Automatic Answer - CCIS
D-65  Data Interface - Automatic Answer - CCIS 
General Description
This feature allows a data terminal to automatically answer an incoming CCIS call without manual operation,
therefore, providing the capability of receiving electronic mail.
Operating Procedure
To activate AUTOMATIC ANSWER for terminating data calls, Automatic Answer Mode can be set by any of
the following methods:
1. Set...

Page 88

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 73
Data Line Security - CCIS D-66
D-66  Data Line Security - CCIS 
General Description
This feature allows line circuits used for data transmission to be protected from interruptions, such as,
ATTENDANT CAMP-ON WITH TONE INDICATION - CCIS [A-45], BUSY VERIFICATION - CCIS [B-9],
EXECUTIVE RIGHT-OF-WAY - CCIS [E-8], and ATTENDANT OVERRIDE [A-7].
Operating Procedure
No manual operation is required.
Service Conditions 
1. If an Attendant...

Page 89

NEAX2400 IMX CCIS Features and Specifications
Page 74NDA-24222, Issue 3
D-67 Data Line Privacy - CCIS
D-67  Data Line Privacy - CCIS 
General Description
This feature automatically prevents interruptions from features such as ATTENDANT CAMP-ON WITH TONE
INDICATION - CCIS [A-45], BUSY VERIFICATION - CCIS [B-9], and EXECUTIVE RIGHT-OF-WAY - CCIS
[E-8] during data transmission through the CCIS network.
Operating Procedure
Data Connection (Dterm-Data Adapter/Data Module): No manual operation is required....

Page 90

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 75
Data Privacy on Demand - CCIS D-68
D-68  Data Privacy on Demand - CCIS
General Description
This feature allows a user to prevent interruptions by features such as ATTENDANT CAMP-ON - CCIS [A-45],
BUSY VERIFICATION - CCIS [B-9], and EXECUTIVE RIGHT-OF-WAY - CCIS [E-8] during data transmission
through the CCIS network by dialing a DATA PRIVACY feature code.
When the incoming call cannot be restricted since data communication is...
Start reading NEC Neax 2400 Imx Ccis Features And Specifications

Related Manuals for NEC Neax 2400 Imx Ccis Features And Specifications

All NEC manuals