NEC Neax 2400 Imx Ccis Features And Specifications

NEAX2400 IMX CCIS Features and Specifications
Page 86NDA-24222, Issue 3
D-75 Distinctive Ringing - CCIS
D-75 Distinctive Ringing - CCIS
General Description
This service feature allows Inter-Office Distinctive Ringing for a call terminated from a different PBX in the CCIS
network.
Operating Procedure
1. Station (c) and the Attendant in Node A are engaging in a call. 
2. The Attendant dials the number for Station (b); receives ringback tone. Station (c) receives Hold Tone,
and Station (b) is rung...

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 87
Do Not Disturb - Dterm - CCIS D-76D
D-76D  Do Not Disturb - Dterm - CCIS
General Description
This feature allows a Dterm user to temporarily establish a DO NOT DISTURB status, during which time incoming
CCIS calls will be denied access to the MY-Line of the Dterm.
Operating Procedure
To set DO NOT DISTURB:
1. Press the DO NOT DISTURB (DND) key. The associated LED will light. The LCD displays:
To cancel DO NOT DISTURB:
1. Press the...

NEAX2400 IMX CCIS Features and Specifications
Page 88NDA-24222, Issue 3
D-76D Do Not Disturb - Dterm - CCIS
Interactions (cont’d)
2. CALL FORWARDING-BUSY LINE - CCIS [C-45]: This feature can be activated to an idle station that
has set DO NOT DISTURB - CCIS. 

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 89
Data Hotline - CCIS D-86
D-86 Data Hotline - CCIS
General Description
This feature allows data stations to access Data Terminal Equipment (DTE) in a satellite office of a CCIS network,
by automatically dialing a SPEED CALLING-SYSTEM [S-3] number.
Operating Procedure
1. Manual CALL Origination via a Data Adapter: 
a.) Press the D
term DATA key
b.) The DATA lamp will flash and the calling Dterm will display the following:
2. Manual...

NEAX2400 IMX CCIS Features and Specifications
Page 90NDA-24222, Issue 3
D-86 Data Hotline - CCIS
Interactions (cont’d)
4. TOLL DIVERSION/TOLL DENIAL [T-6] and TOLL RESTRICTION-3/6 DIGIT [T-7] will not interact
with this feature if a station is allowed access to an ADC via Service Feature Class. 
5. This feature designates the use of a SPEED CALLING-SYSTEM [S-3] number when the DATA key is
activated.
6. UNIVERSAL SENDER [U-3] must also be provided. 

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 91
Dialed Number Display - Recall - CCIS D-91
D-91  Dialed Number Display - Recall - CCIS
General Description
When the Attendant Console makes an outgoing call to a CCIS line by means of a tandem connection, and the
Attendant has left the call by pressing the RELEASE button before the called Party answers, the Attendant Console
will be recalled if the Called Party does not answer. This service feature changes the display, when the...

NEAX2400 IMX CCIS Features and Specifications
Page 92NDA-24222, Issue 3
D-91 Dialed Number Display - Recall - CCIS
Operating Procedure (cont’d)
4. If, after a predetermined time has elapsed, Subscriber (a) is not connected with Station (b), the call isrecalled to the Attendant Console in Node A and it answers. Press the DEST key; the dialed number of
Station (b) is indicated. Station (b) continues to ring until the Attendant presses CANCEL Key.
Service Conditions
If the called party answers after the...

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 93
Dual Hold Dterm - CCIS D-93D
D-93D Dual Hold Dterm - CCIS
General Description
This feature allows two connected Dterms to simultaneously be placed on non-exclusive hold over a CCIS link. This
enables the held parties to answer or originate a call from a sub-line appearance or the idle Prime Line. 
Operating Procedure
To place a call in DUAL HOLD - CCIS:
1. When two Dterms are connected via CCIS, either Dterm user can press the HOLD...

NEAX2400 IMX CCIS Features and Specifications
Page 94NDA-24222, Issue 3
E-8 Executive Right-of-Way - CCIS
E-8 Executive Right-of-Way - CCIS 
General Description
This service feature allows Inter-Office Executive Right-of-Way when the bridging-in station and the bridged
station respectively, belong to a different PBX in the CCIS network.
Operating Procedure
1. While Stations A and B are engaging in a call, Station C goes off-hook and receives dial tone. 
2. Station C dials the number for Station B and...

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 95
Executive Right-of-Way - CCIS E-8
Operating Procedure (cont’d)
5. Station A hangs up; Stations C and B remain connected with each other until either or both go on-hook.
Service Conditions
1. Two burst tones are transmitted upon activation to alert connected parties that an EXECUTIVE override
connection is being made. 
2. EXECUTIVE Right-of-Way may be denied if the busy station is:
a.) Dialing or in LINE LOCKOUT [L-3]
b.) Listening...