NEC Neax 2400 Imx Ccis Features And Specifications

NEAX2400 IMX CCIS Features and Specifications
Page 96NDA-24222, Issue 3
E-9 Elapsed Time Display - CCIS
E-9 Elapsed Time Display - CCIS
General Description
This feature provides an LCD display of the time elapsed while a Dterm is connected to any trunk through the CCIS
network.
Operating Procedure
No manual operation is required.
Service Conditions
1. The elapsed time is displayed in the eight left-side positions of the LCD display.
2. The elapsed time can reach a maximum of 9 hours, 59 minutes and 59...

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 97
E911 - ANI Unified Number of Digits - CCIS E-20
E-20  E911 - ANI Unified Number of Digits - CCIS
General Description
This feature allows a station or Attendant Console, called via CCIS, to perform E911-ANI service. This feature is
functionally identical to AUTOMATIC NUMBER IDENTIFICATION (ANI) [A-87]. 
Operating Procedure
The operating procedure is the same as that of a normal outgoing connection.
Service Conditions 
1. This feature...

NEAX2400 IMX CCIS Features and Specifications
Page 98NDA-24222, Issue 3
E-20 E911 - ANI Unified Number of Digits - CCIS
Service Conditions (cont’d)
 If OG call is from an ATTCON and Individual ATT Access Code is assigned, and also ANI
data is assigned:
KP-0
-N**-****-ST
  If OG call is from an ATTCON and Individual ATT Access Code is unassigned, and ANI data
is assigned:
KP-0
-N**-****-ST
 If OG call is from an ATTCON and ANI data is unassigned:
KP-1
- ST
b.) Outgoing call from station/Attendant...

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 99
E911 - ANI Unified Number of Digits - CCIS E-20
Service Conditions (cont’d)
The COC digit is 82; then assign ANI information. 
Example 2:
Office number: 826
Station number: 34xxx, 4xxx 
The COC digit is 826; then assign ANI information.
11. After digits have been sent out, DDD seizure tone is not sent. 
12. Other interactions are the same as those of outgoing calls by MF signalling. 
13. An 8RST-K circuit card is used for this...

NEAX2400 IMX CCIS Features and Specifications
Page 100NDA-24222, Issue 3
F-12 Flexible Numbering of Stations - CCIS
F-12  Flexible Numbering of Stations - CCIS 
General Description
This feature allows voice and data station numbers to be assigned to any instrument in the CCIS network, based
solely on numbering plan limitations.
Operating Procedure
Refer to the NEAX2400 IMX Office Data Specification.
Service Conditions
1. Careful consideration should be given to the network numbering plan to avoid...

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 101
Hands-free Answerback - Dterm - CCIS H-10D
H-10D Hands-free Answerback - Dterm - CCIS 
General Description
This feature allows a Dterm user to respond to a VOICE CALL - CCIS [V-7] without lifting the handset.
Operating Procedure
To answer:
1. Lift the handset and press the line key to answer the call. 
2. Press feature key and “1; the MIC LED lights. 
3. Press feature key and “5” to select hands-free operation. 
4. Replace the...

NEAX2400 IMX CCIS Features and Specifications
Page 102NDA-24222, Issue 3
H-11 House Phone - CCIS
H-11  House Phone - CCIS
General Description
This feature allows selected stations to call an Attendant Console through the CCIS network, simply by going off-
hook.
Operating Procedure
To call the Attendant:
1. The HOUSE PHONE - CCIS user lifts the handset.
2. The Attendant is automatically called.
Service Conditions
1. Attendant Console indications will appear as follows: 
a.) ATND lamp flashes.
b.) Console...

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 103
Hotline - CCIS H-12
H-12 Hotline - CCIS
General Description
This feature allows two stations at different nodes in the CCIS network to be associated with one another on an
automatic ringdown basis. 
Operating Procedure
1. Station A lifts the handset.
2. Station B is rung.
3. Station B lifts the handset; the connection is established. 
Service Conditions
1. If both phones in a HOTLINE - CCIS pair are equipped with dials, either one...

NEAX2400 IMX CCIS Features and Specifications
Page 104NDA-24222, Issue 3
I-16 Incoming Call Identification - CCIS
I-16 Incoming Call Identification - CCIS
General Description
This feature allows an Attendant to visually identify the type of service and/or trunk route which is arriving or
waiting to be answered at the Attendant Console through CCIS. 
Operating Procedure
No manual operation is required.
Service Conditions
1. A flashing lamp indicates a call waiting to be answered.
2. A steady lamp...

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 105
Individual Attendant Access - CCIS I-17
I-17  Individual Attendant Access - CCIS 
General Description
This feature permits a user to call a particular Attendant Console in the CCIS network, via an individual Attendant
Identification Number.
Operating Procedure
1. The user dials an individual Attendant Identification Number. 
2. The directed Attendant receives an INCOMING CALL IDENTIFICATION [I-16] indication and can
answer using...