NEC Neax 2400 Imx Ccis Features And Specifications

NEAX2400 IMX CCIS Features and Specifications
Page 146NDA-24222, Issue 3
M-42 Multiple Call Forwarding - Don’t Answer - CCIS
Service Conditions (cont’d)
Example 2: Multiple Call Forwarding - CCIS service is restricted because the service is not effective at
the node.
12. Even if Call Forwarding is set from the forwarded station to the forwarding station, the Call Forwarding
service is effective, as shown in the example below:
When Office A selects the number of times for Call Forwarding for 5 times, five...

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 147
Multiple Call Forwarding - Don’t Answer - CCIS M-42
Service Conditions (cont’d)
15. The following are detailed examples of Call Forwarding - CCIS activation. These examples are activated
under the conditions below:
 The maximum number of times to activate the service is three (programmed in Office A and
Office B).
 The last call forwarding is operated by Call Forwarding - All Calls/Don’t Answer service.
 Any kind of D
term, ISDN...

NEAX2400 IMX CCIS Features and Specifications
Page 148NDA-24222, Issue 3
M-42 Multiple Call Forwarding - Don’t Answer - CCIS
Service Conditions (cont’d)
b.) The service is restricted because the service has already been activated the predetermined number
of times.
c.) When Office A is not available for the enhanced Call Forwarding feature, the number of times the
service is activated is decided by Office B (three times are effective in this example). Note that
Call Forwarding service from Office A to...

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 149
Multiple Call Forwarding - Don’t Answer - CCIS M-42
Service Conditions (cont’d)
d.) The Call Forwarding service is activated four times, because the call is forwarded from Office D
to Office E through FCCS link:
Note:
Call Forwarding service activated through FCCS link (C.F.*) is not included in the number of times that the Multiple
Call Forwarding - CCIS service is activated.
e.) When the trunk/station incoming call terminates...

NEAX2400 IMX CCIS Features and Specifications
Page 150NDA-24222, Issue 3
M-42 Multiple Call Forwarding - Don’t Answer - CCIS
Service Conditions (cont’d)
f.) This service is restricted when a call from the CCIS line is forwarded to other lines except CCIS
(for example: C.O. line).
Interactions
When a calling party sets the services shown below while the destination party is in busy status, the services are
performed to the first forwarded party.
1. In the case of Busy Verification - CCIS [B-9] or...

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 151
Multiple Call Forwarding - Don’t Answer - CCIS M-42
Interactions (cont’d)
3. In the case of Call Back - CCIS [C-44], service is effective to Station B in Office B. The service is invalid
to station D.
4. In the case of Step Call - CCIS [S-59], the service is valid to Station B in Office B. The service is invalid
to station D.
Office A Office B Office C Office D
Originating 
Party
Station A
Station B Station C Station D 
(Busy) 1st...

NEAX2400 IMX CCIS Features and Specifications
Page 152NDA-24222, Issue 3
M-43 Multiple Console Operation - CCIS
M-43  Multiple Console Operation - CCIS
General Description
This feature provides console operation where ATTENDANT CONSOLEs [A-3] are installed in more than one
node in the CCIS network.
Operating Procedure
No manual operation is required.
Service Conditions
1. Call transfer among ATTENDANT CONSOLEs [A-3] in different nodes is possible, but call
identification information cannot be transferred...

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 153
Multiple Console Operation - CCIS M-43
Interactions (cont’d)
4. ATTENDANT CONSOLEs [A-3] may not dial another console directly. Talk path will occur only during
INTERPOSITION TRANSFER [I-5].
5. When more than one ATTENDANT CONSOLE [A-3] is installed, a Primary ATTENDANT CONSOLE
[A-3] may be assigned (AMAT command). This ATTENDANT CONSOLE [A-3] will control the
implementation of DAY/NIGHT CLASS OF SERVICE [D-15]. 

NEAX2400 IMX CCIS Features and Specifications
Page 154NDA-24222, Issue 3
M-67 Message Center Interface - CCIS
M-67 Message Center Interface - CCIS
General Description
This service feature provides an INTERFACE to the external CPU for MESSAGE CENTER information when a
specific UCD group or console in a CCIS network is called. This interface allows external control of Message
Waiting Lamp (MWL) indications on equipped PBX stations.
(Series 7400 software enhancement) This service may be provided through...

NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 155
Message Center Interface - CCIS M-67
Operating Procedure (cont’d)
4. The user at the called station will be able to receive a message from the system by dialing the Pilot number
of the UCD station group connected to the Voice Mail System.
5. The external CPU, upon retrieval of message information, will transmit a data record requesting the PBX
to extinguish the MWL of the corresponding station.
Service Conditions
1. The call type...