NEC Neax 2400 Imx Ccis Features And Specifications
Here you can view all the pages of manual NEC Neax 2400 Imx Ccis Features And Specifications. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 191
NEAX2400 IMX CCIS Features and Specifications Page 176NDA-24222, Issue 3 S-52 Serial Call - CCIS Operating Procedure (cont’d) 5. Station (b1) answers and is connected with Station (c). The HOLD status remains on the Attendant Console. 6. Station (b1) hangs up. On the Attendant Console, the lamps in the loop key section corresponding to the incoming call keep flashing at 60 ipm, and the bell rings. Station (c) receives ringback tone. 7. The Attendant presses the loop key corresponding to the flashing...
Page 192
NEAX2400 IMX CCIS Features and Specifications NDA-24222, Issue 3 Page 177 Serial Call - CCIS S-52 Service Conditions (cont’d) 5. This feature is not applicable for tandem connections. 6. The following services cannot be used while SERIAL CALL - CCIS is activated: ATTENDANT CAMP-ON WITH TONE INDICATION - CCIS [A-45] BUSY VERIFICATION - CCIS [B-9] CALL HOLD - CCIS / CALL HOLD - D term[C-6/C-6D] EXECUTIVE RIGHT-OF-WAY [E-8]
Page 193
NEAX2400 IMX CCIS Features and Specifications Page 178NDA-24222, Issue 3 S-53D Service Display - Dterm - CCIS S-53D Service Display - Dterm - CCIS General Description This feature allows a Dterm user to receive LCD displays corresponding to the various features as they are initiated. Operating Procedure Each display is automatically generated when a service feature is initiated. Service Conditions 1. Each display is controlled by system data and is produced accordingly. A display may be allowed or...
Page 194
NEAX2400 IMX CCIS Features and Specifications NDA-24222, Issue 3 Page 179 Simultaneous Voice and Data Transmission - CCIS S-54 S-54 Simultaneous Voice and Data Transmission - CCIS General Description This feature allows a voice signal and a digital data signal of up to 56 Kbps to be transmitted simultaneously through CCIS, via a Dterm equipped with a Data Adapter. Voice and data calls can be placed to different locations. Operating Procedure To place a data call to a terminal already connected by a...
Page 195
NEAX2400 IMX CCIS Features and Specifications Page 180NDA-24222, Issue 3 S-54 Simultaneous Voice and Data Transmission - CCIS Service Conditions (cont’d) 4. If the Dterm DTX button is pressed when connected station-to-station within the CCIS network, the voice line connection is switched to MODEM POOLING - CCIS [M-39] from the Dterm Data line. Interactions 1. It is recommended that the numbering plan be set up so that voice numbers occupy one level and data levels occupy another. Therefore, a voice...
Page 196
NEAX2400 IMX CCIS Features and Specifications NDA-24222, Issue 3 Page 181 Single-Digit Station Calling - CCIS S-55 S-55 Single-Digit Station Calling - CCIS General Description This feature allows single-digit station numbers to be assigned. Operating Procedure 1. Lift the handset; receive dial tone, 2. Dial the single-digit station code, 3. The called station will ring. Service Conditions 1. The single-digit number must not duplicate the first digit of: a.) Trunk Access Codes b.) Feature Access Codes...
Page 197
NEAX2400 IMX CCIS Features and Specifications Page 182NDA-24222, Issue 3 S-56 Station-Controlled Conference - CCIS S-56 Station-Controlled Conference - CCIS General Description This feature allows any PBX station to establish a conference through CCIS. The conference can be any combination of stations and trunks (on-network and off-network parties). Operating Procedure To establish a conference call: 1. The user wishing to establish the conference (Conference Leader) calls each party to be included and...
Page 198
NEAX2400 IMX CCIS Features and Specifications NDA-24222, Issue 3 Page 183 Station-to-Station Calling - CCIS S-57 S-57 Station-to-Station Calling - CCIS General Description This feature allows any user to dial another station directly, through CCIS, without operator assistance. Operating Procedure 1. Lift the handset; receive dial tone. 2. Dial the desired telephone number. Service Conditions 1. The maximum number of digits per telephone number is eight. 2. Either Calling-Party Release or First-Party...
Page 199
NEAX2400 IMX CCIS Features and Specifications Page 184NDA-24222, Issue 3 S-58 Station-to-Station Calling - Operator Assistance - CCIS S-58 Station-to-Station Calling - Operator Assistance - CCIS General Description This feature allows a user to call another station, through CCIS, with the assistance of the Attendant Console operator. Operating Procedure To place a station-to-station call through the Attendant Console: 1. Lift the handset; receive dial tone. 2. Dial the operator access code (normally...
Page 200
NEAX2400 IMX CCIS Features and Specifications NDA-24222, Issue 3 Page 185 Step Call - CCIS S-59 S-59 Step Call - CCIS General Description This service feature allows Inter-Office Step Call when the calling station and the called station belong to different PBX’s in the CCIS network. Operating Procedure 1. While Station (a1) and (b1) are engaging in a call, Station (a2) goes off-hook and receives dial tone. 2. Station (a2) dials No. 2220 for Station (b1) and receives busy tone. 3. Station (a2) dials the...