Home > NEC > Communications System > NEC Neax 2000 Ivs2 Wcs System Manual

NEC Neax 2000 Ivs2 Wcs System Manual

Here you can view all the pages of manual NEC Neax 2000 Ivs2 Wcs System Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 11

NEAX2000 IVS2WCSSystemManual(PCS)
ND-70920 (E), Issue 1.0Page 3
CHAPTER 1
GENERAL INFORMATION
This chapter explains the WCS system outline, the equipment name
and function, system specifications, system capacity and conditions. 

Page 12

NEAX2000 IVS2WCS System Manual (PCS)Page 4ND-70920 (E), Issue 1.0
CHAPTER 1 GENERAL INFORMATION
System Outline
SYSTEM OUTLINE
The Wireless Communication System (WCS) interfaces with a Personal Station (PS) via a Zone
Transceiver (ZT).
Three types of system configurations are available:
(1) Integrated Type
The system provides both PBX and WCS functions.
(2) Adjunct Type (Analog Interface)
The WCS is an adjunctsystem to the PBX linked by LC-COT connection.
(3) Adjunct Type (CCIS Interface)
The WCS is an...

Page 13

CHAPTER 1 GENERAL INFORMATION
System Outline
NEAX2000 IVS2WCSSystemManual(PCS)
ND-70920 (E), Issue 1.0Page 5
Figure 1-1 WCS System Outline
CSICOT
LC
DATCSH ZT
SLT
PS
PS
PSPBX with WCS
(1) Integrated Type
*
DtermDLC
CSICOT
DATCSH ZT
PS
PS
PSWCS
LCPBX
(2) Adjunct Type (Analog Interface)
CSIDTI
DATCSH ZT
PS
PS
PSWCS
(3) Adjunct Type (CCIS Interface)
DTIPBX
CCIS
NOTE:For the Integrated Type and Adjust Type (CCIS Interface), virtual LC-COT
Connection data assignment is required to each PS station.
LC SLT
*
LC...

Page 14

NEAX2000 IVS2WCS System Manual (PCS)Page 6ND-70920 (E), Issue 1.0
CHAPTER 1 GENERAL INFORMATION
Card Name and Function
CARD NAME AND FUNCTION
Ta b l e 1 - 1shows the circuit card name and function for WCS.
Table 1-1 WCS Card Name and Function
CARD NAMEFUNCTIONAL
NAMEFUNCTION OUTLINE
PZ-PW122 DC/DC PWR Power Supply Card for Cell Station (Zone Transceiver)
Input: DC –24 V
Output: DC –48 V (1.7 A)
One card per PIM.
Max. 16 CS (ZT)s backed up by one card.
PN-AP00-A
[For Nor th
America/Latin
America only]DBM...

Page 15

CHAPTER 1 GENERAL INFORMATION
Card Name and Function
NEAX2000 IVS2WCSSystemManual(PCS)
ND-70920 (E), Issue 1.0Page 7
PN-2DATA DAT 2-line Digital Announcement Trunk Card
This card is used for Announcement Service on WCS.
Recording duration: Max. 60 seconds
PN-4DATC DAT 4-line Digital Announcement Trunk Card
This card is used for Announcement Service on WCS.
Recording duration: Max. 120 seconds
PN-24DTA-C DTI Digital Trunk Interface (23B + D, 1.5 Mbps) Card
Accommodates 24-channel PCM digital lines.
Used...

Page 16

NEAX2000 IVS2WCS System Manual (PCS)Page 8ND-70920 (E), Issue 1.0
CHAPTER 1 GENERAL INFORMATION
System Specifications
SYSTEM SPECIFICATIONS
Table 1-2 System Specifications
DESCRIPTION SPECIFICATIONS REMARKS
Wireless Protocol Based on second generation wireless
telephone system standard RCR-STD-28
FCC Sub part D, UTAM complied
Distance between
PBX and ZT
NOTE:At Nominal Voltage of –48 V.
Interface with
aPBXAnalog station line interface Adjunct Type
(Analog Interface)
T1 or E1 interface with CCIS Adjunct...

Page 17

CHAPTER 1 GENERAL INFORMATION
System Capacity
NEAX2000 IVS2WCSSystemManual(PCS)
ND-70920 (E), Issue 1.0Page 9
SYSTEM CAPACITY
NOTE 1:When using a PZ-M537 card, the capacity of PSs can be expanded to 256.
NOTE 2:Calling Area is a registered area to search first for a PS location.
The calling signal is sent to the ZTs that belong to the Calling Area.
Table 1-3 WCS System Capacity
DescriptionCAPACITY
IntegratedAdjunct
(Analog)Adjunct
(CCIS )
PSNOTE 1with PZ-M537 256
without PZ-M537 128
ZT 128
CSI 64
CSH 16...

Page 18

NEAX2000 IVS2WCS System Manual (PCS)Page 10ND-70920 (E), Issue 1.0
CHAPTER 1 GENERAL INFORMATION
Time Slot Allocation
TIME SLOT ALLOCATION
CSH
As shown inFigure 1-2, the CSH (PN-2CSIA) card uses the time slot on the basic memory
Highway 4. Therefore, the total number of time slots for all CSH card must be 128 time slots or
less including all other application processor cards, which use the Highway 4.
Figure 1-2 Accommodation of CSH into TDSW
CSI
The CSI (PN-2CSIA) card uses eight L/T time slots per...

Page 19

CHAPTER 1 GENERAL INFORMATION
Outline of Multi-Site Roaming
NEAX2000 IVS2WCSSystemManual(PCS)
ND-70920 (E), Issue 1.0Page 11
OUTLINE OF MULTI-SITE ROAMING
The PBX supports the JT-Q931a protocol and JT-11582 for signaling at Q-reference point
between PBXs on the private network. By supporting this protocol, the PSs can be used in any
Calling Area on the private network.
Figure 1-3 System Outline of Multi-Site Roaming
PBX APBX B
ZTZT
PS PSROA MING
When a PS roams over the adjoining PBX’s Calling Area
When...

Page 20

NEAX2000 IVS2WCS System Manual (PCS)Page 12ND-70920 (E), Issue 1.0
CHAPTER 1 GENERAL INFORMATION
Outline of Multi-Site Roaming
System Configuration
Figure 1-4shows the system configuration for Multi-Site Roaming.
Figure 1-4 System Configuration of Multi-Site Roaming
HOME PBX
CSI
DBM
PLO
DTI
CSH
DCH
ZT
V IRTUAL
LC
V IRTUAL
TRK
V IRTUAL
LC
V IRTUAL
TRK
PUBLIC
NETWORK
PS
PS
TRK
VISITOR PBX
CSI
DBM
PLO
DTI
CSH
DCH
ZT
VIRTUAL
LC
VIRTUAL
TRK
VIRTUAL
LC
VIRTUAL
TRK
TRK
PS
PS Dp Channel Private Line
(JT-Q931-a)...
Start reading NEC Neax 2000 Ivs2 Wcs System Manual

Related Manuals for NEC Neax 2000 Ivs2 Wcs System Manual

All NEC manuals