NEC Neax 2000 Ivs2 General Description Manual
Have a look at the manual NEC Neax 2000 Ivs2 General Description Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 2 System Configuration Layout of PIM (SN1480 PIMF) NEAX2000 IVS2 General Description NDA-24293, Issue 2 Page 17 Layout of PIM (SN1480 PIMF) The NEAX2000 IVS2 consists of Port Interface Modules (PIMs) which contain lines, trunks, interfaces, switching circuitry, control processors and power equipment. The following diagrams show the physical layout of elements within the PIM. LT00-LT11: Line/Trunk card mounting slots System Capacity for Line/Trunk Card Max. 64 ports per PIM Max. 512 ports per systemVM: PZ-VM00-M mounting slot AP00-AP11: Application Processor card mounting slots System Capacity for Application Processor Card Max. 24 cards per system Max. 256 ports per systemPFT: PZ-8PFTB mounting slot MP: PN-CP14 mounting slot AC/DC PWR: PZ-PW121 mounting slot FP: PN-CP15 mounting slots DC/DC PWR: PZ PW122 mounting slot
NEAX2000 IVS2 General Description Page 18NDA-24293, Issue 2 Control Card Mounting Conditions Chapter 2 System Configuration Control Card Mounting Conditions 1. PN-CP14 (MP) Mount the PN-CP14 card in the MP slot (Slot 12) of PIM0. 2. PN-CP15 (FP) When the system is configured with three PIMs or more, mount one PN-CP15 card in the FP slot, PIM 0: Slot 11 and PIM 2, 4, 6: Slot 12. When the system is configured with one or two PIMs, the PN-CP15 card does not need to be mounted. Figure 2-4 MP/FP Card Mounting Slots PIM 3 PIM 2 PIM 1 PIM 0 PIM 7 PIM 6 PIM 5 PIM 4
NEAX2000 IVS2 General Description NDA-24293, Issue 2 Page 19 Chapter 3 Terminals The NEAX2000 IVS2 can accommodate both Dterm Series III and Dterm Series E terminals to provide a variety of desktop solutions. In addition to the Dterm Series III/E terminals, the SN716 DESKCON is used for the Attendant Answering Position. Dterm Series III The Dterm Series III terminals are intelligent, microprocessor-controlled, multi-function telephones that enhance the feature capabilities offered by the system. They provide access to sophisticated features, beyond those of conventional key telephones, over one-pair wiring. Advantages of Dterm Series III In physical operation, as well as functionally, the Dterm Series III terminals assure effortless, comfortable handling. Call Indicator Lamp When a call comes in, a small but highly visible light on the corner of the terminal flashes. Because the light can be seen from every direction, it helps assure that the user wont miss important calls. Electronic Volume Control A single set of control keys for adjusting LCD contrast, speaker/receiver volume, and ringer volume is located on the front panel of the terminal. These universal keys increase operational efficiency and eliminate the need to have a number of different volume control keys. Tilt-Up Legs The terminal adjusts to the users operating environment. Information on the LCD screen is easy to see, and key operations are more comfortable. Programmable Line Keys and Dedicated Feature Keys D term Series III terminals offer 8- or 16-line keys with dual-color LEDs for line status indication. Line keys are flexible for line, trunk or feature access. This flex- ibility allows the terminal to fit the users individual needs. Call screening func- tions between executives and secretaries, call pickup to another station, message waiting indication of voice mail and fax arrival indication can all be programmed on the line keys of the terminal.
NEAX2000 IVS2 General Description Page 20NDA-24293, Issue 2 Dter m Series IIIChapter 3 Terminals 40-Character Display For better call handling, the Dterm Series III terminals with 16 line keys feature an easy-to-read, 20-character, 2-line LCD screen. The LCD screen provides informa- tion on calling number with name, call back message, return schedule messages, dialed digit information, service feature indications, called station status, and elapsed call time. Hands-free Operation D term Series III terminals offer hands-free operation as a standard feature. The built-in microphone and speaker let users keep their hands available for work while speaking on the phone. Dedicated Feature Keys ANSWER: Answers any incoming ringing call CONFERENCE: Simplifies access to Three-way Calling DOWN/UP: Controls speaker/handset volume, display contrast, ringer volume FUNCTION: Provides special functions (ex; MIC-ON/OFF, COT gain control) HOLD: Provides Exclusive and Non-Exclusive Hold of line appearances LAST NUMBER REDIAL/SPEED CALLING-STATION: Provides for Stack Dial or Speed Calling-Station RECALL: Terminates a call in progress and immediately seizes dial tone (Line Reconnect – Same Line) SPEAKER: Controls the built-in speaker which can be used for Hands-free Dial- ing/Monitoring and Voice Call TRANSFER: Facilitates Call Transfer, Consultation Hold and Call Splitting Dterm Series III Accessories DSS/BLF Console The Dterm Series III can be equipped with a DSS/BLF Console. This provides 48 Direct Station Selection keys which allow the user to call another station with one touch key operation. Also, it shows the busy status of the stations assigned on each DSS key by LED lamp indication. The DSS/BLF Console requires an extra interface to the PABX and an AC-DC Adapter.
Chapter 3 TerminalsDterm Series III NEAX2000 IVS2 General Description NDA-24293, Issue 2 Page 21 Data Adapter For the data user, Dterm III terminals can be used to transmit digital information at speeds up to 19.2 kbps (asynchronous or synchronous) by adding the Data Adapter. Long Line Adapter The Long Line Adapter provides a cable length (max. 4000 feet/1200 m) between the Main System and a D term III terminal. Wall Mount Unit The Wall Mount Unit allows a D term III to be conveniently mounted vertically when desk space is not available. Ancillary Devices Adapter The Ancillary Devices Adapter provides D term III terminals with a connection for a head set or External Hands-free Unit or provides a recording jack. Analog Port Adapter The Analog Port Adapter provides a D term III terminal with a connection for a PC with a modem. Analog Port Adapter with Ringing The Analog Port Adapter with Ringing provides D term III terminals with a con- nection for a facsimile, cordless telephone, etc. The Dterm Series III family of ter- minals is shown following. These multiline Digital Terminals are available in soft white (SW) or in black. Dterm Series III TerminalsThe following illustrations show the features and accessories of the Dterm systems. Figure 3-1 Dterm S IIID SLT (ETJ-1DT-1) - Single Line Digital Instrument 2 dedicated functions keys 8 additional programmable feature keys call/message indicator
NEAX2000 IVS2 General Description Page 22NDA-24293, Issue 2 Dter m Series IIIChapter 3 Terminals Figure 3-2 Dterm 8 (ETJ-8-1) - 8 Button Digital Instrument without LCD Display Figure 3-3 D term 8IS (ETJ-8IS-1) Figure 3-4 D term 16DC (ETJ-16DC-1) 8 dedicated function keys hands-free operation call/message indicator tilt leg 8 dedicated function keys 8 line/feature access keys 40 character, 2 lines LCD display call/message indicator tilt leg 8 dedicated function keys 16 line/feature access keys 40 character, 2 lines LCD display hands-free operation call/message indicator tilt leg
Chapter 3 TerminalsDterm Series III NEAX2000 IVS2 General Description NDA-24293, Issue 2 Page 23 Figure 3-5 Dterm 16DD (ETJ-16DD-I) Figure 3-6 D term 24DS (ETJ-24DS-1) Figure 3-7 D term Series IIIA (ETJ-1-1) - Single Line Analog Telephone 8 dedicated function keys 16 line/feature access keys 40 character, 2 lines LCD display 20 additional programmable feature keys hands-free operation call/message indicator tilt leg 8 dedicated function keys 24 line/feature access keys 40 character, 2 lines LCD display 12 additional programmable feature keys hands-free operation call/message indicator tilt leg 2 dedicated function keys call/message indicator
NEAX2000 IVS2 General Description Page 24NDA-24293, Issue 2 Dter m Series IIIChapter 3 Terminals Figure 3-8 Dterm Series IIIH (ETJ-1HM) - Single Line Analog Telephone with 8 Speed Dial Keys Figure 3-9 EDW-48-2 DSS/BLF Figure 3-10 Typical D term III Adapters - ADA-J, APA-J, APR-J, LLA-J and CTA-J 2 dedicated function keys 8 additional programmable feature keys call/message indicator 48/60 Direct Station Selector/Busy Lamp Field Add-On Module for D term Series III
Chapter 3 TerminalsDterm Series III NEAX2000 IVS2 General Description NDA-24293, Issue 2 Page 25 Line Conditions of Each Dterm Series III Terminal The cable length between the DLC card and terminal varies depending on the type of terminal. This table shows the line conditions of each Dterm and DSS/BLF Console. *The value in brackets [ ] shows the cable length when local power is supplied. Note 1:When using PN-8DLCL or PN-8DLCP card, the long-line function is not available, even if Dterm is equipped with Long Line Adapter. Note 2:The DSS/BLF Console requires local AC/DC power supply. Table 3-1 Line Conditions of Each Dterm Series III Terminal TERMINAL TYPE CARD TYPECABLE LENGTH* (CABLE 0.5φ φφ φ/24 AWG)REMARKS Dterm Series III (8 button)PN-8DLCL/8DLCP (STANDARD)984 ft. (300 m)Note 1PN-4DLCM/4DLCQ (STANDARD)984 ft. (300 m) [3937 ft. (1200 m)] PN-2DLCB/2DLCN (LONG)2788 ft. (850 m) [3937 ft. (1200 m)] D term Series III (16 button)PN-8DLCL/8DLCP (STANDARD)492 ft. (150 m)Note 1PN-4DLCM/4DLCQ (STANDARD)492 ft. (150 m) [3937 ft. (1200 m)] PN-2DLCB/2DLCN (LONG)2788 ft. (850 m) [3937 ft. (1200 m)] D term Series III (24 button)PN-8DLCL/8DLCP (STANDARD)492 ft. (150 m)Note 1PN-4DLCM/4DLCQ (STANDARD)492 ft. (150 m) [3937 ft. (1200 m)] PN-2DLCB/2DLCN (LONG)2788 ft. (850 m) [3937 ft. (1200 m)] DSS/BLF Console Note 2 PN-8DLCL/8DLCP (STANDARD)984 ft. (300 m) Note 1PN-4DLCM/4DLCQ (STANDARD)984 ft. (300 m) PN-2DLCB/2DLCN (LONG)2788 ft. (850 m)
NEAX2000 IVS2 General Description Page 26NDA-24293, Issue 2 Dter m Series EChapter 3 Terminals Dterm Series E The Dterm Series E line of telephone terminals is strategically designed to provide ergonomically form and user-friendly functions. With advanced digital circuitry, the D term Series E terminals consist of six distinct models to meet users diverse telephone terminal needs. The new Dterm Series E family of terminals offers adjustable display and non-display units with menu-driven soft key operation, allowing users to program terminals at the desktop. The display units are equipped with large LCD panels, which can carry 24 characters via three lines of display. Each terminal offers full duplex speaker phone operation for two-way conversation. Standard features include headset jacks, wall mount units and adjustable base units. Features Built-in LLA function Four Local Soft Key Controls (Detail functions are depending on PBX.) Large Message Waiting LED 24 Character, 3 line LCD Tilt & Detachable LCD Unit Adjustable legs Built-in Wall Mount Unit Built-in Headset Jack connector Speed Dial/DSS Buttons Programmable Line Keys with 2 color LED Eight dedicated function keys (Feature, Recall, Conf, Redial, Hold, Transfer, Answer, & Speaker) Built-in Half Duplex Handsfree unit Optional: Full Duplex HFU (consist of HFU-U Unit, External Microphone Unit and AC adapter) Snap-in Options available: Ancillary Device Adapter (ADA-U) Analog Port Adapter (APA-U) Analog Port Adapter with Ringing (APR-U) External Wallmount Unit (WMU-U) AC Adapter Unit (ACA-U) CTI Adapter (CTA-U) External Handsfree Unit, includes an External Microphone (HFU-U) Directory Designation Card Holder (DCU-U)