NEC Neax 2000 Ivs2 General Description Manual
Have a look at the manual NEC Neax 2000 Ivs2 General Description Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NEAX2000 IVS2 General Description NDA-24293, Issue 2 Page ix TABLE OF CONTENTS (CONTINUED) Pag e Chapter 7 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Trouble Reporting and Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 System Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Remote Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Chapter 8 System Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Transmission Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Rotary Dial Pulse and DTMF Signaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Audible Tones and Ringing Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Audible Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Ringing Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Built-In Modem on MP Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 BHCA (Busy Hour Call Attempts) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
LIST OF FIGURES Figure TitlePag e NEAX2000 IVS2 General Description Page xNDA-24293, Issue 2 Figure 2-1 Floor Standing Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Figure 2-2 Wall-Mounting Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Figure 2-3 Rack Mounting Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Figure 2-4 MP/FP Card Mounting Slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Figure 3-1 D term S IIID SLT (ETJ-1DT-1) - Single Line Digital Instrument . . . . . . . . . . . . . . . . . . 21 Figure 3-2 Dterm 8 (ETJ-8-1) - 8 Button Digital Instrument without LCD Display . . . . . . . . . . . . . . 22 Figure 3-3 Dterm 8IS (ETJ-8IS-1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Figure 3-4 Dterm 16DC (ETJ-16DC-1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Figure 3-5 Dterm 16DD (ETJ-16DD-I) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Figure 3-6 Dterm 24DS (ETJ-24DS-1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Figure 3-7 Dterm Series IIIA (ETJ-1-1) - Single Line Analog Telephone . . . . . . . . . . . . . . . . . . . . 23 Figure 3-8 Dterm Series IIIH (ETJ-1HM) - Single Line Analog Telephone with 8 Speed Dial Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Figure 3-9 EDW-48-2 DSS/BLF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Figure 3-10 Typical D term III Adapters - ADA-J, APA-J, APR-J, LLA-J and CTA-J . . . . . . . . . . . . . 24 Figure 3-11 DTP-8-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Figure 3-12 DTP-8D-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Figure 3-13 DTP-16D-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Figure 3-14 DTP-32D-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Figure 3-15 DTP-2DT-1 (WH) TEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Figure 3-16 DCU-60-1 Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Figure 3-17 SN716 DESKCON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
LIST OF TABLES Table TitlePag e NEAX2000 IVS2 General Description NDA-24293, Issue 2 Page xi Table 3-1 Line Conditions of Each Dterm Series III Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Table 3-2 Line Conditions of Each Dterm Series Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Table 3-3 Line Conditions of the SN716 DESKCON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Table 6-1 Specifications for Heat Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Table 7-1 Fault Detection Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Table 8-1 Specifications of Audible Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
NEAX2000 IVS2 General Description Page xiiNDA-24293, Issue 2 This page is for your notes.
NEAX2000 IVS2 General Description NDA-24293, Issue 2 Page xiii Regulatory Information Regulatory Requirements The Federal Communications Commission (FCC) has established rules that permit the PBX to be directly connected to the telephone network. A jack is provided on party lines or coin lines. The telephone company may make changes in its technical operations and procedures. If such changes affect the compatibility or use of the PBX, the telephone company must provide adequate notice of the changes. This equipment complies with the requirements in Part 15 of FCC Rules for a Class A computing device. Operation of this equipment in a residential area may cause unacceptable interference to radio and TV reception requiring the operator to take whatever steps are necessary to correct this interference. FCC Part 15 Requirements In compliance with FCC Part 15 Rules, the following statement is provided: Warning : Th is equ ipme nt gen era tes, us es, and can rad ia te rad io freq uen cy ener gy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference.
NEAX2000 IVS2 General Description Page xivNDA-24293, Issue 2 FCC Par t 68 Registration Regulatory Information FCC Part 68 Registration Company NotificationBefore installing the PBX to the telephone network, the telephone company must be provided with the following: • Your telephone number The FCC registration numbers: The Ringer Equivalence Number is 1.6B; the required USOC jacks are RJ21X, RJ2EX, RJ2GX, and RJ49C. Note:Limitations on features exist if the system is registered as a KF system. Refer to Features and Specifications for details. Service RequirementsIn the event of equipment malfunction, all repairs will be performed by NEC or an authorized distributor. It is the responsibility of users requiring service to report the need for service to NEC or to one of their authorized distributors. If trouble is experienced with this equipment, please contact NEC America, Inc., at 800-TEAM NEC (800-832-6632) for repair and/or warranty information. If the trouble is causing harm to the telephone network, the telephone company may request that you remove the equipment from the network until the problem is resolved. If the equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations, or procedures that affect the operation of the equipment. If this happens, the telephone company will provide advance notice so that you can make necessary modifications in order to maintain uninterrupted service. NO REPAIRS CAN BE DONE BY THE CUSTOMER. JAPAN USA PBX AY5JPN-20542-PF-E AY5USA-21582-PF-E Hybrid AY5JPN-20543-MF-E AY5USA-21583-MF-E Key System AY5JPN-20586-KF-E AY5USA-21584-KF-E
Regulatory Information Location of FCC Compliance Labels NEAX2000 IVS2 General Description NDA-24293, Issue 2 Page xv Location of FCC Compliance Labels Labels stating the NEAX2000 IVS2 FCC registration number and compliance with FCC Parts 15 and 68 are attached on the inside of the systems front cover. Label examples are as follows: FCC Requirements for Private Line OperationsIn order to connect this system to the private line network, provide the telephone company with: The quantities and USOC numbers of the required jacks (See the following table.) The sequence in which the trunks are to be connected The facility interface codes by position The Ringer Equivalence Number or service order code, as applicable, by position“This equipment complies with the requirements in Part 15 of FCC Rules for a Class A computing device. Operation of this equipment in a residential area may cause unacceptable interference to radio and TV reception requiring the operator to take whatever steps are necessary to correct the interference.”NEAX2000 IVS 2 Complies With Part 68 FCC Rules FCC Registration Numbers: Ringer Equivalence: 1.6B NEC America, Inc. MADE IN USA MFGS PORT IDFACILITY INTERFACE CODE NETWORK JACKSSERVICE ORDER CODE PN-4COTB 02LS2 RJ21X PN-4COTB 02GS2 RJ21X PN-4COTG 02LS2 RJ21X PN-4COTG 02ES2 RJ21X PN-AUCA 02RV2-T RJ21X PN-4DITB 02RV2-T RJ21X PZ-8PFTA 02LS2 RJ21X PN-8COTQ 02LS2 RJ21X PN-8COTS 02LS2 RJ21X PN-8COTS 02GS2 RJ21X PN-AUCA 0L13A, 0L13B, 0L13C RJ21X 9.0F PN-20DTA TL11M RJ2EX 9.0F PN-20DTA TL31M RJ2GX 9.0F PN-24DTA 04DU9-BN N/A 6.0P PN-24DTA 04DU9-DN N/A 6.0P PN-24DTA 04DU9-1KN N/A 6.0P PN-24DTA 04DU9-ISN N/A 6.0P
NEAX2000 IVS2 General Description Page xviNDA-24293, Issue 2 Location of FCC Compliance Labels Regulatory Information PN-24DTA 04DU9-IZN N/A 6.0P PN-BRTA 02IS5 RJ49C 6.0Y PN-DAIA 04DU9-BN N/A 6.0N PN-DAIA 04DU9-DN N/A 6.0N PN-DAIA 04DU9-1KN N/A 6.0N PN-DAIA 04DU9-1SN N/A 6.0N PN-DAIA 04DU9-1ZN N/A 6.0N PN-DAIA 04DU9-BN N/A 6.0N PN-DAIB 04DU9-BN N/A 6.0N PN-DAIB 04DU9-DN N/A 6.0N PN-DAIB 04DU9-1KN N/A 6.0N PN-DAIB 04DU9-1SN N/A 6.0N PN-DAIB 04DU9-1ZN N/A 6.0N PN-24PRT-A 05DU9-BN N/A 6.0P PN-24PRT-A 04DU9-BN N/A 6.0P PN-24PRT-A 04DU9-1KN N/A 6.0P PN-24PRT-A 04DU9-1SN N/A 6.0P PN-24PRT-A 04DU9-1ZN N/A 6.0P PN-24CCT-A 04DU9-BN N/A 6.0P PN-24CCT-A 04DU9-DN N/A 6.0P PN-24CCT-A 04DU9-1KN N/A 6.0P PN-24CCT-A 04DU9-1SN N/A 6.0P PN-24CCT-A 04DU9-1ZN N/A 6.0P PN-24DTA-C 04DU9-BN N/A 6.0P PN-24DTA-C 04DU9-DN N/A 6.0P PN-24DTA-C 04DU9-1KN N/A 6.0P PN-24DTA-C 04DU9-1SN N/A 6.0P PN-24DTA-C 04DU9-1ZN N/A 6.0P PN-2BRTC 02IS5 N/A 6.0Y MFGS PORT IDFACILITY INTERFACE CODE NETWORK JACKSSERVICE ORDER CODE
Regulatory Information Direct-Inward Dialing (DID) Calls NEAX2000 IVS2 General Description NDA-24293, Issue 2 Page xvii Direct-Inward Dialing (DID) Calls Allowing this equipment to be operated in s uch a manner as to not provide for proper answer supervision is a violation of Part 68 of the FCCs rules. PROPER ANSWER SUPERVISION IS WHEN: a.) This equipment returns answer supervision to the PSTN when DID calls are: Answered by the called station Answered by the attendant Routed to a recorded announcement that can be administered by the CPE user Routed to a dial prompt b.) This equipment returns answer supervision on all DID calls forwarded to the PSTN. Permissible exceptions are: A call is unanswered A busy tone is received A reorder tone is received EQUAL ACCESS REQUIREMENTS This equipment is capable of providing users access to interstate providers of operator services through the use of access codes. Modification of this equipment by call aggregators to block access dialing codes is a violation of the Telephone Operator Consumers Act of 1990. C aution : The u se of a mo nitor ing, re co rdi ng or li s te ni ng d ev ices to eav esd rop, monitor or record telephone conversations or other sound activities, whether or not contemporaneous with its transmission, may be illegal in certain circumstances under federal or state laws. Legal advice should be sought prior to implementing any practice that monitors or records any telephone conversation. Some federal and state laws require some form of notification to all parties to the telephone conversation, such as using a beep tone or other notification methods or require the consent of all parties to the telephone conversation, prior to monitoring or recording a telephone conversation. Some of these laws incorporate strict penalties.
NEAX2000 IVS2 General Description Page xviiiNDA-24293, Issue 2 Regulatory Information On Single-line Analog Telephones Regulatory Information Regulatory Information On Single-line Analog Telephones NEC single-line telephones comply with Part 68 of FCC Rules. On the bottom of the equipment is a label that states, among other information, the FCC registration number and ringer equivalence number (REN) for the equipment. If requested, this information should be provided to the telephone company. The equipment uses the following USOC jacks: RJ11C. The equipment should be used only behind a PBX or KTS. The REN is used to determine the number of devices that may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all, areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to the line as determined by the total RENs, contact the telephone company to determine the maximum REN for the calling area. Hearing Aid Compatibility The Dterm terminals provided for the NEAX2000 IVS2 are hearing aid compatible. FCC rules prohibit the use of non-hearing aid compatible telephones. NEC-type single-line telephone sets used in conjunction with the NEAX2000 IVS 2 are hearing aid compatible. If other than NEC-type single-line telephone sets are to be used with this system, ensure that these are hearing aid compatible. Industry Canada CS-03 Certification number: 140 5976 A Load Number of the equipment: 1.0 NOTICE: The Industry Canada label identifies certified equipment. The certification means that the equipment meets certain telecommunications network protective operational and safety requirements. The department does not guarantee the equipment will operate to the users satisfaction.