NEC Medical Center System Operations Manual

NDA-30026   Revision 6Page 29
Medical Center System Operations Manual - JAVA Edition SERVER INSTALLATION
Step 7: Java 
Services 
Primary 
ConfigurationThe APM configuration parameters are automatically set during the Java MCMP 
Server installation. Some of the user-defined parameters may need to be modified to 
reflect the installation site’s configuration.
User-Defined Parameters
Parameter Entry
OAI Application N
CRT Application N
Communication Queue N
Application Name JmcmpConnServer
Executable...

SERVER INSTALLATION Medical Center System Operations Manual - JAVA Edition
Page 30NDA-30026   Revision 6
Step 8: 
Mcs_Dbclean 
Control 
OptionsFrom the APM Administration Menu, select Control Options. When the Control 
Options screen displays, select the Applications command. Then, select Mcs
_Dbclean 
and set up the schedule for its execution, as illustrated in the following example:
Initialize:
Minute (0-59): 1
Hour of Day (0-23): 0
Day of Month (1-31): *
Month of Year (1-12): *
Day of Week (0-6): *...

SERVER INSTALLATION Medical Center System Operations Manual - JAVA Edition
Page 31NDA-30026   Revision 6
This completes the configuration of MCS in the APM. Now go to the Database 
Requirements on page 32 to prepare its database support. 

SERVER INSTALLATION Medical Center System Operations Manual - JAVA Edition
Page 32NDA-30026   Revision 6
Database Requirements
MCS requires two APM databases that were installed with default values when the 
software was loaded from the release media. Only one (mcscfg) can be modified. The 
other database (mcsfile) should not be changed at all without first consulting technical 
support. You can change the mcscfg database through the Database Administration 
option on the APM System Administration Menu....

SERVER INSTALLATION Medical Center System Operations Manual - JAVA Edition
Page 33NDA-30026   Revision 6
Park Abandon Timeout = 1800
The amount of time that park records remain in the MCS database after the party 
has been recalled or released. This time period is also measured in seconds and is 
checked in the same way as the Park Call Timeout.
Recall Timeout = 90
This value is used by MCS to determine if a call answered by an attendant has been 
recalled by the PBX. This value should be adjusted...

SERVER INSTALLATION Medical Center System Operations Manual - JAVA Edition
Page 34NDA-30026   Revision 6
MAT Assignments
This guide assumes that data settings that affect the operation of all OAI software on a 
system-wide basis have already been assigned on the NEAX Maintenance 
Administration Terminal (MAT). Such settings include system index values and 
assignment of Interface I/O Port Data in the Interface Processor (IP). For more 
information about these system data settings and the MAT commands...

SERVER INSTALLATION Medical Center System Operations Manual - JAVA Edition
Page 35NDA-30026   Revision 6
Attendant Station Preparation
To Configure 
Attendant 
StationsFrom one of the configured terminals, log into the MCS by entering the login name mcs 
at the SCO UNIX login prompt and press Enter. The following screen displays from 
which you can enter the MCS Main Menu:
Figure 2-17   MCS Login Screen
Press  for the position data. The following error prompt will display at the 
bottom of the screen:...

SERVER INSTALLATION Medical Center System Operations Manual - JAVA Edition
Page 36NDA-30026   Revision 6
This Page Left Blank. 

NDA-30026   Revision 6Page 37
Medical Center System Operations Manual - JAVA Edition JAVA MCS CLIENT INSTALLATION
Chapter 3 JAVA MCS CLIENT INSTALLATION
Overview
This chapter provides step-by-step procedures to install and configure the JAVA 
MCS Client application. Descriptions and step-by-step instructions are found in the 
following sections of this chapter: 
The JAVA MCS Client software can be installed on the workstations used by 
JAVA MCS agents to assist them in processing calls. This element can...

Page 38NDA-30026   Revision 6
JAVA MCS CLIENT INSTALLATION Medical Center System Operations Manual - JAVA Edition
2. Select Download Java1.2.2 Runtime Environment from the “Getting Help” 
section to install the Java Runtime Environment on your workstation. Follow 
the prompt to install the Java Runtime Environment. Run the program from its 
current location, then select Ye s. After the Java Runtime Environment 
installation is complete, the NEC UNIX OAI Applications Installation Page 
(Figure 3-1) is...