NEC Medical Center System Operations Manual

NDA-30026   Revision 6Page 9
Medical Center System Operations Manual - JAVA Edition SERVER INSTALLATION
Chapter 2 SERVER INSTALLATION
Introduction
This chapter provides a step-by-step description of the installation and setup of 
Medical Center System (MCS). The following steps must be taken before MCS can 
be installed:
1. The OAI/APM system must be installed on the SCO UNIX system. 
2. The Informix Dynamic Server (IDS) Workgroup Edition Version 7.30 must be 
installed on the SCO UNIX system.
Note:A...

Page 10NDA-30026   Revision 6
SERVER INSTALLATION Medical Center System Operations Manual - JAVA Edition
7.Extension Installation 
After the installation is performed as outlined in Steps 1 through 6, the extensions 
must be added to the Informix database. Each extension is assigned through the 
Extension Maintenance option, entered from the System Administration option on 
the MCS Main Menu.
Note:In some cases, sequence is important in the assignment process. We recommend a re-
view of Chapter 7,...

NDA-30026   Revision 6Page 11
Medical Center System Operations Manual - JAVA Edition SERVER INSTALLATION
Hardware Installation
The hardware configuration of each attendant station determines the software 
characteristics for the attendant configuration in JAVA MCS. Each MCS attendant 
station consists of an NEC Advanced Attendant Console and a PC Workstation, and 
each is identified by the following unique characteristics: 
Attendant ID:  An attendant console equipment number for each particular station...

Page 12NDA-30026   Revision 6
SERVER INSTALLATION Medical Center System Operations Manual - JAVA Edition
Software Installation
This section discusses the installation of MCS software from the release media and 
describes the required MCS software configurations. Before beginning this section, be 
sure to install the UNIX operating system, including the raw partition required for 
Informix, and the Applications Manager platform. Refer to the instructions provided 
with each of these software packages for...

NDA-30026   Revision 6Page 13
Medical Center System Operations Manual - JAVA Edition SERVER INSTALLATION
Step 2: MCS 
Login NamesThe mcs and mcsadm login names are installed with the same user ID. (The default is 
4001.) Any change in the user ID value must be made for both login names, since they 
both use the same user ID value. Press Enter at each user ID prompt to accept the 
default value. A warning message displays when the 4001 user is being installed. Type 
‘y’ and press Enter at the warning...

Page 14NDA-30026   Revision 6
SERVER INSTALLATION Medical Center System Operations Manual - JAVA Edition
Step 4: Informix 
Database 
InstallationThe figure below shows a normal execution of the Informix setup and includes the 
required input for each prompt. Type y and press Enter if this is the first time this 
installation is being performed. 
The informix user must not have a password, as described in the APM Informix 
Installation section. If the informix user does have a password, this step will...

NDA-30026   Revision 6Page 15
Medical Center System Operations Manual - JAVA Edition SERVER INSTALLATION
Step 5: Jmcmp 
Server 
Software 
Installation 
(Cont)However, if a previous version is detected, an option is given to either upgrade (leaving 
configured data alone), overwrite (completely overwrite all Jmcmp data), or abort the 
installation. Enter ‘u’, ‘o’, or ‘a’ to upgrade, overwrite, or abort the installation and 
then press Enter.
Figure 2-6   Jmcmp Pre-Install - Install Options
If the upgrade...

Page 16NDA-30026   Revision 6
SERVER INSTALLATION Medical Center System Operations Manual - JAVA Edition
Step 5: Jmcmp 
Server 
Software 
Installation 
(Cont)JMCMP Install
After the Pre-Install phase of installation, the following is displayed: 
Figure 2-9   Jmcmp Installation - Access to Data
Enter the root password and press Enter to allow proper access to configuration data. 
If this is a first install of Jmcmp Server, the following is displayed: 
Figure 2-10   Jmcmp Installation - Initial...

NDA-30026   Revision 6Page 17
Medical Center System Operations Manual - JAVA Edition SERVER INSTALLATION
Step 5: Jmcmp 
Server 
Software 
Installation 
(Cont)If overwrite the existing installation is selected, the following is displayed: 
Figure 2-12   Jmcmp Installation - Overwrite Installation
This installs the new applications, plus sets all configuration data to default values. If 
the Jmcmp Server was previously installed, the APM application “JmcmpConnServer” 
may already be configured. If so, the...

Page 18NDA-30026   Revision 6
SERVER INSTALLATION Medical Center System Operations Manual - JAVA Edition
Step 5: Jmcmp 
Server 
Software 
Installation 
(Cont)Entering ‘y’ and pressing Enter starts up the ‘vi’ editor, allowing modifications to the 
User Address Mapping File:
Figure 2-15   Allowable Client Connections Configuration File
For each client position, enter the hostname, IP address, or MAC address of the client 
machine. When the installation is complete, the following is displayed: 
Figure 2-16...