NEC Medical Center System Operations Manual

NDA-30026   Revision 6Page 19
Medical Center System Operations Manual - JAVA Edition SERVER INSTALLATION
Application Configuration
MCS is internally supported by the APM and must be configured in the APM 
environment. 
MCS uses an autoconfiguration utility program to automatically configure some MCS 
settings for the APM platform. This program utility runs upon installation. If the utility 
runs successfully, specific adjustments can be made to the application parameters, 
depending on site...

Page 20NDA-30026   Revision 6
SERVER INSTALLATION Medical Center System Operations Manual - JAVA Edition
Cleaner–Periodically cleans out any records of patients that have been 
discharged. It also makes available DID numbers that have been 
offered but not assigned to an admitted patient after a set amount 
of time. You must schedule this component under Control Options 
on the APM Operations Menu in order for it to function 
automatically.
Java Services–Controls the Java graphical user interface between...

NDA-30026   Revision 6Page 21
Medical Center System Operations Manual - JAVA Edition SERVER INSTALLATION
Step 2: Monitor 
ConfigurationPrimary Configuration Parameters
On the APM Configuration Entry screen, make entries for each parameter shown 
below. The application name for the server is a derivation of the name configured in 
the Server Base Name field of the mcscfg database. For parameters shown with an 
asterisk (*) in the table below, make the entries exactly as shown. The other parameter 
entries...

Page 22NDA-30026   Revision 6
SERVER INSTALLATION Medical Center System Operations Manual - JAVA Edition
Step 2: Monitor 
Configuration 
(Cont)OAI Configuration
Use the OAI-Conf command on the APM Configuration Entry screen to make the 
necessary parameter entries. For parameters shown with an asterisk (*) in the table 
below, make entries exactly as shown. The other parameters are shown with sample 
entries that may be changed to meet site requirements. Use the instructions provided 
for this option in...

NDA-30026   Revision 6Page 23
Medical Center System Operations Manual - JAVA Edition SERVER INSTALLATION
Step 2: Monitor 
Configuration 
(Cont)User-Defined Parameters
Make the additional parameter entries exactly as shown below through the 
UserDefined command on the OAI Configuration screen.
User Defined # Entry Description
1
5Number of seconds to wait for a response 
from an attendant console before assuming 
that communication with it is not working.
2
600Number of seconds between handshakes 
between...

Page 24NDA-30026   Revision 6
SERVER INSTALLATION Medical Center System Operations Manual - JAVA Edition
Step 3: Server 
ConfigurationPrimary Configuration Parameters
On the APM Configuration Entry screen, make entries for each parameter shown 
below. The application name for the server is a derivation of the name configured in 
the Server Base Name field of the mcscfg database. For parameters shown with an 
asterisk (*) in the table below, make the entries exactly as shown. The other parameters 
are...

NDA-30026   Revision 6Page 25
Medical Center System Operations Manual - JAVA Edition SERVER INSTALLATION
Step 3: Server 
Configuration 
(Cont)OAI Configuration
Use the OAI-Conf command on the APM Configuration Entry screen to make the 
necessary parameter entries. For parameters shown with an asterisk (*) in the table 
below, make entries exactly as shown. The other parameters are shown with sample 
entries that may be changed to meet site requirements. Use the instructions provided 
for this option in...

Page 26NDA-30026   Revision 6
SERVER INSTALLATION Medical Center System Operations Manual - JAVA Edition
Step 3: Server 
Configuration 
(Cont)User-Defined Parameters
Make the additional parameter entries exactly as shown below through the 
UserDefined command on the OAI Configuration screen. 
User Defined # Entry Description
1 Dictation trunk number for conversation 
monitoring. If no dictation trunk is to be 
used, leave this field blank.
2Mcs
_Monitor Monitor component logical name.
3 
10Call kind...

NDA-30026   Revision 6Page 27
Medical Center System Operations Manual - JAVA Edition SERVER INSTALLATION
Step 4: 
Recluster 
Primary 
ConfigurationOn the APM Configuration Entry screen, make entries for each parameter shown 
below. The application name for the server is a derivation of the name configured in 
the Server Base Name field of the mcscfg database. For parameters shown with an 
asterisk (*) in the table below, make the entries exactly as shown. The other parameters 
are shown with sample...

Page 28NDA-30026   Revision 6
SERVER INSTALLATION Medical Center System Operations Manual - JAVA Edition
Step 6: Cleaner 
Primary 
ConfigurationOn the APM Configuration Entry screen, make entries for each parameter shown 
below. The application name for the server is a derivation of the name configured in 
the Server Base Name field of the mcscfg database. For parameters shown with an 
asterisk (*) in the table below, make the entries exactly as shown. The other parameters 
are shown with sample entries...