NEC Itl12d1 User Guide

 203 
MENU LIST FOR DT330 Series
Menu List For   Call History
Menu Item
Description
Menu Press
  key
 while indicating the current time on LCD.
 Call HistoryTo view call history data.
 Directory To access Phonebook feature. For details, see 
PHONEBOOK
 in chapter 
5.
 Settings To make the user setting of DT Series. 
Menu Item
Description
Default Value
1 Call History
1 Incoming Displays the hisotry of incoming calls. The user can  also make a call from this menu. -
3 Outgoing Displays the hisotry of...

 204 
Menu List For   Settings
Menu Item
Description
Default Value
3 Settings 1 Ring Volume Adjust the ringer tone volume. Level 7
2 Off Hook Ring Enable/disable Off-hook ringing. Enable
3 Back Light Enable/disable the backlights of LCD and digit keys. Enable
4 Headset Enable/disable the ringing of headset. Disable
5 Peripherals Not used. -
3  

 205 
10.
O
NLINE 
M
ONITORING
In Online Monitoring, users can see the following infor-
mation on the terminal LCD.
- QoS information (RTP Packet Loss (per 5 sec.),
Payload, CODEC) 
- System information
-Ping• Conditions for activating Online Moni- toring Menu- Press and hold  Help key. Main screen of Online
Monitoring will be displayed. 
- To exit from Online Monitoring, press  Exit key.
- When just pressing  Help key, Help information will
be displayed.
• Key operation chart
Exit
1.QoS
2.Sytem...

 206 
• QoS information (RTP Packet Loss (per 5 sec.), Payloa d, CODEC) Press 1 in main screen, and move to QoS information 
menu.
Following information can  be confirmed in QoS infor-
mation.
 - Lost Packet
The number of RTP packet receiving loss in currentlast 
call will be displayed per  5 second. (Displayed in 8 dig-
its. Max. value is 99999999.)
 - Codec
 - Payload (Payload size)
Display pattern of Codec and Payload is as follows.
• System InformationPress  2 in main screen, and move to System...

 207 
To see Network Settings Information
Press 1 in System Information menu.
Each Network Setting can be confirmed by pressing 
Up  and  Down  key.
Note:
To go back to System Information menu, press
Prev  soft key.
To see SIP Settings Information
Press  2 in System Information menu.
Each SIP Setting can be confirmed by pressing  Up 
and  Down  key.
Note:
To go back to System Information menu, press
Prev  soft key.
Prev
DHCP Mode
Disable/Enable
Up
Down
Prev
IP Address
XXX.XXX.XXX.XXX
Up
Down
...Prev...

 208 
To see Audio&Visual Settings Information
Press 3 in System Information menu.
Each Audio&Visual Setting can be confirmed by press-
ing  Up and  Down  key.
Note:
To go back to System Information menu, press
Prev  soft key.
To see Maintenance Settings Information
Press  4 in System Information menu.
Download address can be confirmed.
Note:
To go back to System Information menu, press
Prev  soft key.
Prev
Confirmation ToneDisable/Enable
Up
Down
Prev
Music
Default/Download DataUp
Down
...Prev
DTMF Play...

 209 
To see Terminal Information
Press 5 in System Information menu.
Each terminal information can be confirmed by press-
ing  Up and  Down  key.
Note:
To go back to System Information menu, press
Prev .
PingTo send Ping
Press  3 in main screen, and move to Ping menu.
Enter IP address of the server to send Ping, and press 
OK  key.
Note:
If Network Interface is not operated, following
message will be displayed.
Ping will be sent to the server  4 times.
If  Retry  was selected, screen will back to the...

 210 
• Detail of System Information Menu 
System 
Information 
Menu Items
Network Settings DHCP Mode IP Address     Note1
Default Gateway      Note1
Subnet Mask      Note1
DNS Address      Note1
VLAN Mode (for LAN port)
VLAN ID (for LAN port)
VLAN Priority (for LAN port)
Speed & Duplex (for LAN port)
PC Port VLAN Mode     Note2
PC Port VLAN ID      Note2
PC Port VLAN Priority      Note2
PC Port Speed & Duplex      Note2
PC Port Available
EAPOL Forwarding
CDP Mode
To S  ( R T P )
To S  ( S I P )...

 211 
Note 1:
“(DHCP)” is indicated on the display when
the parameter is obtained from the DHCP
server.
(ex.) IP Address
Note 2:
This item is not displayed on DT710 (ITL-
6DE-1).
Terminal Infor-
mation Hardware Version
MAC Address
Firmware Version
Bottom option
Side Option 1
Side Option 2
System 
Information 
Menu Items
Prev
IP Address(DHCP)
XX:XX:XX:XX:XX:XX
Up
Down  

 212 
11.
W
EB 
P
ROGRAMMING
Web Programming allows the user to configure the terminal settings of DT Series from the PC. The user use Internet
browser (Internet Explorer, etc.) to access Web Programming.  It is not necessary to install any special application
software onto the PC. 
PC Requirements For Web Programming
Note:
This feature is only available for DT700 Series.
Note:
DT700 Series and Web Programming PC needs to be connected to the same network. When downloading the
files for Music on Hold,...