NEC Itl12d1 User Guide

 213 
TO LOGINFollow the steps below to open the Web Programming.
 Start up 
Internet browser
 on the PC.
Enter IP address of the target DT700 Series on the address toolbar and then press Enter key.
The Web Programming Login screen appears. Enter User Name and Password and then click    button.
Note:
Enter the same user name (login ID) and password used  when logging into the DT700 Series. Station Number is
used as user name and password by the default setting.
Note:
For IP address of DT Series, contact...

 214 
The following Web Programming Home screen appears.  

 215 
TO LOGOUTFollow the steps below to open the Web Programming.Click    button at the lower left of the screen.
The confirmation me ssage appears. Click   
button to log out of Web Programming.
The display changes as follows. Click   but-
ton.  After the Web Programming Login screen is dis-
played, close the Internet browser.  
Logout
OK
Back
Note:
Make sure to perform the logout operation after
the data setting of the telephone.
Note:
When 15 minutes have passed leaving the PC
without operation...

 216 
TO ENABLE/DISABLE OFF-HOOK 
RINGINGThe procedure below shows how to enable/disable Off-
hook ringing.  
STEP 1: From the Home screen, click  User Setting →
Incoming Call  →  Offhook Ring . 
STEP 2: Select  1. Disable or 2 Enable  by clicking the
corresponding radio button. 
STEP 3: Click   button to  save the change to the
database. 
STEP  4: The following dialog appears. Click   but- ton on the dialog.
TO SET RINGING OF HEADSETThe procedure below shows how to enable/disable the
ringing of...

 217 
TO SET RINGER TONEThe procedure below shows how to change the ringer
tone for internal call and external call.
STEP 1: From the Home screen, click  User Setting →
Incoming Call  →  Ring Tone  →  External
Call /Internal Call . 
STEP 2: Select a desired tone type by clicking the cor- responding radio button. 
STEP 3: Click   button to  save the change to the
database.  STEP  4: The following dialog appears. Click   but-
ton on the dialog.

OK
No.
Menu Item
Frequency (Hz)
Remarks
1st
2nd
0 Automatic...

 218 
TO SET ILLUMINATION PATTERN 
FOR CALL INDICATION LAMPThe procedure below shows how to set the illumination
pattern for the Call Indicator Lamp.
STEP 1: From the  Home screen, click  User Setting →
Incoming Call  →  Illumination  →  External
Call /Internal Call . 
STEP 2: Select a desired illumination pattern by click- ing the corresponding radio button. 
STEP 3: Click   button to  save the change to the
database.  STEP  4: The following dialog appears. Click   but-
ton on the dialog.
OK
OK  

 219 
TO ENABLE/DISABLE RTP ALARMThe procedure below shows how to enable/disable
RTP alarm.
STEP 1: From the Home screen, click  User Setting →
Talk  →  RTP Alarm . 
STEP 2: Select  1. Automatic, 2. Disable  or 3. Enable
(see the following table).  STEP 3: Click   button to save the change to the
database. 
STEP  4: The following dialog appears. Click   but- ton on the dialog.Menu Items
Descriptions
1 Automatic
( Note1 ) Follow the setting on the System. If no 
setting is made in the System, the...

 220 
TO ENABLE/DISABLE DTMF TONEThe procedure below shows how to enable/disable
RTP alarm.
STEP 1: From the Home screen, click  User Setting →
Talk  →  DTMF Tone . 
STEP 2: Select  1. Automatic, 2. Disable  or 3. Enable
(see the following table).  STEP 3: Click   button to save the change to the
database. 
STEP  4: The following dialog appears. Click   but- ton on the dialog.Menu Items
Descriptions
1 Automatic
( Note 1 ) Follow the setting on the System. If 
no setting is made in the System, the...

 221 
TO SET KEY TOUCHThe procedure below shows how to set Key Touch
Tone. Key Touch Tone is a tone generated when the
digit keys are pressed while DT Series is off-hook.
STEP 1: From the Home screen, click  User Setting →
Talk  →  Key Touch Tone . 
STEP 2: Select  1. Automatic, 2. Disable  or 3. Tone  or
4. Voice .
STEP 3: Click   button to  save the change to the
database. 
STEP  4: The following dialog appears. Click   but- ton on the dialog.NoteN
ote:
When 0 Automatic is set, the default setting...

 222 
TO SET MUSIC ON HOLDThe procedure below shows how to set Music on Hold
to be heard by DT Series user.
STEP 1: From the Home screen, click  User Setting →
Talk  →  Hold Music . 
STEP 2: Select  1. Default when the default data
(Menuet) is used as Music on Hold. Select  2.
Download  when a downloaded data is used
as Music on Hold. 
STEP 3: Click   button to  save the change to the
database. 
STEP  4: The following dialog appears. Click   but- ton on the dialog.
OK
OK