NEC Itl12d1 User Guide

 94 
• Character Entry Method
As an example of character entry method, the fol-
lowing shows how to enter “Ken Kobus” .
Press   key twice to enter “ K”.
Press   key or   Option soft key to display Sub 
Menu screen, and then select  Word-case to 
switch the text input mode from uppercase to low-
ercase. Press  
(
Enter )
 or OK  soft key on the Sub Menu 
to go back to text input screen. 
Enter “ en” by using digit keys.
 
Press   key twise to enter “e”.
Press   key twise to enter “n“.
Press   key once to...

 95 
switch the text input mode from lowercase to 
uppercase.
Press  
(Enter )
 or OK  soft key on the Sub Menu 
to go back to text input screen.
Press   key twice to enter “ K”. Press  key or 
Option soft key to display Sub-
Menu screen, and then select  Word-case to 
switch the text input  mode from lowercase to 
uppercase .
Press  
( Enter )
 or  OK soft key on the Sub Menu 
to go back to text input screen. 
12
Word-width
SubMenu345678
Paste SpaceChange-word
OK
Cancel
Cut
Delete
Copy
Return...

 96 
Enter “obus” by using digit keys.
 
Press   key three times to enter “o”.
Press   key twise to enter “b“.
Press   key twise to enter “u”.
Press   key four times to enter “s“.
Press  
(Enter )
 or OK  soft key.
Input a name.[Name]
OK
Back
Option
BK
a
Ken K
6287
Input a name.[Name]
OK
Back
Option
BK
a
Ken Kobu s  

 97 
• To Overwrite CharactersPlace the cursor at the left of the characters to be 
overwritten.
Press  key or Option soft key.
On the following Sub Me nu screen, select Over-
write/Insert  and then press   
(Enter )
,  
(Right-
cursor )
 or OK  soft key.  Enter new words over existing characters. In this 
example, “F” is entered.
Input a name.[Name]
OK
Back
Option
BK
A
ABCDE
Menu
10
12
Word-width
SubMenu345678
Paste
SpaceChange-word
OK
Cancel
Cut
Delete
Copy
Return
910
↓
↓Word-caseOverwrite/Insert...

 98 
• To Copy and Paste CharactersWhile characters which you want to copy are dis-
played, press   key or Option soft key.
On the Sub Menu screen, press   
( Enter ) 
or OK 
soft key while  Copy is highlighted, or press   
key.
Place the cursor at the starting point of the target  characters by using 
 (
Left-cursor )
 and then press 
Start  soft key.
Place the cursor at the end point of the target char-
acters  
( Right-cursor ) 
and then press  End soft 
key.
Place the cursor at position where you...

 99 
press 
 (Enter )
, 
 (Right-cursor )
 or OK  soft key. 
(or press   key.)
The copied characters “CD” are inserted as follows:
712
Word-width
SubMenu345678
SpaceChange-word
OK
Cancel
Cut
Delete
Return
910
↓
↓Word-caseOverwrite/Insert Copy
Paste
Input a name.[Name]
Back
BK
A
CDABCDE
Option
OK  

 100 
SECURITY MODE
 
DT730 Series has the Security ( ) key which
prevents information leakage from terminal. While the
terminal is locked, Security Lamp lights up. • TO LOCK THE TELEPHONEBefore placing DT700 Series in Security mode, you can
set a password. For details on the password setting,
see  TO CHANGE PASSWORD  in chapter 3 Terminal
Setup.
Press 
 (Security )
 key on DT730 Series. The fol-
lowing  message is displayed on LCD. Press  
(
Enter )
 or OK  soft key to place DT700 
Series in Security...

 101 
Note:
When the password entry ends in failure, the fol-
lowing error message is issued. In that case,
press 
 (Enter )
 or OK soft key and then make
a retry.
Note:
After a third attempt  (if incorrect password
entered three times), the following error message
is issued. Press 
 ( Enter )
 or OK  soft key. The
telephone locks up, and an y key operation will be
disabled for 10 minutes. After 10 minutes, make
a retry.
Password Error.
OK
Cancel
Retry?
Incorrect security code
OK
password entered.  

 101 
5.
F
EATURE 
O
PERATION
TO ORIGINATE A CALL USING 
SPEED CALLING (ONE-TOUCH 
SPEED CALLING KEYS) 
 
Press the desired One-Touch Speed Calling  key, 
or press   key and  One-Touch Speed Call-
ing  key.
To Program(Available only on DT Series with  One-Touch Speed 
Calling  key.)
Press  key.
Press desired  One-Touch Speed Calling  key.
Enter desired telephone number or feature access 
code on the keypad.
Display indicates the digits dialed.
Press   key again to save the number.To  Ve r i f y
Press...

 102 
LCD Indication of 8LD Display
Press the desired One-Touch Speed Calling  key 
and originate a call.
Registered name will be displayed as follows. For 
the key to which no name information is registered, 
the character “SPD” will be displayed.
When registering Name In formation of One-touch 
Speed Calling, the user ca n use uppercase alphabetic, 
uppercase European or lowercase European 
characters. 
The following tables show available characters for 
One-Touch Speed Calling  keys.
ALPHABETIC...