NEC Itl12d1 User Guide

 64 
• TO SET A LANGUAGE The following explains how to set a language to be
displayed on LCD.While indicating the current time on LCD, press   key to open the  Menu screen. 
Select  Setting and then press   ( Enter),  
( Right-cursor ) or OK soft key. (or press   key.)
Select  User Setting  and then press  ( Enter), 
( Right-cursor ) or OK soft key. (or press   
key.) Select 
Display and then press   ( Enter),  
( Right-cursor ) or OK soft key. (or press   key.)
Select  Language  and then press   (...

 65 
Select a desired language. After Making a selection, press   (Enter) or OK 
soft key.
12[Display]3456
OK
Back
Screen Server
Time Format
Local Volume
↓Back Light
Font Size
Language
Note:
The currently enabled item is highlighted.
01[Language]234567
Automatic
OK
Back
↓
89161514131211101718192021
Japanese
NEC EnglishNEC SpanishNEC FrenchGermanItalianNEC Portuguese
Dutch
Norwegian
Danish Swedish
Greek
Portuguese French
Spanish
English
Polish Turkish
Russian
Romania
Catalan  

 66 
• TO CHANGE PASSWORD To change an existing password, follow the procedure
below. This password is used for the following
occasions.
• To lock/unlock the telephone.
• To delete the directory data.
• To reset the telephone settings.While indicating the current time on LCD, press key to open the  Menu screen. 
Select  Setting and then press   ( Enter),  
( Right-cursor ) or OK soft key. (or press   key.)
Select  User Setting  and then press   
( Enter ),    ( Right-cursor ) or OK soft key. (or  press...

 67 
Enter the new password and then press   
(Down-cursor ) or Set  soft key.
Enter the new password again and then press   
( Enter )  or OK soft key. When the password entry 
completes successfully, 
the display changes as follows. Press   ( Enter)  
or  OK  soft key.
Note:
The initial password is 0000. When changing
the password for the first time, enter 0000 as
the old password.
New Pass[Change Password]
OK
Cancel
Set
BK
1
Old Pass
Retry Pass[Change Password]
OK
Cancel
Set
BK
1
Old Pass
Retry Pass...

 68 
• TO RESET TELEPHONE SETTINGS The following explains how to clear the personal data of
the telephone.While indicating the current time on LCD, press   key to open the  Menu screen. 
Select  Setting and then press   ( Enter),  
( Right-cursor ) or OK soft key. (or press   key.)
Select  User Setting  and then press  ( Enter), 
( Right-cursor ) or OK soft key. (or press   
key.) Select 
Setting and then press   ( Enter),  
( Right-cursor ) or OK soft key. (or press   key.)
Enter the password and then...

 69 
Press  (Enter) or OK soft key to clear the per-
sonal data of the telephone.
[Setting Reset]
OK
Back 1
Are you sure?  

 70 
• TO DOWNLOAD A FILE DT700 Series user can download files for Music on
Hold, Ringer Tone and Directory. When downloading
these files, the DT Series needs to be connected to the
network that has FTP (TFTP server). 
Before starting the download, an IP Address of the
FTP/TFTP Server must be entered from DT Series.
STEP 1: Set up the FTP/TFTP server.
Put the downloading file into the specified 
directory (In the case  of Windows servers, 
the default directory is C:InetPubftproot) of 
FTP server.

Put...

 71 
STEP 5: Select a protocol used by the server whichstores the download file. After making a se-
lection, press   ( Enter) or OK soft key.
STEP 6: The display goes back to the  Download
Menu  screen. Select  FTP Settings and
then press   ( Enter),  ( Right-cursor )
or  OK  soft key. (or press   key.) STEP 7: Select 
User ID and then press   ( En-
ter ),  ( Right-cursor ) or OK soft key. (or
press  key.)
STEP 8: Enter a User ID by using digit keys, then press  ( Enter) or OK soft key.
12[Download...

 72 
STEP 9: The display goes back to the FTP Settings
screen. Select  Password and then press
 ( Enter ),  ( Right-cursor ) or OK soft
key. (or press   key.)
STEP 10:Enter a password by using digit keys, then press  ( Enter) or OK soft key. STEP 11:The display goes back to the 
FTP Settings
screen. Select  Folder and then press 
( Enter ),  ( Right-cursor ) or OK soft key.
(or press   key.)
STEP 12:Enter the directory (including root directory) where the download file is stored and then
press  ( Enter)...

 73 
STEP 14:Select Download Address  and then
press  ( Enter),  ( Right-cursor ) or OK
soft key. (or press   key.)
STEP 15:Enter an IP address of the FTP/TFTP server which stores the download file. For example,
to set the IP address of 10.41.208.205, enter
10*41*208*205 [separate with an asterisk
(*)]. After entering an IP address, press   (
Enter) or 
OK  soft key.
STEP 16:The display goes back to the  Download
Menu  screen. Select  Download Files and
then press   ( Enter),  ( Right-cursor )
or  OK...