Motorola Workabout Pro 4 User Guide

Configuration 3 - 49
The new partition is automatically mounted. This is indicated by an asterisk (*) next to its name in the partition 
list. Any unallocated space on t he card is indicated at the left, and additional partitions can be created in it. 
Partition Management
Partitions can be individually d ismounted, mounted, deleted, or  formatted as well. These and additional tasks 
are available from the  Partition Properties dialog:
To dismount a partition:
1. Choose the desired partition. 
2. Tap the...

3 - 50 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
5. Choose your format options. These options include:
• Version of file system (FAT-16,  for devices holding up to 4 GB; or FAT-32, for devices containing up to 
32 GB).
• Number of FATs (File-Allocation Tables).
• Number of entries allow ed in the root directory.
• Cluster size (.5 KB to 64 KB).
There are also two check boxes, which govern:
• Whether to use the transaction-s afe FAT file system (TFAT). This file system keeps multiple copies of...

Configuration 3 - 51
Stylus Properties
• In the Control Panel , choose the Stylus icon.
Double-Tap
• In the  Double-Tap  menu, follow the directions to tailor the sensitivity of the s tylus when you tap on 
the touchscreen.
Calibration
Touchscreens rarely require recalibration. However, if your tou chscreen has never been calibrated or if you find 
that the stylus pointer is not  accurate when you tap on an item , follow the directions below.
• Choose the  Calibration tab, and then tap on the...

3 - 52 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
Touch
This tab allows you to disable the touchscreen.
• Choose the Touch tab. Select the check box next to  Disable the touch panel.
System Properties
This program identifies the com puter software and hardware comp onents, indicating which components are 
installed, their identification, version or part numbers, and w hether they are enabled or disabled. 
•In  Control Panel , choose the System Properties  icon.
• By choosing the  Export button,...

Configuration 3 - 53
Total Recall
Total Recall is a Zebra utility de veloped to maintain a pplications and settings during a cold boot, as well as 
clone settings to other devices . This utility creates a restore point of a device at a known state. This can be 
used as a backup of the device (t he administrator can clean the terminal and restore the profile at any time), 
or a clone (the administ rator can store different configurations for different uses to clone to other 
hand-held computers). 
• In...

3 - 54 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
• If you want to choose another l ocation for your backup file (optional), tap on the [...] button to the right of 
the  Profile Location  field and choose one of  a number of folders. 
- Tap on  Start. A backup of the cu rrent settings will be cr eated and saved to the specified location. The 
unit will then reboot.
To view profiles and choose r estore options, refer to Managing Profiles on page 3-55 .
Creating a Clone
Cloning allows you to copy...

Configuration 3 - 55
Managing Profiles
You can view profiles and choose profile options from the menus in this section. 
Viewing a Profile
• Tap on the Manage Profile  button to see your list of prof iles. Highlight a profile, and then you can choose 
to  View  the Profile Summary and go on t o the next menu, Profile Details.
Profile Options
• Tap on the Manage Profile  button to see your list of prof iles, as shown above. Highlight  a profile, and tap 
on the  Next button to choose from options to...

3 - 56 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
• Next, tap on the option button you want to use:
•Restore Now  – restores the profile immediately. If you are restoring a pro file that is a backup or Full Clone, 
the computer will clean reset fi rst; if the profile is a Settings Only Clone , it will not.
• Set for AutoRestore  – creates a profile that is au tomatically restored following a  cold reset or a clean 
start. The profile is stored in the  \Flash Disk\TotalRecall folder.
• Upload to...

Configuration 3 - 57
Deleting a Profile
• In the Total Recall  home screen, tap on  Delete Profile.
• In the next screen,  locate your backup file, and tap on  OK.
A warning pop-up screen appears  asking if you’re certain that you want to delete this file.
• Tap on  Ye s to delete the file.
TweakIt
This utility allows you  to tweak or adjust Advanced system settings (interface, ne twork, servers, driver, and 
radio) and provides a  Registry Editor.
USB drive prepared for cloning Autorun installation on...

3 - 58 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
Advanced
Advanced CE Services Settings
FTP Server
This option is enabled by default to allow file transfers. Keep in mind that data transfer in either direction is 
restricted to the Temp folder — that is, data are always loaded  from the FTP Server  to the Te m p folder and 
from the  Te m p folder to the  FTP Server.
If this option is disabled, a war m reset must be performed to a ccept the change.
Advanced Interface and Network Settings
Enable...