Motorola Workabout Pro 4 User Guide

Configuration 3 - 19
 Scanner Services
• Tap on Start>Settings>System>TweakIt  icon.
• Under the  Advanced tab, tap on  Advanced Services Settings , and double-tap on Scanner Services.
• In the  Scanner Services  dialog box, uncheck Use DataWedge (Uncheck for Psion Legacy).
• Press and hold down the  [FN/BLUE] and [Power]  buttons to reset the unit.
Display Properties
• In the  Control Panel , choose the Display icon.
 Background
• In the  Display Properties  dialog box, open the  Background tab. This...

3 - 20 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
 Appearance
• In the Display Properties  dialog box, open the  Appearance tab. This dialog box a llows you to customize 
the display colour scheme.
 Backlight
The backlight is activa ted for a configurable amount of time. The Display Properties  dialog box in the Control 
Panel  allows you to specify the intens ity of the backlight along with how long the backlight remains on when the 
unit is not in use (no key pr ess, scanner trigger, etc.). 
•...

Configuration 3 - 21
Intensity
This parameter is used to adjust the light intensity of the Workabout Pro4 backlight. Sliding the bar to the left 
lowers the light intensity, and s liding it to the right raises the intensity.
Bright For
The value chosen from this drop-down menu determines the durati on of time that the backlight stays on at the 
configured intensity after the la st user action (keypress, scan trigger). 
Dim For
The value chosen from this drop-down menu determines the durati on of time...

3 - 22 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
Utilities
The Utilities  tab can be used to log network  traffic. When you tap on the Start button, debug data is collected 
so that, if necessary, it can be f orwarded to a Zebra technician for evaluation. 
Settings
• Choose an  Error Level from the drop-down menu.
• To change the locati on where debug information will be stored, tap on the button to the right of the  Log 
Folder  option.
Error Reporting
Error Reporting  allows you to enable or...

Configuration 3 - 23
GPS (Global Positioning System) Settings
This applet allows you to define how the GPS module operates. 
• Tap on  Start>Settings>Control Panel>GPS Settings  icon.
GPS Tab
The  GPS  tab provides two options for the  GPS Source depending on the radio installed in the unit:  On-board 
GPS  if a WiFi radio is installed or  WAN GPS if a PH8 radio is installed.
On-Board GPS
Enable SBAS
SBAS (Satellite Based Augmentation  System) downloads satellite ephemeris (orbital) data to the...

3 - 24 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
Server Name and Port
These fields are used to enter your server IP address and Port  number. 
User ID Type
IMSI  (International Mobile Subscriber Identity) is used to identify the device on a cellular network. It is also 
used to identify the radio on the network. To protect the ident ity of the radio subscriber, this signal is rarely sent 
out.
MSISDN  (Mobile Station International Subscriber Director y Number) reads the phone number of the SIM...

Configuration 3 - 25
Input Panel
The Workabout Pro4 is equipped with a Soft Input Panel (SIP). Shown below is the standard Microsoft SIP, 
accessed from the Control Panel. 
Tapping on the Input Panel button displays a soft input panel ( soft keyboard) that can be customized using the 
Input Panel dialog box.
The soft keyboard oper ates just like a standard keyboard except  that rather than pressing a key, you tap on 
letters, numbers, modifier key s, etc. on the Workabout Pro4 scr een.
To customize the...

3 - 26 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
• Tap on the Options button to change the appear ance of your soft keyboard.
Figure 3-2Soft Keyboard Options
 Keyboard Properties
This icon displays the Keyboard Properties dialog box in which you can  adjust the repeat rate of the keys, the 
intensity of the keyboard backlight and the behaviour of the [F N] and [SYM] modifier keys. This dialog box also 
allows you to define macro keys and Unicode characters.
• In the  Control Panel , choose the...

Configuration 3 - 27
Repeat Rate
The value assigned for the Repeat Rate parameter determines how quickl y the key you press repeats and is 
measured in characters per second (cps). Sliding the bar to the  left slows the repeat rate, and sliding the bar to 
the right increases the repeat rate.
Keyboard Backlight
• In the  Keyboard Properties  dialog box, open the  Backlight tab.
Intensity
This parameter is used to adjust  the light intensity of the Workabout Pro4 keyboard backlight. Sliding the bar to...

3 - 28 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
The options in this tab allow you to determine how modifier key s on your Workabout Pro4 behave. For each 
modifier key — [ALT], [SHIFT], [CTRL], [FN/BLUE], and [FN/ORANG E] — you have the following options in the 
drop-down menu:  Lock, OneShot , and OneShot/Lock . 
Lock
If you choose  Lock from the drop-down menu, pressi ng a modifier key once locks it on  until you press the 
modifier key a second time  to unlock or turn it off. 
OneShot
If...