Motorola Workabout Pro 4 User Guide

About This Guide     xix
Figure   7SE4500 Slim Pod Laser Window Warning Label
Figure   8SE4500 Protective Housing and Certificate Label
Figure   9SE1524 Laser Warning Label 

CHAPTER 1 BASIC OPERATION
BASIC OPERATION1
Workabout Pro4 Features
Figure 1-1Front View of the Workabout Pro4 7528 Long Alphanumeric Keyboard
Speaker
Microphone LED
(Light Emitting Diode) 

1 - 2 Workabout Pro4 (Windows Embedded CE 6.0) User Manual
Figure 1-2Front View of Workabout Pro4 7528 Short Numeri c Keyboard (QWERTY keyboard also available)
Workabout Pro4 Modules Available
To see a current list of Workabout Pro4 accessories and modules, go to the website a
http://www.zebra.com/US-EN/Produ ct+Lines/Psion/?WT.mc_id=psion_us_p_handheld
Documents Available 
To see a current list of documents and download what you need,  go to the Knowledge Base on the 
IngenuityWorking community...

Basic Operation 1 - 3
Replacing the Battery Pack
Assuming the default power saving parameters and battery reserve level have not been altered, a battery can 
be removed for up to 4 minutes  without losing data. Beyond 4 mi nutes, the hand-held may reboot.
Removing the Battery Pack
1. If your unit is equipped with  a hand strap, unhook it from the base of the battery.
2. Turn the latches at the bottom  of the battery to unlock the battery cover. Remo ve the battery.
Installing the Battery Pack
1. Insert...

1 - 4 Workabout Pro4 (Windows Embedded CE 6.0) User Manual
Resetting the Workabout Pro4
To perform a warm or cold reset, you can access the menu by goi ng to Start>Shutdown . Alternatively you can 
use the keyboard shortcuts described below.
Performing a Warm Reset
During a  warm reset, running programs are halted. The contents of the file system,  RAM Disk, Flash Disk, and 
the registry are preserved.
• Press and hold down the  [FN/BLUE] key and the [Power]  key simultaneously for a minimum of 
four...

Basic Operation 1 - 5
Performing a Clean Start
A clean start  returns the Workabout Pro4 to fac tory settings, flushes the registry keys, and deletes volatile 
storage and the file  system. The Flash Disk is preserved.
• Press and hold down the  [FN/BLUE] key, the [Power] button and the  [Front SCAN] key simultaneously 
for a minimum of six seconds.
The Workabout Pro4 displays the Boot to BooSt menu.
• On an  alpha keyboard , type .clean .
• On a  numeric keyboard , type .25326 .
Boot to BooSt
If you...

1 - 6 Workabout Pro4 (Windows Embedded CE 6.0) User Manual
The Workabout Pro4 contains an 802.11a/b/g/n radio module. The  Fusion Wireless Companion  software 
contains applications to create wi reless profiles. To configure the radio, follow the  steps outlined under the 
heading  Fusion Wireless Companion - Set ting Up the 802.11a/b/g/n Radio on page 4-31.
To configure your  Bluetooth settings, go to  Bluetooth
® Setup on page 3-7. 
If you have a GPS (Glo bal Positioning System) module, see  GPS...

CHAPTER 2 GETTING TO KNOW THE WORKABOUT PRO4
GETTING TO KNOW THE WORKABOUT PRO4 2
Operating System
•Microsoft® Windows® Embedded CE 6.0 
Battery Details
Workabout Pro4 Hand-Held Computer is available with the following Lithium-ion battery pack options:
• 4400 mAh battery – Model Number WA3010
• 2850 mAh battery pack – Model Number WA3025
• 4680 mAh battery pack – Model Number WA3026
• Super capacitor power backup
For details battery spe cifications, refer to Appendix E: Workabout Pro4 Specifications...

2 - 2 Workabout Pro4 (Windows Embedded CE 6.0) User Manual
Charging the Battery
Batteries shipped from the facto ry are charged to approximately 40% of capacity. Lithium-ion battery packs 
must be fully charged before use. These batteries can be charge d with a variety of chargers and cradles. For 
detailed information about the se accessories, please see Chapter 4: Peripheral Devices & Accessories .
Normally it takes 3 to 4 h ours to charge a battery.
The Keyboard
Keyboard options varied dependi ng on...