Motorola Workabout Pro 4 User Guide

Configuration 3 - 9
HSP/HFP (Headset Profile/Hands-Free Profile) Service Commands
The HSP (Headset Profile) allows users to connect their device to  Bluetooth enabled headsets and other 
audio devices.
HSP/HFP services  provide the following unique menu options:
• Connect Audio  establishes an audio connection to the  Bluetooth headset.
• Disconnect Audio  disconnects the audio connection from the  Bluetooth headset.
• Volume Control  displays a dialog box where the headset and microphone volume can be...

3 - 10 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
Device Pop-up Menu
The  Device  pop-up menu allows you to pair a device, update a device name  or delete a device from the list.
Pair  begins the pairing process by q uerying the services and profiles of the discovered device. An  authentica-
tion  dialog box is displayed the first time a  Bluetooth device is paired.
Refresh Name  repeats the device name inquiry, updating the name. This comma nd is useful if a device is listed 
without a name...

Configuration 3 - 11
• Click in the check box to the left of the service to activate  it. 
• Click on  Done.
Services that require more infor mation present a configuration dialog box. Serial Profile is an example.
This dialog box offers  a number of additional options such as e nabling Encryption  and selecting fo ur different 
Modes : Serial , ActiveSync,  Scanner , and Printer Port .
Serial  is used for simple seria l port communication.
ActiveSync  is for ActiveSync-over- Bluetooth.
Scanner  is used...

3 - 12 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
Servers 
When a remote Bluetooth device initiates a  Bluetooth connection to the Workabout P ro4, the remote device is 
considered the  Bluetooth master and the hand-held, the  Bluetooth slave. In order for the remote device to 
connect to the hand-held, the Workabout Pro4 must offer a servi ce in the form of a server. The Servers tab 
allows these services to be enabled and configured. There are t hree server services available: Serial, Scanner...

Configuration 3 - 13
Tu r n  o n  Bluetooth  activates the  Bluetooth radio.
Discoverable determines whether the Workabout Pro4 is visible or invisible  to other devices.
Printer Port  allows you to assign and enable a virtual outgoing COM port selected from the drop-down menu 
to communicate with a paired  Bluetooth printer. Keep in mind that when a port is chosen, the printer  must be on 
and connected to the c hosen port for a remote device to be able to connect.
• Select a port within the  Printer...

3 - 14 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
4. To set up the Internet parameters, choose the  Network And Dial-up Connections icon from the 
Control Panel . 
5. Tap on  Make New Connection .
6. In the  Make New Connection  dialog box, choose Dial-Up Connection . Enter a name for your GPRS 
network connection.
7. Choose the  Next button to display the  Modem dialog box.
8. In the drop-down menu labelled  Select a modem, choose the name of the modem with which you want 
to connect, and t hen...

Configuration 3 - 15
The Workabout Pro4 communicates via Bluetooth to your Bluetooth  equipped cellular telephone and 
retrieves the pa rameters for the  Device Properties dialog box. Workabout Pro4 then disconnects.
9. Under the  Call Options tab, turn off Cancel the call if not  connected within, and press [Enter] to 
save your changes.
10. In the  Modem dialog box, choose the  Next button to display the Phone Number  dialog box.
The phone number you enter is ne twork carrier dependent. Once you’ve...

3 - 16 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
Once you’ve edited this dialog box to reflect your network carrier requirements, press  [Enter] to save 
your changes.
13. At this point, return to the  Control Panel, and choose the  Network and Dial -up Connections icon.
14. In the network connection wi ndow, the new network configurat ion — in this case, New Connection is 
displayed. Tap on the new  icon.
When you tap on your new connection, an onscreen message indicates the status of your...

Configuration 3 - 17
You can import or remove certificates, and view certificate inf ormation for any listing, including names, dates, 
serial numbers, etc.
For a detailed description about  Certificate setup for both the server and client-side devices (Workabout Pro4 
Hand-Held Computers), refe r to the following web site:
http://technet.microsoft.com/en-us/windowsserver/dd448615.aspx
Data Transfer between Workabout Pro4 and a PC 
Data transfer options vary slight ly depending on the type of operating...

3 - 18 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
Using Windows Mobile Device Center
If you are running Windows Vista, Windows 7,  or later, your data transfers do not require ActiveSync. 
Instead, you will need to download  Windows Mobile Device Center. For instructions, go to the following web 
site and type the name  into the search box: 
http://www.microsoft.com/d ownloads/en/default.aspx 
To transfer data between y our PC and your hand-held:
• Tap on  Start>Computer  to display the drives....