Motorola Workabout Pro 4 User Guide

Configuration 3 - 59
Advanced Services Settings
Scanner Services
The  Scanner Services  option is used to disable Dat aWedge application and enable  Scanner 
Services application.
SNTP (Simple Network Time Protocol) Server
The  SNTP Server Name  typed in this dialog bo x is used to synchronize Workabout Pro4  time with the server 
time. A warm reset must be perfo rmed once the server name as be en entered.
Registry Editor
This option is reserved for senior administrators who have a st rong understanding...

3 - 60 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
You can also follow the steps be low to access the phone dialer:
1. To access the dialer, tap on  Start>Settings>Control Panel.
2. Tap on the  Wireless WAN icon , and then tap on the  Vo i c e tab.
The  Voice  tab displays a phone dialer used to dial phone numbers. The  Voice menu provides commands 
which allow you to manage your phone contacts, view your phone  history, and so on.
Dialing a Number
To make a phone call: 
• Type the recipient’s...

Configuration 3 - 61
• Press the [Talk] key to answer a call or to display the onscreen phone keypad s o you can initiate a call.
• Press the  [End] key to terminate a phone call.
Receiving an Incoming Call
To answer an incoming call:
• Tap on the  [Talk] button; it’s labelled with a  green phone receiver.
Voice Menu
This menu allows you to manage calls, view your call history, a nd if required, assign a call forwarding service to 
your hand-held.
Call Management
The  Call Management  option only becomes...

3 - 62 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
2. Choose a command from the  drop-down menu, and tap on Execute  to carry out the command on the 
highlighted phone number.
If you have two active calls on your hand-held, one  On Hold and one  Active, you can set up a conference call 
between yourself and the other c allers. To set up a conference call:
• Highlight the phone number that is currently  On Hold, and choose Retrieve. Tap on Execute.
Both calls will be listed as  Active in the  Call...

Configuration 3 - 63
Services
The  Service  menu offers several options for  your hand-held to customize the behaviour of your phone. You 
can, for example, bar incoming calls, tailor to whom your calle r ID will be transmitted, set up call forwarding, 
and so on. If you choose an option, it may take a number of sec onds for your unit to read the network settings. 
• Tap on the  service you want to enable. 
The  service  dialog boxes allow you to tailor your a vailable services to meet your...

3 - 64 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
• Type the name corresponding to  the phone number you want to add.
• Press  Ta b and type the phone number you want to store.
• Tap in the check box next to  Store in SIM to save the phone number there, or leave this check box blank  if 
you prefer not to store the number on the SIM card.
• Tap on the  Execute button to save the phone number in your  Phonebook.
Phonebook  entries are saved even after you exit Wireless WAN.
Once you’ve added a...

Configuration 3 - 65
• In the Control Panel , choose the Volume & Sounds icon.
Volume Adjustments
• Slide the volume button to the le ft to lower the volume or to the right to increase the volume.
• Under the heading Enable sounds for , enable the conditions under which you want the hand-held to emit 
a sound.
Sound Adjustments
This dialog box allows you to assign sounds to identify particu lar actions. For example, you can choose the 
sound your hand-held will emit whe n you close a program and choose...

3 - 66 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
A network profile contains settings for SSID (Service Set Ident ifier) and security options.
• Tap on the  Fusion icon at the bottom of the screen to display the  Fusion menu. Alternately, you can tap on 
Start>Programs>Fusion>Wireless Launch .
The  Fusion Launcher  menu items and their correspondi ng applications are summarized in the table following.
WARNING!Due to regulatory requirements, this unit is set to  Enable 802.11d by default. If your...

Configuration 3 - 67
Creating a New Profile
• Tap on Manage Profiles.
• Tap and hold the stylus on the  Manage Profiles window, and choose  Add from the pop-up menu to 
display the  Wireless LAN Profile Entry  window.
• In the  Profile Name  dialog box, type a  name for the profile
• In the  ESSID Profile ID  dialog box, type the  ESSID.
•Tap  Next to display the  Operating Mode  dialog box.
• In the  Operating Mode  drop-down menu, choose  Infrastructure. (Keep in mind that because the  Regula-
tory...

3 - 68 Workabout Pro4 (Windows Embedded CE 6.0) User Guide
• In the Authentication Type  drop-down menu, choose  None.
•Tap  Next to display the  Encryption dialog box.
• Choose an  Encryption Type  from the drop-down menu.
•Tap  Next to display the  IPv4 Address Entry  dialog box.
• Ensure that all three items are checked. Tap on  Next.
•Tap  Next to display the  Battery Usage dialog box, and choose a  power consumption option.
NOTEEach Authentication Type has a unique  configuration screen attached to...