Motorola Mc9500k Manual

							Chapter 8 Accessories
Introduction
Table 8-1 lists the accessories available for the MC9500-K Series mobile computer.
Table 8-1    MC9500-K Series Accessories
AccessoryPart NumberDescription
Cradles
Single Bay USB Cradle CRD9500-1000UR Charges the MC9500-K main battery. Synchronizes the 
MC9500-K with a host computer through a USB connection.
Four Bay Charge Only 
CradleCRD9500-4000CR Charges up to four MC9500-K devices.
Four Bay Ethernet Cradle CRD9500-4000ER Charges up to four MC9500-K devices and connects the 
MC9500-K with an Ethernet network.
Vehicle Cradle VCD9500-1000R Installs in a vehicle and charges the MC9500-K main 
battery.
Chargers
Single Slot Battery 
ChargerSAC9500-1000CR Charges one MC9500-K battery.
Four Slot Battery Charger SAC9500-4000CR Charges up to four MC9500-K batteries.
Vehicle Battery Charger VBC9500-1000R Charges one MC9500-K battery in a vehicle.
Miscellaneous
Modem Dongle MDM9000-100R Provides modem connectivity for the MC9500-K.
Magnetic Stripe Reader MSR9500-100R Snaps onto the MC9500-K and adds magstripe read 
capabilities.
Spare 4800 mAh 
lithium-ion batteryBTRY-MC95IABA0
BTRY-MC95IABA0-10Replacement 4800 mAh battery.
Replacement 4800 mAh battery (10-pack). 
						

							8 - 2 MC9500-K Mobile Computer User Guide
Belt Mounted Rigid Holster SG-MC9511110-01R Clips onto belt to hold the MC9500-K when not in use.
Fabric Holster SG-MC9521110-01R Soft holder for added protection.
Handstrap SG-MC9523043-01R Replacement handstrap (5-pack).
Cradle Guides KT-122014-01R Provides assistance for placing an MC9500-K onto a four 
bay cradle (4-pack).
Screen Protector KT-122010-01R Package of 3 screen protectors.
Spare Stylus, 3 Pack KT-122016-03R Replacement stylus (3-pack).
Spare Stylus, 50 Pack KT-122018-50R Replacement stylus (50-pack).
Power Supply KT-14000-148R  Supports the Single Bay USB Cradle, Single Slot Battery 
Charger and Four Slot Battery Charger.
Power Supply 50-14000-241R Supports one Four Bay cradle or up to  four (4) Four Slot 
Battery Chargers.
Cables
USB/Charge Cable 25-116365-01R Provides power to the MC9500-K and USB communication 
with a host computer.
Auto Charge Cable VCA9500-01R Charges the MC9500-K using a vehicle’s cigarette lighter.
DEX Cable 25-116366-01R Connects the MC9500-K to a vendor machine.
4-way DC cable 25-85992-01R Used to power up to four Four Slot Battery Chargers with 
one power supply (50-14000-241R).
USB Sync Cable 25-124330-01R micro USB Client Communication Cable connects Single 
Bay USB Cradle to the host system (micro USB B to USB 
A).
Single Bay USB 
Cradle/Charger Y-Cable25-122026-01R Connect the Single Bay USB cradle and a Single Slot 
Battery Charger to a single power supply.
Modem Adapter Cable 25-116367-01R Connect the MC9500-K to the Modem Dongle.
Headset Adapter Cable 21-116368-01R Connects a VX1 headset to the MC9500-K.
AC Line Cord 23844-00-00R Connects a power supply to an outlet (US only).
DC Cable 50-16002-029R Connects from the four bay cradle to a power supply.
Vehicle Battery Charger 
Cable25-122028-01R This jumper cable connects the vehicle battery charger to 
the vehicle cradle.
Brackets
Desk Mounting Bracket KT-116363-01R Use for mounting a four bay cradle or two four slot battery 
chargers on a desk.
Universal Wall Mounting 
BracketKT-116362-01R Use for mounting a four bay cradle or two four slot battery 
chargers on a wall.
Table 8-1    MC9500-K Series Accessories (Continued)
AccessoryPart NumberDescription 
						

							Accessories 8 - 3
Universal Accessory System
The Motorola Universal Accessory System is a portfolio of accessories that can be easily configured and 
re-configured when the need arises. The system consists of cradles, chargers, power supplies, cables and 
mounting brackets.
Vehicle Mounting Bracket KT-122012-01R Used for mounting the vehicle cradle and vehicle battery 
charger in a vehicle.
Four Slot Battery Charger 
Desk Mount BracketKT-116364-01R Used for mounting the Four Slot battery Charger on a 
desktop.
Table 8-1    MC9500-K Series Accessories (Continued)
AccessoryPart NumberDescription 
						

							8 - 4 MC9500-K Mobile Computer User Guide
Single Bay USB Cradle
This section describes how to use a Single Bay USB cradle with the MC9500-K. For power and USB 
communication setup procedures refer to the MC9500-K Series Mobile Computer Integrator Guide.
The Single Bay USB Cradle:
Provides 5.4 VDC power for operating the MC9500-K.
Synchronizes information between the MC9500-K and a host computer. Refer to the MC9500-K Mobile 
Computer Integrator Guide for information on setting up a partnership between the MC9500-K and a host 
computer.
Charges the MC9500-K’s battery.
Communication and Charging the MC9500-K Battery
To charge the MC9500-K battery and to communicate with a host computer:
1.Ensure that the cradle is connected to power and to a host computer.
2.Align and hook the MC9500-K interface pocket onto the cradle’s cleat.
Figure 8-1    Hooking the MC9500-K onto the Single Bay USB Cradle 
						

							Accessories 8 - 5
Figure 8-2    MC9500-K Battery Charging
The MC9500-K’s Battery Status LED indicates the status of the battery charging in the MC9500-K. See Table 2-6 
on page 2-7 for charging status indications. The 4800 mAh battery fully charges in less than six hours.
Battery Status LED
Cleat
Interface Pocket 
						

							8 - 6 MC9500-K Mobile Computer User Guide
Single Slot Battery Charger
This section describes how to use a Single Slot Battery Charger.
Charging the Battery
To charge a spare battery:
1.Ensure that the charger is connected to power.
2.Insert the spare battery into the slot to begin charging.
Figure 8-3    Single Slot Spare Battery Charging
The charging status is indicated on the front of the battery. See Table 2-7 on page 2-8 for charging status 
indications. The 4800 mAh battery fully charges in less than six hours. 
						

							Accessories 8 - 7
Four Bay Charge Only Cradle
This section describes how to use a Four Bay Charge Only cradle with the MC9500-K.
The Four Bay Charge Only cradle:
Provides 5.4 VDC power for operating the MC9500-K.
Simultaneously charges up to four MC9500-K devices.
Mounts on a wall or desktop using the appropriate mounting bracket.
Charging
To charge the MC9500-K:
1.Ensure that the cradle is connected to power.
2.Align and hook the MC9500-K interface pocket onto the cradle’s cleat. Optional guide cups can be used to 
assist in placement of the MC9500-K onto the cradle.
Figure 8-4    Hooking the MC9500-K onto a Four Slot Cradle 
						

							8 - 8 MC9500-K Mobile Computer User Guide
Figure 8-5    MC9500-K Four Bay Charge Only Cradle with Optional Guide Cups
The MC9500-K’s Battery Status LED shows the status of the battery charging in the MC9500-K. See Table 1-1 on 
page 1-7 for charging status indications. The 4800 mAh battery fully charges in less than six hours. 
						

							Accessories 8 - 9
Four Bay Ethernet Cradle
This section describes how to use a Four Bay Ethernet cradle with the MC9500-K. For setup and cradle 
communication setup procedures refer to the MC9500-K Mobile Computer Integrator Guide.
The Four Bay Ethernet cradle:
Provides 5.4 VDC power for operating the MC9500-K.
Connects up to four MC9500-K devices to an Ethernet network.
Simultaneously charges up to four MC9500-K devices.
Mounts on a wall or desktop using the appropriate mounting bracket.
Communication and Charging
To charge the MC9500-K battery and communicate with a host computer:
1.Ensure that the cradle is connected to power and an Ethernet hub.
2.Align and hook the MC9500-K interface pocket onto the cradle’s cleat. If available, use the guide to assist in 
placement of the MC9500-K onto the cradle. See Figure 8-4 on page 8-7.
Figure 8-6    Four Bay Ethernet Cradle with Optional Guide Cups
The MC9500-K’s Battery Status LED shows the status of the battery charging in the MC9500-K. See Table 1-1 on 
page 1-7 for charging status indications. The 4800 mAh battery fully charges in less than six hours. 
						

							8 - 10 MC9500-K Mobile Computer User Guide
LED Indicators
Speed LED
The cradle’s green Speed LED lights to indicate that the transfer rate is 100 Mbps. When it is not lit it indicates that 
the transfer rate is 10Mbps.
Link LED
The cradle’s yellow Link LED blinks to indicate activity, or stays lit to indicate that a link is established. When it is 
not lit it indicates there is no link.
Figure 8-7    Four Slot Ethernet Cradle LED Indications
Link LED
Ye l l o w )Speed LED
(Green)