Motorola I90c User Guide

							13
Turning Your i 90c Phone On/Off
If your display readsNo Serviceor doesn’t change to the idle screen when you
turn on your phone, and you know you are in a Nextel coverage area, contact
Nextel Customer Care. For details on Nextel coverage areas, go tonextel.com.
PoweringthePhoneOff
4If you have enabled your SIM PIN security feature (see “Enabling/
Disabling the PIN Security Feature” on page 16), theEnter SIM PIN
Codescreen displays. Enter your SIM PIN (see “Entering the SIM
PIN” on page 17).
PressCunder OK.
5As your phone connects to the Nextel
National Network, you will seeWelcome
To N e x t e land a connecting message.
When the idle screen appears on the
display as shown here, you are ready to
use youri90cphone!
1Press and holdpon the keypad until a tone briefly sounds and
Powering Offdisplays.
2Close the phone cover.
3Push down the antenna.
O 
						

							14
90
nextel.com
Enabling Over-the-Air-Radio-Service Software
(OARSS) Security
To receive OARSS programming, you must enable OARSS security the first
time you power on your phone or within 20 days of first activation of your
phone. See“Receiving Over-the-Air Programming”on page 14.
Receiving Over-the-Air Programming
If you have been set up to receive Over-the-Air Radio Service Software
(OARSS) programming, you will receive your Private ID and Talkgroup lists
for Direct Connect use, your Personal Telephone Number and the Nextel
Customer Care number via a Net Alert message.
In order to receive your programming, you must enable security (“Enabling
Over-the-Air-Radio-Service Software (OARSS) Security”on page 14). Within
24 hours of enabling OARSS security, you will receive a Net Alert message
containing your lists.
1When you power on your phone for the
first time, after the idle screen appears,
you will be prompted to select OK to
update your browser info.
NOTE: If you pressCunder LATER,
youwillbepromptedtoenable
security each time you power on
your phone until you press
Cunder OK. It is recommended
that you do not choose LATER.
2PressCunder OK.
3You are prompted to enable security. PressCunder YES.
A series of screens display. If you subscribe to a Nextel Online
Service
SMplan, your home page displays.
4Pressrto return to the idle screen.
a 
						

							15
SIM Card
Accepting Your Phone’s Programming
SIM Card
Your phone comes with a built-in level of security protection through the use of
the SIM (Subscriber Identity Module) card. The SIM card stores all your
Phonebook information and your Nextel account identification information.
Since this information is stored on the SIM card, not in your phone itself, you
can remove the information by removing the SIM card.
NOTE: Except for making emergency calls, your phone will not
function without the SIM card.
The SIM card is located in the SIM card holder on the back of the phone,
underneath the battery. You can verify the SIM card is in place by removing the
battery and viewing the SIM card through the SIM card cover.
See“Inserting/Removing the SIM Card”on page 20 for information on locating
the SIM card. If there is no SIM card in your phone, notify your Nextel
Authorized Representative.
SIM Card Personal Identification Number (PIN)
To prevent unauthorized use of your account, you can protect your SIM card by
enabling the SIM PIN security feature. With the SIM PIN enabled, you must
enter your PIN each time the phone is powered on. You can change or disable
your PIN if desired.
1You will receive a Net Alert with the messageNew Browser Message -
Receive Programming Info.
2PressCunder GOTO.
3You are prompted to accept changes to your phones lists. PressC
under OK.
4A confirmation screen displays. PressCunder OK.
5You are prompted again to accept changes to your phones lists. Press
Cunder OK.
6A confirmation screen displays. PressCunder OK.
7Pressrto return to the idle screen. 
						

							16
90
nextel.com NOTE: It is recommended that you enable the SIM PIN security feature
to prevent fraudulent use of the SIM card, your
i90cphone, and
your account.
Enabling/Disabling the PIN Security Feature
When the PIN security feature is enabled, you are prompted to enter your PIN
each time you turn on your phone. Until a valid PIN is entered, you can use the
phone only to make emergency calls.
After the PIN is accepted, the phone registers on the network and the idle screen
displays.
When the PIN security feature is disabled, the phone can be used without
entering a PIN.
IMPORTANT: It is recommended that you enable the PIN security
feature to protect personal data on your SIM card. This
prevents anyone from using your phone and accessing
your personal data.
1At the idle screen, pressqand then
pressRto scroll toSettings.
2PressCunder SELECT. TheSettingsscreen displays.
B 
						

							17
SIM Card
Once you have enabled the SIM PIN security feature, it is recommended that
you change your PIN to a number known only to you (see“Changing the PIN”
on page 18).
Entering the SIM PIN
IMPORTANT: Incorrectly entering your PIN three times causes the SIM
card to be blocked. To unblock your SIM card, you must
contact Nextel Customer Care. For more information,
see“Unblocking the PIN”on page 19.
3PressRto scroll toSecurity.PressC
under SELECT to access theSecurity
screen.
4At theSecurityscreen, pressRto scroll toSIM PIN.PressCunder
SELECT to access theSIM PINscreen.
5PressRto scroll toOnorOff.Onenables the SIM PIN security
feature;Offdisables the SIM PIN security feature. PressCunder
SELECT.
6At theVerify SIM PIN Codescreen, enter the current SIM PIN and
pressCunder OK.
NOTE: The default SIM PIN is 0000.
C 
						

							18
90
nextel.com
If you enter an incorrect PIN, the messageSIM PIN incorrect: Try again
appears on your phone’s screen. After three consecutive incorrect attempts, the
SIM card is blocked. Once blocked, the phone will not allow you to enter your
PIN again, even after powering the phone off and back on. If this happens, see
“Unblocking the PIN”on page 19.
Changing the PIN
NOTE: In order to change the PIN, the SIM PIN security feature must be
set to On. See“Enabling/Disabling the PIN Security Feature”on
pa ge 16 .
1From theEnter SIM PIN Codescreen,
enter your 4- to 8-digit PIN. An asterisk
appears for each character entered. The
default SIM PIN is 0000.
NOTE: Other than emergency dialing,
you will be unable to use any of
the phone functions, including
receiving phone calls, until you
enter the PIN.
2PressCunder OK.
1From the idle screen, pressqand then
pressRto scroll toSettings.
2PressCunder SELECT. TheSettingsscreen displays.
P
B 
						

							19
SIM Card
Unblocking the PIN
If you forget your PIN and unsuccessfully enter it three times, access to your
phone will be blocked.
NOTE: Before you begin, obtain the PIN Unblocking Key (PUK) code
from Nextel Customer Care, then review the PIN unblocking
sequence. When entering the key press sequence, each key
press must occur within 5 seconds of the prior key press.
3PressRto scroll toSecurity.PressC
under SELECT to access theSecurity
screen.
4At theSecurityscreen, pressRto scroll toNew Passwords.PressC
under SELECT to access theNew Passwordsscreen.
5At theNew Passwordsscreen, pressRto scroll toSIM PINand press
Cunder SELECT.
6At theEnter Old SIM PIN Codescreen, enter the current SIM PIN
and pressCunder OK.
NOTE: The default SIM PIN is 0000.
7At theEnter New SIM PIN Codescreen, enter a new 4- to 8-digit SIM
PIN and pressCunder OK.
8At theRe-enter New SIM PIN Codescreen, re-enter the new SIM PIN
to confirm, and pressCunder OK.
NOTE: The default SIM PIN is 0000.
C 
						

							20
90
nextel.com
IMPORTANT: If you unsuccessfully enter the PUK code ten times, the SIM card
is permanently blocked and must be replaced. If this happens, all
data will be lost. You will get a message to contact your service
provider. Contact Nextel Customer Care for assistance. If the SIM
card is blocked, thei90cphone only allows outgoing Emergency
calls.
To unblock the PIN:
Inserting/Removing the SIM Card
IMPORTANT: If you remove your SIM card and insert it into another phone, some
information does not display when you use new phone with your SIM
card. All Phonebook information remains stored on your original SIM
card. The following information does not display:
IMPORTANT: Do not touch the gold-colored areas of the SIM card.
To avoid loss or damage, do not remove your SIM card from your phone
unless absolutely necessary.
Inserting SIM Card
1Press**05s.
2Enter the 8-digit PUK code.
3Presss.
4Enter a new 4- to 8-digit SIM PIN and presss.
5Re-enter your SIM PIN and presss.
If you entered the codes properly, theSIM Unlockedscreen displays.
Datebook notificationsRecent Calls List
Voice RecordsCall filtering settings in Styles
Personalized settingsInformation stored in Memo
Net Alert notifications
Voice Names for Phonebook entries and Shortcuts
1With the phone powered off, remove the battery cover and battery. See
“Detaching the Battery”on page 10. 
						

							21
SIM Card
2With the antenna facing away from you
and the back of the phone exposed and
facing up, locate the SIM card holder.
3Hold the SIM card with the gold contact
side facing down and the cut corner in the
lower left.Do not touch the gold-colored
areas of the SIM card.
4Carefully slide the SIM card to the right and into
the phone, until it lies flat in the SIM card holder.
SIM card
holder
cut corner 
						

							22
90
nextel.com
Removing SIM Card
NOTE: To remove your SIM card, you will need a ballpoint pen. Sharp
objects may damage your phone and void the warranty.
1With the phone powered off, remove the battery cover and battery. See
“Detaching the Battery”on page 10.
2With the back of the phone exposed and
facing you, insert the tip of a ballpoint pen
into the slot to the right of the SIM card,
along the right edge of the SIM card.
3With your other hand, gently press the
PUSH tab to the left of the SIM card. Hold
this tab down.
slot
tab