Motorola I90c User Guide

							153
Settings
Vi b eA l l—choosingOnsets the phone to vibrate for all calls, messages,
and alerts; choosingOffenables you set the type of notification for each of
these features.
Ring Style and Notification Type
When you setVibeAlltoOn, your phone vibrates to notify you of all types of
calls, messages, and alerts.
When you setVibeAlltoOff, the following features display afterVibeAllon
theRing/Vibratescreen, enabling you to set notification options for each:
Line 1—sets the ring style and type of notification for calls on Line 1.
Line 2—sets the ring style and type of notification for calls on Line 2.
Pvt/Grp—sets type of notification for Private and Group Calls.
Call Alert—sets the ring style and type of notification for Call Alerts.
Text Msgs—sets type of notification for Text Messages.
Reminders—sets type of notification for Datebook reminder alarms.
Voicemail—sets type of notification for Voicemail messages.
Net Alert—sets type of notification for Net Alert messages.
To setVibeAlltoOfforOn:
Or:
1From theRing/Vibratescreen, pressSto scroll toVibeAll.
2PressCunder CHANGE.
3PressSto scroll toOfforOn.
4PressCunder SELECT.
Use the volume buttons to setVibeAlltoOfforOn. Increasing the
volume setsVibeAlltoOff. Decreasing the volume as much as possible
setsVibeAlltoOn. 
						

							154
90
nextel.com
The following icons appear on your display screen to indicate the options you
have chosen:
Ring Styles
When you set a ring style, you can choose from many pre-set ring styles,
including musical tones.
You can customize your phone by adding musical ring tones. To do this,
download and install additional musical ring tones by ordering them via the
internet atwww.nextel.com/idenupdateand then downloading them to your
phone directly by using the Download Apps application.
NOTE: You must subscribe to the Nextel Online service in order to
download application over the air using Download Apps.
To set a ring style:Icon Indicates...
-Vi b ra te A l l- phone is set to vibrate when
you receive all types of calls, messages,
and alerts; theVibeAlloption isOn.
[Vi b ra te O n- phone is set to vibrate when
you receive phone calls.
\Vibrate Then Ring- phone is set to
vibrate and then ring when you receive
phone calls.
*Silent- phone is set not to ring.
1From theRing/Vibratescreen, ensure thatVibeAllis set toOff.Then
pressSto scroll to any of the features that allow you to set a ringer
style:Line 1,Line 2,orCall Alert.
2PressCunder SELECT.
3With theSty lefield highlighted, pressCunder CHANGE. As you
highlight each ring style, that ring style will play. 
						

							155
Settings
You may want to make more room in your phone’smemorybydeletingsome
ring styles.
NOTE: If a ring style is deleted from your phone’smemory,itis
removed from your list of ring style options. You can no longer
assign the ring style to a feature, unless you download the ring
style again.
To delete a ring style from your phone’s memory:
NOTE: Ring styles, Voice Records, and Java application data share the
same memory space on your phone. Using a large amount of
memory to store Java application data or Voice Records
reduces the space available for ring styles. You can create more
memory space to store ring style by deinstalling stored Java
applications (see“Java Apps Memory”on page 148) or deleting
some Voice Records (see“Deleting Voice Records”on page
138).
Notification Types
When you set a notification type, you have these options:
Ring—the phone rings to notify you.
Vi b e—the phone vibrates to notify you.
Vi b e/ R in g—the phone vibrates and then rings to notify you. This option
is only available for calls on Line 1 and Line 2.
4PressRto scroll to the ring style you want to assign to the feature.
5To assign the ring style, pressCunder SELECT.
1From theSt y lescreen, pressSto scroll to the ring style you want to
delete from your phone’s memory. If menu iconSappears while the
ring style is highlighted, you may delete the ring styles.
2Pressq.
3If you want to delete only the ring style you highlighted, confirm that
Deleteis highlighted. If you want to delete all deletable ring styles,
pressRto scroll toDelete All.
4PressCunder SELECT. 
						

							156
90
nextel.com
Silent—the phone does not ring to notify you.
To set a notification type:
Phone Setup
Phone Setup sets some basic phone features. Access Phone Setup to set the
following options:
Line—enables you to choose Line 1 or Line 2 as the active line for
outgoing calls.
AutoAns—sets your phone to automatically answer an incoming call
after a specified number of rings. When this feature is turned on, the phone
answers by connecting you to the caller; it does not send the call to
Voicemail, unless you are out of coverage or on another call.
Any Key—when turned on, enables you to answer calls by pressing any
key on the alphanumeric keypad.
Network ID—enables you to set the phone’s network IDs under the
direction of a Nextel Customer Care Representative.
In Call Setup
In Call Setup sets the in-call timer, message notification, and call waiting
features.
TheIn Call Timeroption turns the following features on and off:
Display—the duration of each call displays on the phone’s screen
when the call ends.
1From theRing/Vibratescreen, ensure thatVibeAllis set toOff.Then
pressSto scroll to any of the features on theRing/Vibratescreen
afterVibeAll.
2PressCunder SELECT.
3With theTy p efield highlighted, pressCunder CHANGE.
4PressRto scroll to the notification type you want to assign to the
feature.
5To assign the notification type, pressCunder SELECT. 
						

							157
Settings
Minute Beep—an audible beep occurs every minute of an active call
at the 50 second mark.
TheNotificationsoption controls message notification during calls:
Receive All—notifies you of all types of messages during calls.
Msg Mail Only—notifies you of mail messages only; all other types
of message notifications are delayed until the call has ended.
Delay All—delays notification of all messages until the call has
ended. This is the default setting.
Call Waiting—enables you to turn off call waiting for the next call. After
you end the call, call waiting is turned back on.
Security
Security allows you to set security features:
Phone Lock—sets an optional code that locks your phone.
Keypad Lock—displays instructions for locking and unlocking your
phone’skeypad.
SIM PIN—enables and disables your phone’s SIM PIN security feature.
New Passwords—enables you to change your phone’s unlock code,
security code, and SIM PIN.
Master Reset—allows Nextel Customer Care to reset your service in the
event of a security or provisioning problem.
Using Phone Lock
The Phone Lock feature enables you to prevent your phone from being used
unless an Unlock code is typed into the keypad.
The Unlock code is required to enable the phone lock feature, to unlock the
phone, and to set a new Unlock code. Your default Unlock code is 0000.
Phone lock provides two options for locking the phone:
Lock Nowlocks the phone immediately after you set the option.
Auto Locklocks the phone the next time the phone is powered on.
Setting Keypad Lock
Thei90cphone includes a Keypad Lock feature that enables you to lock the
phones keypad to avoid inadvertently pressing keys or placing calls when the
cover is open. 
						

							158
90
nextel.com
To lock the phones keypad:
When you receive an incoming call, message or alert, Keypad Lock is
temporarily disabled. You can respond to the incoming call, message or alert.
When finished, pressruntil you return to the idle screen. Once you return to
the idle screen, Keypad Lock will automatically reactivate.
To unlock the phones keypad:
Enabling and Disabling SIM PIN
The SIM PIN option enables and disables the feature that requires a SIM PIN
code to be typed into the phone to access the information on the SIM card and to
make or receive calls. See“SIM Card Personal Identification Number (PIN)”on
page 15 for more information.
Setting New Passwords
The New Passwords option enables you to set three types of passwords that
control access to your phone:
Unlock Code—this code is used to control access to the phone using
Phone Lock. It is also required to access the Master Clear and Feature
Reset features. If you want to use any of these features, contact Nextel
Customer Care for your default Unlock code.
Security Code—this code is used to access the Master Reset feature
under the direction of a Nextel Customer Care Representative. It can also
be used to override your Unlock code under the direction of a Nextel
Customer Care Representative.
SIM PIN—this code is used to access the information on your SIM card
and to make or receive calls. When you get your phone, your SIM PIN is
0000. You should change this to a SIM PIN known only to you as soon as
you get your phone. For information on changing your SIM PIN, see
“Changing the PIN”on page 18. Pressq*.
Pressq*. 
						

							159
Settings
Using Master Reset
The Master Reset option is provided for use only under the direction of a Nextel
Customer Care Representative. It resets your service.
Personalize
Personalize contains options that control which major features are easiest to
access when you turn on your phone:
Main Menu—changes the order of the items on your main menu.
Keys—controls which main menu items appear above the two option keys
ontheidlescreen.
Power Up App—sets any of the programs on the main menu to run when
you turn on your phone.
Reordering Main Menu
Changing Idle Screen Options
Two options from the main menu always appear on your idle screen above the
left and right option keys. Each option can be accessed by pressing the
corresponding option key.
1From thePersonalizescreen withMain Menuhighlighted, pressC
under SELECT to access theReorder Menuscreen.
2PressSto scroll to the main menu option you want to move.
3PressCunder GRAB.
4PressSto move the option up or down in the list.
5When the item is where you would like it to appear in the main menu,
pressCunder INSERT.
6Repeat step 2 through step 5 for all main menu items you want to move.
7PressCunder DONE. 
						

							160
90
nextel.com
Your phone arrives with Phonebook (PHBK) assigned to the left option key and
Messages (MESG) assigned to the right option key. You can assign any main
menu option you want to the option keys.
Changing Power-Up Program
Your phone is set to display the screen when it is powered on. You can set the
phone to display the main screen of any main menu option when it is powered
on.
1From thePersonalizescreen, pressRto scroll toKeys.
2PressCunder SELECT. TheKeysscreen shows the option assigned to
each option key (LeftandRight).
3To change the option assigned to the left option key, pressCunder
CHANGE whileLeftis highlighted.
4PressRto scroll to the option you want to assign to the left option key.
5PressCunder SELECT.
6To change the option assigned to the right option key, pressRto
highlightRightand pressCunder CHANGE. Repeat steps 4 and 5 for
the right option key.
1From thePersonalizescreen, pressRto scroll toPower Up App.
2PressBunder SELECT. ThePower Up Appscreen shows the name
of the program or screen that currently appears when the phone is
powered on.
3PressBunder CHANGE.
4PressRto scroll to the option you want to appear when the phone is
powered on.
5PressBunder SELECT. 
						

							161
Settings
Initial Setup
Initial Setup enables you to control a variety of your phone’sfeaturesthatyou
may want to modify when you first get your phone:
Time/Date Format—sets the format in which the time and date display
on your phone.
Ye a r—sets the current year.
NOTE: Changing the current year may affect stored Datebook events.
Datebook stores events 12 months ahead and one month before
the current date. Events outside this range will be deleted. See
“Datebook”on page 121 for more information.
Auto Redial—turns the automatic redial feature on and off.
Backlight—controls how long your phone’s backlight stays on.
Sensor- controls the photo sensor to activate the backlight when your
phone is in poor lighting conditions.
Sta tu s L i gh t—controls whether the status light is on when the phone is
on.
Display—controls the size of the text in the full-sized display screen.
Contrast—sets the display contrast lighter or darker.
Scroll—sets how you can scroll lists and menus.
Flip Activation—controls whether opening and closing your phone’s
cover answers and ends calls.
Language—sets the language that your phone displays.
Master Clear—returns all settings to their original defaults and erases all
stored lists. Use only under the direction of a Nextel Customer Care
Representative.
Feature Reset—returns all settings to their original defaults. Use only
under the direction of a Nextel Customer Care Representative.
Baud Rate—sets the baud rate at which your phone communicates when
connected to a laptop computer, PC, or similar device.
TTY Setup—sets TTY options. By default, your phone is set to function
with a TTY device.
TTY Baud Rate—sets the baud rate at which your phone communicates
when connected to a TTY device.
Alert Timeout- controls the amount of time the Call Alert tone sounds.
Return to Home- controls how long the Recent Calls screen displays
before returning to the idle screen. 
						

							162
90
nextel.com
Changing Time and Date Format
Your phone displays times in 12-hour-clock format (12:00 am through 11:59
pm) or 24-hour-clock format (0:00 through 23:59). It displays dates in month/
day format or day/month format.
NOTE: If you turn the time and date display off, no times are associated
with calls on your Recent Calls list or Voice Records, and the
alarm feature of your Datebook is disabled.
To set the time and date format, or turn time and date display on or off:
1From theInitial Setupscreen withTime/Date Formathighlighted,
pressCunder SELECT to access theTime/Date Formatscreen.
2To change the time format:
WithTime Formathighlighted, pressCunder CHANGE to access the
Time Formatscreen.
PressSto highlight the time format you want.
PressCunder SELECT.
3To change the date format:
PressSto highlightDate Format, and pressCunder CHANGE to
access theDate Formatscreen.
PressSto highlight the date format you want.
PressCunder SELECT.
4To turn the time and date format on or off:
PressRto highlightDisplay,andpressCunder CHANGE to access
theDisplayscreen.
PressSto chooseOfforOn.
PressCunder SELECT.