Mitel Sx 50 Dpabx Instructions Guide

Customer Data Entry Forms 
COMMAND IOO- SYSTEM OPTIONS PROGRAMMING 
- Register 01 SYSTEM MAINTENANCE 
r 
Automatic Diaanostics 
0 = Disable,- 1 = Enable 
RMATS Protocol Selection 
0 = CCllT, 1 = North American 
r Test Line Equipment Number 
001 + 160 
r 
Register 02 ATTENDANT FUNCTIONS 
Executive Busy Override (Console) 
0 = Disable 
- 1 = Enable Except on I/C Trunks, 
2 = Enable on all calls 
Console Inhibit 
- 0 = Disable 
1 = Enable 
102 2-6 Revision 0 9104-091-l 02-NA Issue 3 .:  

Customer Data Entrv Forms 
COMMAND 100 SYSTEM OPTIONS PROGRAMMING 
- Register 03 TONE AND RINGING CONTROL 
-Tone Plan Variants (0 = North American, 1 = Hong Kong 
2 = Taiwan) 
- Transfer Dial Tone (0 = Disable, 1 = Enable) 
- Ringing Cadence Cycle Time 
3 = 3 seconds 
4 = 4 seconds 
5 = 5 seconds 
abcdefghij 
0 3 0 
Default 
0 1 4 1 1 2 0 0 
L l- 
Discriminating Ringing 
- 0 = Disable, 1 = Enable 
l- 
Distinctive Callback Ringing 
- 0 = Disable, 1 = Enable 
-I- 
Disconnect Tone 
0 = Disable 
- 1 = Send...

Customer Data Entrv Forms 
COMMAND 100 SYSTEM OPTIONS PROGRAMMING 
Register 04 field values should not be changed. 
COMMAND 100 SYSTEM OPTIONS PROGRAMMING 
-Register 05 TRUNK CONNECTIONS 
- CO to CO Connection 
0 = Disable, 1 = Enable 
- E&M to E&M Connection 
0 = Disable, 1 = Enable 
- CO to E&M Connection 
0 = Disable 
1 = Enable for Incoming CO Trunks Only 
2 = Enable for Outgoing CO Trunks Only 
3 = Enable for Borh Incoming and Outgoing CO Trunks 
- Conference Warning Tone 
0 = Disable 
1 = Enable if...

Customer Data Entry Forms 
COMMAND 100 SYSTEM OPTIONS PROGRAMMING 
-Register 06 
STATION AlTRIBUTES 
r 
Station Switchhook-Flash Timing 
0=150-+750ms - 
1 = 150 - 1500 ms 
2 = Flash is Release 
3 = 90 ms Calibrated Flash 
- Station Digit Collection 
1 = 1opps 
2 = 20 pps 
Partial Flash Inhibit 
1 = Disable, 2 = Enable 
RESERVED 
r 
Register 07 SUPERSET TELEPHONE ATTRIBUTES 
-Auto-Answer 
0 = Disable, 1 = Enable 
-SUPERSET Auto-Hold 
0 = Disable, 1 = Enable 
I 7 Delayed Ringing Key Timeout 
l-u 3  2 1 =...

Customer Data Entry Forms 
COMMAND 100 SYSTEM OPTIONS PROGRAMMING 
- - Register 08 OVERFLOW CONTROL 
- - Overflow Mode in Day Service 
0 = Disable 
1 = Immediate Switching to Overflow - 
2 = Automatic Switching to Overflow after Time-out 
3 = Automatic Switching to Night Service 
- Overflow Mode in Night Service . 
abcdefghi 
0 8 
Default 2 0 3 2 0 0 0  O = Disable 
1 = immediate Switching to Overflow 
2 = Automatic Switching to Overflow after Time-out 
- Automatic Switch to Overflow Time-out 
(1 + 7) x...

Customer Data Entry Forms 
COMMAND 100 SYSTEM OPTIONS PROGRAMMING 
- Register 09 FEATURES SELECTION 1 
-Abbreviated Dial Enable 
l- L l- 
T- -I- -l- I 
II 
0 = Disable 1 = Enable 
- Last Number Redial # Key Access 
0 = Disable, 1 = Enable 
-Conflict Dialing Timer . 
I- 
0 = Disable 
1 = 3 seconds 
2 = 5 seconds 
3 = 7 seconds 
- Music on Hold 
0 = Disable, 1 = Enable 
-Background Music 
0 = Disable, 1 = Enable 
- Abbreviated Dial Access 
0 = 2 digit index number - 90 entries maximum 
1 = 3 digit index...

Customer Data Entrv Forms 
COMMAND 100 _ SYSTEM OPTIONS PROGRAMMING 
-Register 10 FEATURES SELECTION 2 
- Automatic Wajeup 
0 = Disable 
1 = Enable with Wake-up Tone 
2 = Enable with Music 
3 = Enable with Intercept to RAD 
-Automatic Wake-up Printout 
0 = Disable 
1 = Enable 
-Message Register Audit 
0 = Disable 
1 = Enable 
2 = Enable with Clearing of Message Registers 
- Use of Hash (#) for Trunks 
0 = Enable Tone-to-Pulse Override on Trunks 
1 = Enable End-of-Dial 
- Proportional Call Charging 
0. =...

Customer Data Entry Forms 
COMMAND 100 SYSTEM OPTIONS PROGRAMMING 
- Register 11 TIME-OUT SELECTION 
- Timed Recall - Camp-on (Trunks) 
(1 + 7) x 10 seconds 
- Timed Recall - No Answer 
(1 - 7) x 10 seconds - 
- Timed Recall - Call Hold (Extension) 
(1 -+ 4) x 1 minute 
- Timed Recall - Call Hold (Attendant) 
(1 - 7) x 10 seconds . 
Call Forward No Answer Timeout 
(1 -+ 7) x 10 seconds 
Drop Unanswered Trunks after 5 minutes 
0 = Disable, 1 = Enable 
- 
L 
- Register 12 MESSAGE WAITING 
- 
I- - Message...

Customer Data Entry Forms 
COMMAND 100 SYSTEM OPTIONS PROGRAMMING 
- -Register 13 AUTOMATIC ROUTE SELECTION (ARS) 
- ARS Enable 
0 = Disable, 1 = Enable 
- ARS Attendant Bypass 
0 = Disable, 1 = Enable 
- ARS Alarms 
0 = Disable, 1 = Enable 
- ARS Return Dial Tone 
0 = Disable, 1 = Enable 
- 
I 
I I I l- -L 1 T -L l- I 
- Expensive Route Warning Tone 
0 = Disable, 1 = Enable 
- Attendant ARS Routing Class of Service 
0 = ARS does not apply 
1 = RCS 1 
2=RCS2 
3=RCS3 
-ARS Interdigit Timeout 
0 = 5...

Customer Data Entry Forms 
COMMAND 100 SYSTEM OPTIONS PROGRAMMING 
1 Register 14 SYSTEM MESSAGE DETAIL RECORDING (SMDR) 
- SMDR System Enable 
0 = Disable 
1 = Enable Incoming Trunks Calls Only 
2 = Enable Outgoing Trunks Calls Only 
3 = Enable Both Incoming and Outgoing Trunk Calls 
- Record Meter Pulses 
0 = Disable, 1 = Enable 
- Local Call Indicator 
0 = Disable, 1 = Enable 
I Incoming Calls Record Only COs 
0 = Disable, 1 = Enable 
- Drop Calls of less than 8 digits 
0 = Disable, 1 = Enable 
- Drop...