Mitel Sx 50 Dpabx Instructions Guide

Customer Data Entry Forms 
COMMANDS 501 + 580 TRUNK PROGRAMMING 
TYPE: 
- Register 1 
- Trunk Group Membership (1 - 6 = Trunk GroupNumber) (0 = Incoming Calls Only) 
-Trunk Alarm Control (0 = Disable, 1 = Enable) 
- Trunk Hardware Type 
0 = Short Analog CO Trunk 4 = Satellite Tie Trunk 
1 = Long Analog CO Trunk 5 = Short Analog DID Trunk 
2 = Analog Toll Office Trunk 6 = Long Analog DIDTrunk ( 
3 = Analog Tie Trunk 
- Trunk Class of Service (1 - 9) 
- Inward Dial Delay before Answer (8 set) 
(0 =...

Customer Data Entry Forms 
COMMANDS 501 - 580 TRUNK PROGRAMMING 
TYPE: 
SLOT: 
- Register 2 
- Trunk Outpulsing Break/Make Ratio 
0 = 60140 
1 = 65135 
2 = 30120 
3 = 35115 
- Disconnect Supervision Guaranteed? 
0 = No, 1 = ?es 
- Disappearance of Reversal 
0 = is ignored 
1 = means disconnect 
- Reversal Meaning on Call Origination 
0 = Not Incoming Call 
1 = Incoming Call 
- Disconnect Timing 
0 = 60 ms 3 = 4.0 set 
1 = 500 ms 4=10.Osec 
2 = 1.5 set 5 = Disconnect Ignored 
Start Type (CO Trunks) 
0 =...

Customer Data Entry Forms 
COMMANDS 561 - 580 TRUNK PROGRAMMING 
TYPE: 
- Register 3 
Command a 
bl “I  - Tie Line Disconnect Timer 
0=150ms 
1 = 300 ms 
-E&M Lead Inversion 
Type 1 Type 5 
o= M-Lead None 
l= ‘Both E-Lead 
2= None M-Lead 
3= E-Lead Both 
l- 
-E&M Delay Dial Outgoing 
0 = Disable 
1 = Enable 
- E&M Wink Start Incoming 
0 = Disable 
1 = Enable 
-r 7 
- E&M Wink Start Outgoing 
0 = Disable 
1 = Enable 
RESERVED 
I I 
dlelflgl 
I Default 131112101010121 
102 2-62 Revision 0 9104-091-l 02-NA...

Customer Data Entry Forms 
COMMANDS 501 - 580 
TRUNK PROGRAMMING 
- Register 4 
TYPE: 
- Dictation Trunk (for LS/GS Trunks) 
0 = Disable 
1 = Enable 
- Inter-ringing Delay (for KS/GS Trunks) 
5 
- 4 
5 
- 4 
Default 4 
0 5 1001000* 3 - 9 seconds 
-Day Answer Mode 
Day Illegal Number Intercept (DID/DISA) 
0 = Direct-In Line 
1 = LDNl 2 = LDN2 
3 = LDN3 
- Day Answer Point (Day Answer Mode = 0) 
Day Inward Dial Trunk Intercept Answer Point (DID/DISA) 
000 = Night Bell 
001 -+ 160= Station Number 
161 +...

Customer Data Entry Forms 
COMMANDS 561 - 580 
TRUNK PROGRAMMING 
TYPE: 
Night answer Mode 
Night illegal Number Intercept (DID/DISA) 
0 = Flexible Night Service 
1 = LDN 1 
2=LDN2 
3=LDN 3 _ 
5 
Register 5 
-Night Answer Point (Night Answer Mode = 0) 
Night Inward Dial Trunk Intercept Answer Point (DID/DISA) 
000 = Night Bell 
001 - 160 = Station Number 
161 - 166 = Hunt Group Number 
167= Ring Group 
168= RMATS 
r 
DID Night Answer Point 
0 = Disable 
1 1 = Enable 
e f 
I I 
I I 
102 2-64 
Revision 0...

Customer Data Entry Forms 
COMMANDS 501 - 580 TRUNK PROGRAMMING 
- Register 6 
- DID Start Type 
0 = Immediate Start 
1 = Wink Stat-l 
2 = Delay Dial 
- 
RESERVED 
- Incoming Address Signalling 
0 = LoopDial Pulsing 
1 = Battery-and-Ground Pulsing 
2 = DTMF 
- N = Number of Digits Expected (1 - 9) 
- M = Number of Digits to be Absorbed (0 - 8) 
Digits to be Inserted 
5 6 
- 
5- 6 
Default 6 1 1 0 4 1 
TYPE: 
9104-091-l 02-NA Issue 3 Revision 0 l-02 2-65  

Customer Data Entry Forms 
COMMANDS 501 + 580 
TRUNK PROGRAMMING 
TYPE: 
r 
- Register 7 
-r 
- Incoming Seizure Debounce Timer 
(01 - 15) x 10 ms 
- WinkTimer 
(3 + 6) x 50 ms 
- Permanent-Signal Partial-Dial Timer 
.(I +6)x5s 
- DID Disconnect Timer 
(3-6)x50ms 
Release Acknowledge Timer 
002+12os 
l- 
a 1 b 1 c 1 d I e I f I g 
I h I i I 
5 
7 - 
5 - 7 
I Default I 7 I I I I I o I 4 I I I, I I I 
102 2-66 
Revision 0 
9104-091-l 02-NA Issue 3  

Customer Data Entrv Forms 
COMMAND 600 VERIFIED AUTHORIZATION CODE PROGRAMMING 
L I l- l- 
11 DEFAULT VALUES  - Register Number: 001 +.999 
- VAC Activation: 0 = Disable, 1 = Enable 
- CDS for Authorization Code 
0 = Disable, 1 -j 9 = COS 1 - 9 (for VAC) 
- ARS Routing Nilmber 
1 +3=ARSRCSl -3(forVAC), 
0 = Original RCS Number of Calling Device 
Authorization Code (1 to 8 digits) 
9104-091-102-NA Issue 3 
Revision 0 102 2-67  

Customer Data Entry Forms 
COMMAND 700 ARS DIGIT COMPARISON TABLE PROGRAMMING 
r 
Entry Number 
001 - 800 
r 
Time-of- Day Table Number 
01 -45 
[ 1 
[ . . 
1 
1 I 
1 1 
102 2-68 Revision 0 9104-091-l 02-NA Issue 3  

Customer Data Entry Forms 
COMMA-NDS 701 - 745 
ARS TIME-OF-DAY TABLE PROGRAMMING 
COMMAND 7 CO-MMAND 7 
- -. 
I- 
r 
a 
1 
1 
2 
- Period Number 
- Start Hour 
00 - 23 
- Start Minute 
00 + 59 
Route List 001 + 200, 
000 = not programmed 
RCS 1 Route List 
RCS 2 Route List 
RCS 3 Route List 
Ill I I I I I 
elf 1 al hl iI iI kl I Iml nl 
- Period Number 
- Start Hour 
00 - 23 
. 
- Start Minute 
00 - 59 
Route List 001 + 200, 
000 = not programmed 
RCS 1 Route List 
RCS 2 Route List 
RCS 3 Route List 
I...