Mitel Sx 200 Ml Pabx Lightware 16 Instructions Guide

Maintenance Log Functions 
Setting Automatic Printing 
Maintenance log entries may be printed without the need of a maintenance user to 
explicitly request printing using the “PRINT” command. Automatic printing eliminates 
the risk of losing maintenance log information because of overflow. When the 
maintenance log contains 7!j”h new (unprinted) log entries, the new entries are 
automatically printed. Once this initial 75% is printed, logs are printed frequently 
thereafter (usually four at a time). When...

RS-232 Maintenance Terminal 
6-6 Issue 1 
Revision 0 March 1997  

7 Diagnostic Functions 
Introduction 
7.1 The Diagnostics Level of operation is a conglomeration of active testing-related 
commands that are designed to assist the maintenance user ensure that the SX-200 
ML PABX is operating at peak performance. The available commands allow the user 
to enable, schedule, and initiate diagnostic testing, and to take equipment out of 
service and return it to service. All operations available in diagnostics, except 
CANCEL and ENTER, are shown in Table 7-i. The user can...

RS-232 Maintenance Terminal 
The Maintenance Manager 
7.2 The Maintenance Manager is a software program which manages the running of 
diagnostics on the SX-200 ML PABX. Its duties include the scheduling of tests, the 
invoking of tests, the logging of errors, and the removal of faulty devices from service. 
The Maintenance Manager tests devices one at a time from one of six prioritized 
queues. The priority scheme of the queues is as follows, in ascending order: 
l Background diagnostic queue 
l Power-up...

Diagnostic Functions 
For a Specific Circuit 
The user may enable power-up diagnostics for a specific circuit by pressing the fol- 
lowing softkeys: 
MORE-KEYS 
ENABLE-DIAG 
POWER-UP 
BAY/SLOT/CCT 
(enter the required bay, slot, circuit, and sub-circuit numbers; pressing the 
RETURN key after each) 
ENTER 
Table 7-l Diagnostics Level Functions 
LEVEL COMMAND SUBCOMMAND PARAMETER QUALIFIER QUALIFIER QUALIFIER 
3.DIAGNOSTICS 1 -TEST 1 -BAY/SLOT/CCT 
2.DEVICE-TYPE I-ONS 
2-LS/GS-TRUNK 
I 1 3-RECEIVERS 
I I...

RS-232 Maintenance Terminal 
Table 7-l Diagnostics Level Functions (continued) 
LEVEL COMMAND SUBCOMMAND PARAMETER QUALIFIER QUALIFIER QUALIFIER 
9.EM 
O-MORE-KEYS 1.cov 
1 2.LINK/CHANNEL 1 
3-DID 
4.OPS 
6.DNIC 
1 9.TimTRUNK 
I 
O-MORE-KEYS 
I 1 3.m-NUM 
1 3.DIAGNOSTICS 1 O-MORE-KEYS 1 2-ENABLE-DIAG 1 2-POWER-UP 1 l-BAY/SLOT/C-CT 1 
I I 
1 2.DEVlCEmlYPE 1 1.ONS 
I I 
2-LSIGS-TRUNK 
3.RECEIVERS 
4.JUNCTOR 
7-CONSOLE 
S-DSP 
g-EM 
O-MORE-KEYS I -cov 
2.LINK/CHANNEL 
I 1 3.DID 
I 4.OPS 
&DNlC 
9.Tl-TRUNK...

Diagnostic Functions 
Table 7-l Diagnostics Level Functions (continued) 
Page 3 of 3 
For a Specific Extension 
To enable power-up diagnostics for a specific extension number, press the following 
softkeys: 
MORE-KEYS 
ENABLE-DIAG 
POWER-UP 
EXT-NUM 
(enter the required extension number; then press the RETURN key) 
ENTER 
For a Specific Device Type 
To enable power-up diagnostics for a specific device type, press the following softkeys: 
MORE-KEYS 
ENABLE-DIAG 
POWER-UP 
DEVICE TYPE 
(press one of the...

RS-232 Maintenance Terminal 
Table 7-2 Device Types 
Softkey 
Meaning 
ONS ONS line card 
LWGS TRUNK LS/GS trunk card 
RECEIVERS DTMF receiver module 
CONSOLE Attendant console 
DSP Digital signal processor 
1 EM 1 E&M trunk module 
I 
1 cov COV line card 
DID trunk card 
OPS line card 
DNIC Digital line card 
1 LINK/CHANNEL 1 PCM Channels 
Tl-TRUNK Ti trunk card 
In all cases, the system echoes the command 
into the Applications Area of the screen. The user may 
verify that the particular power-up...

Diagnostic Functions 
For a Specific Circuit 
To disable power-up diagnostics for a specific circuit, press the following softkeys: 
MORE-KEYS 
DISABLE-DIAG 
POWER-UP 
BAY/SLOT/CCT 
(enter the required bay, slot, circuit and sub-circuit numbers; pressing the RETURN 
key after each) 
ENTER 
For a Specific Extension 
To disable power-up diagnostics for a specific extension number, press the following 
softkeys: 
MORE-KEYS 
DISABLE-DIAG 
POWER-UP 
EXT-NUM 
(enter the required extension number; then press...

RS-232 Maintenance Terminal 
For an Entire Peripheral Card 
7-8 To enable background diagnostics for an entire peripheral card, press the following 
keys: 
MORE-KEYS 
ENABLE-DIAG 
BACKGROUND 
BAY/SLOT/CCT 
(enter the required bay; press the RETURN key; enter the required card slot 
number; press the RETURN key three times) 
ENTER 
For a Specific Circuit 
To enable background diagnostics for a specific circuit, press the following softkeys: 
MORE-KEYS 
ENABLE-DIAG 
BACKGROUND 
BAY/SLOT/CCT 
(enterthe...