Mitel SX 200 DIGITAL Pabx General Descriptions Manual

Data Features
- press CANCEL key at console
or,
- press CANCEL softkey at a SUPERSET telephone
or,
- press BACK TO HELD sof-tkey at a SUPERSET4DN telephone
or,
- flash the hook switch at a SUPERSET telephone, a SUPERSET3DN tele- -phone, or an industry-standard telephone
External ADL Modem Pooling Call
0Dial the ADL access code
lDial the Modem Pool access code, unless the default modem pool is to be
used.
lDial the external destination (dial the ARS leading digit string and the des-tination number)....

Features Description
lDID trunk callers cannot queue. They receive busy tone unless an answer-
point is programmed in the Call Rerouting table for DID Recall Points onBusy.
lDIL trunks can queue for a modem pool hunt group, dataset, or Data Hunt
Group, but they receive 
ringback tone, not busy.
lTrunk callers have higher priority than internal callers for queuing.
ProgrammingEnable COS Option 900 (Data Station Queuing) in the caller’s Class ofService.Operation
Operation varies depending upon the modem...

7. MAINTENANCE FEATURES7.1 All features provided by the 5X-200 DIGITAL PABX which apply to Mainte-
nance are described in the following paragraphs. Maintenance functions are
performed at the RS-232 Maintenance Terminal, which can be any RS-232
80-character terminal. It is recommended that a terminal capable of inter-
preting the ANSI special character set be used.
Information presented on the maintenance terminal CRT includes:
l system date, system time
0 current system alarm level
l system...

Features DescriptionConditions
None
ProgrammingNoneOperation
NoneAlarm 
LEDs
Description7.3 All SX-200 DIGITAL PABX peripheral cards (lines, trunks, receivers, etc.)
have one red alarm LED, which is illuminated if a diagnostic test fails on the
card, or if the card is installed in a wrong or non-programmed card slot.Conditions
None
ProgrammingNoneOperation
None
Alarm Status Display
Description7.4 The maintainer can display the system alarm levels either in their entirety,
or divided into their separate...

Maintenance FeaturesConditions
None
ProgrammingProgram the system configuration in CDE Form 01 (System Configuration).Operation
Refer to Practice 9109-094-351-NA, RS-232 Maintenance Terminal.
Copy Database.Description
7.6 The maintainer can make a backup copy of the system database diskettes
using the system’s floppy disk drives.Conditions
The new diskette must already contain the system software.
If the system software on the new diskette is of a different version than that
on the original diskette, the...

Features DescriptionConditions
None
ProgrammingNone
OperationRefer to Practice 
9109-094-351-NA, RS-232 Maintenance Terminal.
Device Status Report
Description7.9 The maintainer can display the status of any peripheral circuit or circuits
by entering a command at the maintenance terminal. The information dis-
played includes: circuit location, circuit type, call processing state and mainte-
nance state.Conditions
None
ProgrammingNone
OperationRefer to Practice 
9109-094-35l-NA, RS-232 Maintenance...

Maintenance Features
Remote Maintenance Administration and Test (RMATS) Access
Description7.11 The RMAT System allows personnel at maintenance centers (off-user
premises) to access the 
%-2&I DIGITAL PABX to obtain maintenance data or
to make programming changes. It provides a means to identify alarm condi-
tions and to perform Customer Data Entry without visiting the user’s prem-
ises.
Referto Practice 9109-094-351-NA, RS-232 Maintenance Terminal for infor-
mation on setting up a remote...

Features Description
Show, Set System TimeDescription
7.14 The maintainer can show and set the system time from the maintenance
terminal.Conditions
Changing the system time can affect ACD timing for calls currently in an ACD
path.
ProgrammingIn CDE Form 04 (System Options/System Timers) program System Feature 01
(24-Hour Clock) to select either a 12-hour and a 24-hour clock.Operation
Refer to Practice 9109-094-351-NA, RS-232 Maintenance Terminal.
System Logging Facility
Description7.15 The SX-200 DIGITAL...

Maintenance Features
FunctionAccess Code
Test Junctor (PCM Path)85 (TJ)
Direct Trunk Select38 (DT)
Test Printer
87 (TP)
Dump Logs35 (DL)
Copy Data base23 (CD)
Refer to Practice 
9109-094-353-NA, Maintenance Information for additionalinformation.
Conditions
There must be a line card in Bay 2, Slot 1. Circuit 1 is the Test Line.
ProgrammingAssign an access code to Feature 18 (Maintenance Functions -Test Line).
OperationPractice 
9109-094-353-NA, General Maintenance Information, details the
operation of the...

APPENDIX A. GLOSSARY OF SX-200 DIGITAL TERMS
A.1 This glossary is intended to assist personnel in becoming familiar with the
terms used in the 
SX-200 DIGITAL PABX. It is not a complete listing, as many
of the more well known 
ierms already exist in various specifications, MITEL
Practices, and similar documents.
ABH
See Average Busy Hour
ABSBH
See Average Busy Season Busy Hour
AID
See Analog/DigitalADL
Associated Data Line
AIOD
Automatic Identified Outward Dialing
ASCII
American Standard Code for...