Mitel SX-200 DIGITAL Pabx General Description Manual

Features Description 
5.39 ORIGINATE ONLY 
Description 
An extension with this Class Of Service (COS) option may originate 
calls, but cannot receive any calls dialed to its number unless they are 
forwarded from another extension. Calls dialed to this extension are 
intercepted and routed to the programmed rerouting point or are given 
reorder tone. 
Conditions 
An extension with this COS option may receive calls via Call Forward- 
ing (unless Never a Forwardee is selected in its COS). 
An Originate...

Features Description 
5.40 OVERRIDE SECURITY 
Description 
This option provides an extension with security against Executive Busy 
Override (see ATTENDANT BUSY OVERRIDE in this Practice, and 
“Override” in Sections MITL9108-093-106-NA, SUPERSET 3TM Set, and 
MITL9108-093-107-NA, SUPERSET qTM Set). 
Conditions 
The Attendant or a SUPERSET@ Set user can override an extension 
with Executive Busy Override in its COS. 
Programming 
Select COS Option 238 (Override Security) for the extension. 
Operation 
None...

Features Description 
5.41 PAGING ACCESS 
Description 
An extension can be permitted to access the paging equipment by 
dialing the required access code. Access may be restricted to any of 
the nine zones-depending upon the access code dialed. If an extension 
tries to access busy paging equipment, busy tone is returned. 
Conditions 
Camp-On or Automatic Callback - Busy may not be activated on busy 
paging equipment. 
Any extension paging announcement may be overridden by the Atten- 
dant. 
Paging...

Features Description 
5.42 PRIORITY DIAL 0 
Description 
A Priority Dial 0 call can be programmed to appear at the console as a 
special softkey prompt. This will indicate to the Attendant that a prior- 
ity call requires assistance. 
Priority Dial 0 calls may be routed to any valid answering point. 
Conditions 
None 
Programming 
“Priority 0” must be programmed into the console’s LDN form (and 
given an access code) via CDE Form 08 (Attendant LDN Assignments). 
Priority Dial 0 Routing must be programmed...

Features Description 
5.43 PRIVACY DISABLE 
Description 
This feature, when selected, will permit the extension user of a SUPER- 
SET@ key line to barge in on (override) the key line in use by the 
SUPERSET’ user. Also, the SUPERSET@ user will not be permitted to 
override the key line when it is in use by the extension user. When the 
feature is not selected, the extension user of the SUPERSET@ key fine 
will be prevented from overriding the key line when in use by the 
SUPERSET@ user. Reorder tone is...

Features Description 
5.44 RECEIVE ONLY 
Description 
An extension with this COS option may receive calls but cannot origi- 
nate calls. The extension may, however, originate calls and select 
features specified in its COS after having received a call, and placed 
the call on hold by flashing. 
Conditions 
If illegal calls are routed to the Attendant via CDE Form 19 (Call 
Rerouting Table), the extension will be forwarded to the Attendant if it 
goes off-hook to dial. 
If used in conjunction with the...

Features Description 
5.45 TRANSFER/CONSULTATION HOLD/ADD-ON 
Description 
This feature allows an extension user on an established call to hold the 
call, add a third party to the call, or transfer the original call to a third 
party. By programming selected options, the feature may be restricted 
on the basis of the type of the second party in the call. 
Conditions 
This feature is mutually exclusive with CQS Options 203 (Broker’s Call), 
224 (Flash for Attendant) and 223 (Flash Disable). 
The number of...

Features Description 
Operation 
On an established call: 
Flash the switchhook - dial tone is returned; the first party is in 
consultation hold, and will hear music if provided. 
Dial the number of the destination extension (the second party) 
- ringing tone or busy tone is returned. 
When the second party answers - a private conversation is 
possible. 
Flash the switchhook - a 3-party call is established. 
Replace the handset - the held call is transferred to the called 
extension. 
When the original...

Features Description 
5.46 TRANSFER DIAL TONE 
Description 
Selection of this option return c transfer dial tone in place of regular 
dial tone when the extension flashes the switchhook to place an 
established call on Hold in order to Consult or Transfer the call. 
Regular dial tone is 350/440 Hz continuous tone; Transfer Dial tone is 
350/440 Hz, three bursts of 100 ms on, 100 ms off, followed by 
continuous tone. 
Conditions 
None 
Programming 
Select CO9 Option 249 (Transfer Dial Tone) for the...

Features Description 
5.47 TRANSFER WITH PRIVACY 
Description 
An extension user can converse privately with two extension users 
(one at a time) and then connect them by hanging up. 
Conditions 
An extension with Transfer with Privacy may access the Call Hold, Call 
Hold and Retrieve, and Paging features after flashing a call. 
The transferring extension may only talk to one of the other extensions 
at a time. 
COS Options 250 (Transfer with Privacy) is mutually exclusive with the 
following options:...