Mitel SX-200 DIGITAL Pabx Engineering Information Manual

W-232 Maintenance Terminal 
Figure 6-l Example of LOGS READ Display 
4:27 7-AUG-86 alarm status = MINOR 
SX-200 DIGITAL GENERIC 1001 480P/B46.5 19-AUG-1986 Logs 
1985-JUN-21 15:33?01 ONS card failed at lot 02 01 00 00 
OFF hook too long Error number = 17 
1985-JUN-21 11:11:19 
COV card failed at lot 03 03 00 00 
SS4 unplugged Error number = 21 
1985-JUN-2 1 09:23:25 Tot alarm went from No Alarm to MINOR 
Alarm level change due to Bay 03 trunks 
1985-JUN-21 09:23:25 
trunk card failed at lot 03 09 00 00...

W-232 Maintenance Terminal 
DELETING LOG ENTRIES 
All Log Entries 
6.06 To delete all of the maintenance log entries, press the following 
softkeys: 
DELETE 
ALL 
ENTER 
CONFIRM 
ENTER 
Newest Log Entries 
6.07 To delete the newest user-defined number of maintenance log 
entries, press the following softkeys: 
DELETE 
NEWEST 
(enter the number of log entries to be deleted) 
ENTER 
Oldest Log Entries 
6.08 To delete the oldest user-defined number of maintenance log 
entries, press the following softkeys:...

RS-232 Maintenance Terminal 
Newest Log Entries 
6.10 To print the newest user-defined number of maintenance log 
entries, press the following softkeys: 
PRINT 
NEWEST 
(enter the number of log entries to be printed) 
ENTER 
Oldest Log Entries 
6.11 To print the oldest user-defined number of maintenance log 
entries, press the following softkeys: 
PRINT 
OLDEST 
(enter the number of log entries to be printed) 
ENTER 
In all cases, the system will echo the command into the Applications 
Area of the...

RS-232 Maintenance Terminal 
entries. To initiate the automatic printing of logs, press the following 
softkeys: 
SET 
AUTOPRINT 
ON 
ENTER 
The system will echo the command into the Applications Area of the . 
screen. 
Page 6-616  

RS-232 Maintenance Terminal 
7. DIAGNOSTIC FUNCTIONS 
7.01 The Diagnostics Level of operation is a conglomeration of ac- 
tive testing-related commands that are designed to assist the 
maintenance user in ensuring that the SX-200@ DIGITAL PABX is op- 
erating at peak performance. The available commands allow the user 
to enable, schedule and initiate diagnostic testing, and to take equip- 
ment out of service, and return it to service. 
introduction 
7.02 
1. 
2. 
3. 
4. 
7.03 Four types of diagnostics...

RS-232 Maintenance Terminal 
prioritized queues. The priority scheme of the queues is as follows, in 
ascending order: 
8 
Background diagnostic queue 
8 
Power-up diagnostic queue 
8 
Power-up diagnostic retry queue 
8 
Diagnostic second-chance queue 
8 
Diagnostic second-chance retry queue 
l User (directed diagnostic) queue. 
For further information on diagnostics, refer to Section 
MlTL9108-093-353-NA, General Maintenance Information. To access 
the diagnostic level commands, press the DIAGNOSTICS...

- 
RS-232 Maintenance Terminal 
pressing the RETURN key after each one) 
ENTER 
For a Specific Extension 
7.08 The user may enable power-up diagnostics for a specific ex- 
tension number by pressing the following softkeys: 
MORE-KEYS 
ENABLE-DIAG 
POWER-UP 
EXT-NUM 
(enter the required extension number, then press the RETURN 
key) 
ENTER 
For a Specific Device Type 
7.09 The user may enable power-up diagnostics for a specific device 
type by pressing the foilowing softkeys: 
MORE-KEYS 
ENABLE-DIAG...

RS-232 Maintenance Terminal 
DlSABLiNG POWER-UP DIAGNOSTICS 
For an Entire Bay 
4.11 The user may disable power-up diagnostics for an entire bay by 
pressing the following softkeys: 
MORE-KEYS 
DISABLE-DIAG 
POWER-UP 
BAY/SLOT/CCT 
(enter the required bay number, then press the RETURN key four 
times) 
ENTER 
For an Entire Peripheral Card 
7.12 The user may disable power-up diagnostics for an entire pe- 
ripheral card by pressing the following keys: 
MORE-KEYS 
DISABLE-DIAG 
POWER-UP 
BAY/SLOT/CCT...

RS-232 Maintenance Terminal 
For a Specific Extension 
7.14 The user may disable power-up diagnostics for a specific ex- 
tension number by pressing the following softkeys: 
MORE-KEYS 
DISABLE-DIAG 
POWER-UP 
EXT-NUM 
(enter the required extension number, then press the RETURN 
key) 
ENTER 
For a Specific Device Type 
7.15 
7.16 The user may disable power-up diagnostics for a specific de- 
vice type by pressing the following softkeys: 
MORE-KEYS 
DISABLE-DIAG 
POWER-UP 
DEVICE TYPE 
(press one of the...

RS-232 Maintenance Terminal 
For an Entire Peripheral Card 
7.18 The user may enable background diagnostics for an entire pe- 
ripheral card by pressing the following keys: 
MORE-KEYS 
DISABLE-DIAG 
POWER-UP 
BAY/SLOT/CCT 
(enter the required bay; press the RETURN key; enter the re- 
quired card slot number: press the RETURN key three times) 
ENTER 
For a Specific Circuit 
7.19 The user may enable background diagnostics for a specific 
circuit by pressing the following softkeys: 
MORE-KEYS 
ENABLE-DIAG...