Minolta magicolor 2200 User Manual

Time-of-Day Clock (Standard on Models EN and DP) 131
3Attach the time-of-day clock 
to the controller board.
Attention
Make sure that the pins on the time-of-day clock are properly aligned with 
those in the receiving socket on the controller board. Damage to the time-of-day 
clock and/or controller board could result if the pins are misaligned.
aLocate the time-of-day clock socket on the controller board and the pin 1 notch or 
printed label.
bLocate the pin 1 indicator mark on the top of the...

Time-of-Day Clock (Standard on Models EN and DP) 132
7Reconnect the power cord and turn on the printer.
5In compliance with UL guidelines, “The appliance inlet is considered to be the main 
disconnect device.”
8Print a startup page. 
The time-of-day clock is not listed under “Installed Options” on the startup page, 
but the time will appear as System Date in the Printer Information column.
Downloaded From ManualsPrinter.com Manuals 

6
Color Printing
Downloaded From ManualsPrinter.com Manuals 

Introduction 134
Introduction
Your magicolor 2200 features advanced color laser technology that produces inexpensive 
and durable color prints at 600x600, and 1200x1200 dpi on plain paper, envelopes, labels, 
thick stock, and transparencies.
Color Management and Control
The magicolor 2200 offers a host of color screening, matching, and calibration tools for 
both the beginner and professional color user.
MINOLTA-QMS QCOLOR Technology
Color management does not mean all devices will match exactly. It does...

Introduction 135
„Single-button control:
 Whether accessing through the printer driver, or from the 
printer’s front panel, MINOLTA-QMS Q
COLOR’s single-button controls enable auto-
matic correction of uncalibrated RGB or CMYK color files.
„Printer-resident CMS:
 Because MINOLTA-QMS QCOLOR automatic color correc-
tion is built into the printer, it works well in all computing environments and with 
most design, publishing, and office applications.
„Industry-standard profiles:
 QCOLOR uses...

Downloaded From ManualsPrinter.com Manuals 

7
Repacking the Printer
Downloaded From ManualsPrinter.com Manuals 

Storing the Printer 138
Storing the Printer
Keep the following in mind when storing the printer for an extended period:
1Unplug the printer.
2Remove the OPC drum, the fuser oil roller, and toner cartridges from the printer and 
return them to their original packaging. If the original packaging is not available, 
protect the toner cartridges from spilling toner, and protect the OPC drum cartridge 
from damage and light.
Relocating Your Printer
Occasionally, you may have to move your printer to a different...

Repacking the Printer 139
Repacking the Printer
If you need to relocate or ship your printer after it’s been installed, follow the procedures 
in this chapter to prevent damage to the printer and to keep your warranty valid.
5If you’re returning just the printer for service, do not return the interface cables, power 
cable, documentation, media tray(s), or accessories.
Attention
MINOLTA-QMS cannot be held responsible for damage to your printer during 
shipment that results from the improper packaging of...

Repacking the Printer 140
7Remove the duplex unit (if attached).
8Remove the 5-bin mailbox (if attached).
9Remove the lower input feeder (if attached).
10Repack the printer for shipment.
Attention
To avoid toner contamination during shipment, the printer should be repacked 
without the fuser oil roller, toner cartridges, waste toner pack, OPC drum 
cartridge, or transfer belt installed.
Remove the Cables 
1Turn off the printer.
2Remove the power cable and all interface cables.
Remove the Fuser Oil...