Minolta Di450 User Manual

3-38
6. Selecting the Original Copy Type
Making Copies
Chapter 3
Selecting the Original Copy Type
Load the originals.
Select the original type.
Select the desired copy type.

 Touch [4in1/Booklet]. Select the desired copy type and touch
[Enter].
[Original Direction] key
Use this key when you want to place your original
in a direction other than the standard.
Touch [Original Direction].
Select the position of the original.
To u c h [ E n t e r ] .
Using Single-Sided or Double-Sided
Originals


1
2...

3-39
6. Selecting the Original Copy Type
Making Copies
Chapter 3
[Margin] key for the original:
When youre going to make copies using Single-
Sided Double-Sided or Double-Sided Single-
Sided, first check to see if your original has a file
margin in it. The machine can correct the margin
position to make good copies as long as you
instruct it properly.
Touch [Margin].
Select the desired margin position.
You have a choice of the following two
Margin Positions.Hold down [

]or[
] until the desired
margin...

3-40
6. Selecting the Original Copy Type
Making Copies
Chapter 3
Place the original.
Touch [Book].
Touch [Standard Book] or [Right Bound].
Touch [Separation] or [Spread].If you want to erase the four edges or center,
touch [Book Erase].
Useful Tip
You have a choice of the following three types of
erase:
Using a Book as original
1
2
4003P056CA
3
4003P057CA
4
4003P058CA
5
4003P059CA
 Frame + Center Erase
Erase a given width along the four edges
and down the center.
1149O057AA
FrameErase
Erase a given...

3-41
6. Selecting the Original Copy Type
Making Copies
Chapter 3
Select the particular erase function from
among the three options available.
Hold down [

]or[
] until the desired erase
width is reached. Then, touch [Enter].
NOTES
 You can change the frame erase width in 1/16
increments within the range 1/4 to 3/4.
 The center erase width has been set to 1/2.
Touch [Enter].
Touch [Single-Sided] or [Double-Sided]
under Copy.
NOTE
When Book is used to make copies from, none of
2in1, 4in1, and Booklet is...

3-42
6. Selecting the Original Copy Type
Making Copies
Chapter 3
Some Precautions for Making Copies
 Place the open book so that its top edge is at the rear of the machine and the center of the book is
aligned with the Book Marker indicated on the Original Length Scale.
 Make copies in descending order of page.
 Select the desired zoom ratio and paper size.
 When 2in1, 4in1, or Booklet function is selected, the machine automatically selects a default zoom
ratio. You can, however, choose another zoom...

3-43
6. Selecting the Original Copy Type
Making Copies
Chapter 3
Handy Feature Available from Initial Mode Setting
The initial setting for the original copy type is 1-Sided 1-Sided. If this setting is changed to 1-
Sided 2-Sided or 2-Sided 2-Sided, the Basic screen shows a [1-Sided 1-Sided] key.
Useful Tip
User’s Choice can be used to change the settings of initial mode.p. 5-12



 





4003P067CA
Touch this key to simply set the 1-Sided 1-
Sided mode.


Downloaded From ManualsPrinter.com Manuals 

3-44
Making Copies
Chapter 3
7. Selecting the Density
Image Density
When you touch [Density] on the Touch Panel, a screen appears that allows you to set the exposure level
for the image density.
Density offers a choice of [Text], [Text/Photo], or [Photo]. Select one according to your needs.
Useful Tips
 Touching [Auto] automatically selects [Text].
 The machine has been factory-set to automatically select the Auto Exposure mode. User’s Choice can
be used to change this default setting to the Manual...

3-45
7. Selecting the Density
Making Copies
Chapter 3
Select Text/Photo when you make copies from an
original that contains both text and photos.
Touch [Text/Photo].
[Text/Photo] is highlighted, indicating that
the machine is set into the Text/Photo mode.
Touch [Lighter] or [Darker] as necessary.
NOTE
In the Text/Photo mode, the machine defies
automatic adjustments of the exposure level. Be
sure to manually adjust the exposure level as
necessary before making the copy.
Useful Tips
 To make the image...

3-46
Making Copies
Chapter 3
8. Auxiliary Functions
When [Auxiliary] on the Touch Panel is touched, the Auxiliary function menu screen appears allowing
you to set the various auxiliary functions.
Cover
The Cover mode lets you make a front cover or a front and back cover for a copy set by copying the first
page or the first and last page of an original set on different paper from the normal paper, such as color
paper.
There are six different Cover functions available. Select the appropriate one according...

3-47
8. Auxiliary Functions
Making Copies
Chapter 3
Load the originals.
NOTE
If you place your original directly on the
Original Glass, you need to set Separate
Scan.
p.3-67
Touch [Cover].
Select the key for the front cover.Select the key for the back cover.
Load the paper for the cover (e.g., color
paper) into the drawer.
Useful Tip
You can use the Multi Bypass Tray as the paper
source of the cover paper. The tray, however,
accepts the following paper size only: X, 7-1/4 to
17 and Y, 5-1/2 to 11-3/4....