Minolta Di450 User Manual

3-18
4. Selecting the Zoom
Making Copies
Chapter 3

Touch [Custom Zoom].
Touch [Input].
Enter the zoom ratio from the 10-Key Pad.
Useful Tips
Example:×1.300
Press 1, 3, 0, and 0, in that order, from the 10-
Key Pad.
 To correct a ratio, press the Clear key and then
enter the correct one again.
 The zoom ratio can be set in the range
×0.250
to
×4.000 when the copy is made through the
Original Glass and
×0.250 to×2.000 when the
Electronic Document Handler is used.
Touch memory location key [1] or [2],...

3-19
4. Selecting the Zoom
Making Copies
Chapter 3

Touch [Custom Zoom].
Touch [X/Y Zoom].
Touch [Input].Touch [X] or [Y] to enter the desired zoom
ratio from the 10-Key Pad.
Touch memory location key [1], [2] or [3] in
whichtostorethesetzoomratio.
* When the key is touched, the ratio is shown
on the key, indicating that it has been stored in
memory.
NOTES
 When a new ratio is stored, the old one is
erased.
 When the Hard Disk Drive Kit is mounted and
“100 Accounts” is selected for “Copy Track”
of...

3-20
Making Copies
Chapter 3
5. Selecting the Finishing
When you touch [Finishing] after touching [Basics] on the Touch Panel, a screen appears that allows you
to set a particular finishing function.
Finishing Functions
4003P541EA
4002O055AA
Non-Sort
 All copies are fed out without being sorted,
grouped, stapled or punched.
 Touch [Non-Sort].
NOTE
Thick paper and OHP transparencies cannot be
used for making copies in Staple, Punch and/or
Folding.
Orig.
Copy
4002O056AA
Sort
 This function is effective...

3-21
5. Selecting the Finishing
Making Copies
Chapter 3
Useful Tip
The machine has been factory-set to automatically switch between Sort and Non-Sort depending on the
number of originals and the number of copies to be made when the Electronic Document Handler is
used. It has also been set to automatically select Non-Sort in the initial mode. These default settings can
still be changed by using User’s Choice.
p.5-14
4002O058AA
Staple

 This function is effective when making multiple
copies from multiple...

3-22
5. Selecting the Finishing
Making Copies
Chapter 3
Selecting the Finishing Function
Touch the desired finishing function key.
NOTES
 When either the Finisher FN-105, Finisher FN-
106, or Mailbin Finisher is mounted, copies are
fed out in a sawtooth manner in Sort or Group
mode. When the Finisher FN-5 is mounted, or
when neither a Finisher nor a Mailbin Finisher
is mounted, copies are fed out in a crisscross
manner in Sort or Group mode.
 Crisscross sorting is possible only when all of
the...

3-23
5. Selecting the Finishing
Making Copies
Chapter 3

Touch the desired finishing function key and
then touch [Hole Punch].


NOTES
Papersize
Fi n i s h e r FN - 5 :1 1
×17L to Letter
Finisher FN-105 :11
×17L to Letter
Mailbin Finisher :11
×17L to Letter
 Hole Punch is not possible in the Interrupt
mode.
 When making copies in the Hole Punch mode,
make sure to load the originals into the
Electronic Document Handler or place the
Originals on the original Glass in the correct
direction.

p.3-33


...

3-24
5. Selecting the Finishing
Making Copies
Chapter 3
[Select Position] key:
Use this key when you want to place your original
in a direction other than the standard or make
punch holes in positions other than those made
automatically.
Touch [Select Position].
Touch the desired hole-punching position.
To u c h [ E n t e r ] .
Touch the desired finishing function key.
Touch the stapling key of your choice.
You have a choice of the following two stapling
types.
* When you touch a stapling key in the...

3-25
5. Selecting the Finishing
Making Copies
Chapter 3
Touch [Select Position].
NOTE
The stapling position cannot be specified if
Corner Staple is selected. It can, however, be
specified if Corner Staple is combined with Hole
Punch.
Touch the desired stapling position on the
Touch Panel.
Touch [Enter].
NOTES
 Stapling is not possible in the Interrupt mode.
 Note the correct direction of the originals when
making copies in the Sort Staple mode.

p.3-32
 Note the position at which the copy set or...

3-26
5. Selecting the Finishing
Making Copies
Chapter 3

Open Staple Tray Cover [FN10].
Align the sheets of paper neatly.
Insert a neat stack of paper face down into
the Staple Tray.
NOTES
 Make sure of the stapling position and press the
paper stack against the end bracket.
 Up to 50 sheets of plain paper can be stapled.Slide the Paper Guide Plate to the size of the
paper.
NOTE
Make sure that the Paper Guide Plates are in
touch with the edge of the paper stack.
CloseStapleTrayCover[FN10].
After you...

3-27
5. Selecting the Finishing
Making Copies
Chapter 3
You have a choice of the following three stapling
positions.
Press the key. This staples the copy
stack or set.
Useful Tip
This feature is useful for stapling originals after
making copies.
Open Staple Tray Cover [FN10] and remove
the stapled paper stack.
Close Staple Tray Cover [FN10].
Paper size : 11×17L to Letter
Number of sheets : 2 to 50
4002O094AA
4002O095AA
Paper size : 11×17L to Letter
Number of sheets : 2 to 50
4002O096AA
Paper size : 11...