Minolta Di450 User Manual

2-8
Getting to Know Your Machine
Chapter 2
3. Machine Parts and Accessories
Machine Parts and Accessories
Machine
4002O109AB
1234567
8
91011
12
Exit Tray Extender : Slide this extender out when producing printed pages on large-size
paper.
Exit Tray : Holds printed pages fed out of the machine.
Upper Left Door : Open to perform the following job.
When the Message “Misfeed detected.” Appears
 p.6-14
Front Door : Open to perform the following jobs.
Replacing the Toner Bottle
 p.6-6
When the Message “Misfeed...

2-9
3. Machine Parts and Accessories
Getting to Know Your Machine
Chapter 2
Inside the Machine
4002O111AB
123
4
5
678
9
Toner Bottle Holder : Swing open to replace the Toner Bottle.
 p.6-6
Toner Bottle : Contains toner. Replace it with a new one when the warning message
tells you to.
 p.6-6
Original Width Scale : Press your original up against this scale for correct alignment.
Original Length Scale : Press your original up against this scale for correct alignment.
Original Glass : The image of the...

2-10
3. Machine Parts and Accessories
Getting to Know Your Machine
Chapter 2
Options
4002O112AB
4002O117AC
4002O115AA 4002O113AC
4002O114AB
1
23
4
5
6
7
8
9
10
111213
14
15
16
17
18
Downloaded From ManualsPrinter.com Manuals 

2-11
3. Machine Parts and Accessories
Getting to Know Your Machine
Chapter 2
Original Cover
Original Pad : Holds the original placed on the Original Glass in position.1
Electronic Document Handler EDH-3
Document Handling
Tray: Load the originals face up on this tray.
 p.3-5
Document Guide Plate : Slide the plate as necessary to the size of the originals.
 p.3-5
Single Feed Tray : Insert a single sheet of original into the tray to make a copy or copies of it.

 p.3-82
3
4
Large Capacity Cassette C-306...

2-12
3. Machine Parts and Accessories
Getting to Know Your Machine
Chapter 2
Options
4002O119AB
4002O117AC
4002O116AA
19
20
2122
23
24
252627
29
28
30
3132
33
Downloaded From ManualsPrinter.com Manuals 

2-13
3. Machine Parts and Accessories
Getting to Know Your Machine
Chapter 2
Finisher FN-105/Finisher FN-106
Front Door : Open to clear misfed paper.
Bottom Offset Tray : Receives sorted paper by shifting.
Top Offset Tray : Receives plain paper or thick paper.
Grip : Hold to slide the Finisher away from the machine to clear a misfeed or
perform other service job.19
20
21
22
Finisher FN-5
Front Door : Open to replace the Staple Cartridge or clear misfed paper.
Bottom Offset Tray : Receives sorted/stapled...

2-14
Getting to Know Your Machine
Chapter 2
4. Control Panel Keys and Indicators
Control Panel Keys and Indicators
Touch Panel
 Shows various screens and messages.
See: Using the Touch Panel
 p.2-16
Start Key
 Press to start a scanning cycle.
 Press to start a print cycle.
 Lights up green to accept a print command;
lights up orange to reject one.
10-Key Pad
 Use to set the number of copies to be made.
 Use to set the various numeric values.
Clear Key
 Press to reset the multi-copy entry to 1.
...

2-15
4. Control Panel Keys and Indicators
Getting to Know Your Machine
Chapter 2
Job List Key
 Press to check for the settings made for a job
(Mode Check), modify the settings of a job
(Change), delete a job (Delete), and unlock a job
(Unlock).
p. 3-70
 Press to check for the memory space still
available for use.
 When the lamp is lit up, it indicates that a job has
been reserved.
Ready Lamp
 Lights up to indicate that data can be transferred.
 Indicates whether the machine is connected to an...

2-16
Getting to Know Your Machine
Chapter 2
5. Using the Touch Panel
What is a Touch Panel?
When you turn ON the Power Switch, the Basic screen as shown below appears on the Touch Panel.
It shows in messages and graphics the currently set functions, available functions to choose from, and the
machine status.
* Some of the Touch Panel screens used in the Operator’s Manual may be different from what you
actually will see on your machine.
How the Screen is Organized
4003P137CA
Message Display
Basic...

2-17
5. Using the Touch Panel
Getting to Know Your Machine
Chapter 2
Operating the Touch Panel
You need only to lightly touch the key shown on the Touch Panel to select or activate the function
represented by the key.
NOTE
NEVER press the Touch Panel hard or use a hard or pointed object to press it, as a damaged panel
could result.
4003P315EA
3Basic Function/key
Shows the basic function keys and the
corresponding functions currently selected for
use.
Touching a basic function key shows the
corresponding...